Available finishing equipment

[Jeff Hill]

 

Dear Sirs,

 

We have the following equipment available for sale in Malaysia, equipment previously belonging to Chaudry Textiles, equipment on Mill Floor. Please contact us if you have any interest.

 

Make	Model	Title	Description	Year
Kyoto		Pad Drying Range	2000 mm width on rollers,Edge Guides, Pad Mangle.Gas fired 2 section Pre-Dryer, 2Steam heated Drying Chambers, 3 chill rollers,Plaiter down	1997
Toyo Denki Kyoto		Thermal Baking Range	2000 mm on rollers, Gas fired baking chamber 9m long, Chill roll, plaiter down	1997
		Continuous Pad Steaming Range	2000mm on rollers,Toyo Textra TX200 Weft Straightener,Pneumatic Pad Mangle,Stainless Steel Steam Chamber 4m long with nip rolls,3 vertical & 2 horizontal Stainless Steel wash becks with sqeeze rolls, 2 Stainless steel chambers, beck, squeeze rolls, 3 x 10 Sets Drying cylinders, plaiter, hydraulic big batcher with drive.
Jex	2065H	Jig Dyer	2200mm width, Stainless Steel .	1997
Jex	2065H	Jig Dyer	2200mm width, Stainless Steel .	1997
Kyoto		Compresive Shrinking Range	2000 mm width,Infeed rollers witrh weft guiders, Spray Chamber, staem heated cylinder, 3 bowl horizontal Pad mangle, Blanket dryer with 2 x 1m dia Drying Cylinders,2 chill rolls, Plaiter.
Kusters	222.11.-1800	Cold Pad Batch Dyer	2000mm on rolls,Zollig AVD/R/A2 Batch,with hydraulic unit. Controls Incomplete.	1997
Babcock		Loop Steamer	4100mm width, with Plaiter	1995
Kusters	213.40-2000	3 Bowl Calendar	Textured Steel, Rubber,Polished Steel Bowls, hot oil pump and manifold,Ser/No 300.61107-01	1997
Buser	F7E 1680/28L	Flat bed Screen Printer	7 colour machine (6 printing frames only) 2005mm wide on belt, with AF300B Blade grinder (bed only) Serial No 1289
Babcock	5000-3800	No2 -8 chamber Thermal Oil Stenter Range	Model 5805 Pad mangle, Mahlo RFMC 74aSWeft Straightener,8 x 3m Chambers,Plaiter & Big Batcher. Serial No 165566?94/49/-001.Thermtechnik 15LW Thermal Oil Generator 1744kw/h, 10 bar, 120cum/h, 290 degreesC. 8600 litre oil reciever.	1995
Babcock	5802	Open Width Washing Line	1800mm on rollers, Feed In rollers, All Stainless Steel wash tanks, No 1 Wash Tank Type 5802, 13 roller with squeeze rolls, Nos 2 & 3, similar with 1 set squeeze rolls, main Soaping tank with small dip tank and squeeze rolls, Nos 4 & 5 13 roller wash tanks each with squeeze rolls,Pad Mangel, Big Batcher. Type 5797 1639/22 Heat exchanger unit with GVA VT20-B6 plate heat exchanger, to Tank 1..2 SS Soap/Wash mix tanks with gantry. 10 section control panel and operators panel.
Babcock	5803/D 21220	Open Width Bleaching & Scouring Line	1800mm on rollers, Feed In rollers, All Stainless Steel wash tanks, No 1&2  Wash Tank Type 5803, 13 roller each with squeeze rolls, Single wash tank, Type 5845-1639 Main Vertical Scouring Chamber,Nos 3,4 & 5 Wash tanks, similar, each with 5803 squeeze rolls,  Compensator, Big Batcher. Type 5797 1639/22 Heat exchanger unit with GVA VT20-B6 plate heat exchanger, to Tank 1..2 SS Soap/Wash mix tanks with gantry. 10 section control panel and operators panel.
Babcock -Parex Mather		Singeing & Desizing Machine	1800mm width,3 steam heated drying cylinders, Brushing machine with bag plant, series 5000 Mk8 Face & Face/Back Singeing machine,Type 5930 Stainless Steel 13 roller wash tank, Zollig AVM/F/A2 big batch
Wonpoong (Korea)		Jig Dyer	3005mm on rollers, Stainless Steel Beck
Wonpoong (Korea)		Jig Dyer	3005mm on rollers, Stainless Steel Beck
Mechmar	AS1200/150	Package Steam Boiler	Heavy fuel oi lNu Way burner, Serial no MS 61954	1994
Mechmar	AS2400/150	Package Steam Boiler	Heavy fuel oi lNu Way burner, Serial no MS 61953	1994

 

Yours sincerely

 

Jeff Hill

Tel; +63 2 853 0421

Fax; +63 2 857 2129

Mob; +63 920 983 2456

Full Service Asset Disposal

www.astoca.com

Online Auction Engine

www.asiabidco.com

 

[Jeff]