Serial port ttyS2 opened by UniBone 000000 000000 000000 000000 @ RT-11SJ V04.00 .D 56=5015 .TYPE V4USER.TXT Welcome to RT-11 Version 4. RT-11 V04 provides new hardware support and some major enhancements over Version 3B. Please use the HELP command; it describes the new options in many of the utilities. If you are using a terminal that requires fill characters, modify location 56 with a Deposit command before proceeding with system installation. LA36 DECwriter II and VT52 DECscope terminals do NOT require such modification. .D 56=0 . .COPY CT.MAC RK1:CT.MAC .no response >>>> crashed ############################################################## root@ubws2:~# mc root@ubws2:~/10.03_app_demo/5_applications/pdp11-05/rt11v4# ./rt11v4_rk_shared.sh iarg1=8, iarg2=15 [11:11:35.023813 Inf APP] Printing verbose output. demo - QUniBone UNIBUS test application. Version DBG v1.5.0, compile Dec 20 2022 09:54:31. [11:11:35.028759 Inf APP] Registering Non-PRU GPIO pins. [11:11:35.030211 Inf GPIOS] GPIO0 registers at 44E07000 - 44E07FFF (size = 1000) [11:11:35.031753 Inf GPIOS] GPIO1 registers at 4804C000 - 4804CFFF (size = 1000) [11:11:35.033231 Inf GPIOS] GPIO2 registers at 481AC000 - 481ACFFF (size = 1000) [11:11:35.034722 Inf GPIOS] GPIO3 registers at 481AE000 - 481AEFFF (size = 1000) [11:11:35.039748 Inf APP] Disable DS8641 drivers. [11:11:35.041451 Inf APP] Leave SYSBOOT mode. dc [11:11:35.044950 Inf APP] Connecting to PRU. [11:11:35.047463 Inf DDRMEM] Shared DDR memory: 4194304 bytes available, 4194304 bytes needed. [11:11:35.048878 Inf DDRMEM] Virtual (ARM Linux-side) address: 0xb536c000 [11:11:35.050286 Inf DDRMEM] Physical (PRU-side) address:9d100000 [11:11:35.051565 Inf DDRMEM] 4194304 bytes of UniBone memory allocated [11:11:35.053577 Inf PRU] Loaded and started PRU code with id = 2 [11:11:35.156175 Inf APP] Registering non-PRU pins. [11:11:35.157999 Inf GPIOS] GPIO0 registers at 44E07000 - 44E07FFF (size = 1000) [11:11:35.159539 Inf GPIOS] GPIO1 registers at 4804C000 - 4804CFFF (size = 1000) [11:11:35.161022 Inf GPIOS] GPIO2 registers at 481AC000 - 481ACFFF (size = 1000) [11:11:35.162511 Inf GPIOS] GPIO3 registers at 481AE000 - 481AEFFF (size = 1000) [11:11:35.167862 Inf APP] Disable DS8641 drivers. [11:11:35.169432 Inf APP] Leave SYSBOOT mode. [11:11:35.170824 Inf APP] Registering multiplex bus latches, initialized later by PRU code. [11:11:35.172148 Inf APP] Initializing device register maps. [11:11:35.189088 Inf QUNAPT] QUNIBUSADAPTER::worker(0) started [11:11:35.190973 Inf QUNAPT] Trying to set thread realtime priority = 50 [11:11:35.192542 Inf QUNAPT] Scheduling is at RT priority. [11:11:35.192695 Inf QUNAPT] Thread priority is 50 [11:11:35.206936 Inf pnl] PANEL::worker(0) started [11:11:35.208076 Inf MSSVR] Trying to set thread realtime priority = 50 [11:11:35.208477 Inf MSSVR] Scheduling is at RT priority. [11:11:35.208568 Inf MSSVR] Thread priority is 50 [11:11:35.240829 Inf cpu] CPU stopped [11:11:35.243361 Inf QUNAPT] QUnibusAdapter: Registering device CPU20 [11:11:35.245704 Inf cpu] CPU: DCLO active sd dl11 Current device is "DL11" p p ttyS2 Name Short Value Unit Access Info ---------- ----- ----- ---- -------- ------------------------------------- serialport p ttyS2 writable Linux serial port: "ttyS1" or "ttyS2" en dl11 [11:11:35.260904 Inf cpu] CPU20::worker(0) started [11:11:35.262638 Inf cpu] Trying to set thread realtime priority = 0 [11:11:35.265272 Inf slu] Serial port ttyS2 opened [11:11:35.266122 Inf QUNAPT] QUnibusAdapter: Registering device DL11 pwr [11:11:35.269666 Inf cpu] Scheduling is not RT: neither SCHED_FIFO nor SCHED_RR! [11:11:35.272861 Inf cpu] Thread priority is 0 [11:11:35.274819 Inf slu] DL11::worker(1) started [11:11:35.277285 Inf cpu] CPU: ACLO active [11:11:35.277617 Inf slu] DL11::worker(0) started [11:11:35.278360 Inf slu] Trying to set thread realtime priority = 50 [11:11:35.278534 Inf slu] Scheduling is at RT priority. [11:11:35.278601 Inf slu] Thread priority is 50 [11:11:35.278692 Inf slu] Trying to set thread realtime priority = 50 [11:11:35.278809 Inf slu] Scheduling is at RT priority. [11:11:35.278868 Inf slu] Thread priority is 50 [11:11:35.476446 Inf cpu] CPU: DCLO active [11:11:35.877150 Inf cpu] CPU: ACLO inactive [11:11:35.878058 Inf cpu] ACLO at 000000 [11:11:35.889560 Inf cpu] ACLO inactive: fetch vector <<< <<< Input: waiting for 3000 milli seconds >>> <<< m i Disable memory emulation, size physical memory ... Now emulating UniBone memory in range 000000..757776 with DDR memory. m ll dk.lst Loaded MACRO-11 listing from file "dk.lst" into memory: 61 words from 000000 to 010160. No entry address at "start" label is 17777777777. en rk [11:11:39.160654 Inf QUNAPT] QUnibusAdapter: Registering device rk en rk0 sd rk0 Current device is "rk0" Controller base address = io777400 p emulation_speed 10 Name Short Value Unit Access Info --------------- ----- ----- ---- -------- ------------------------------- emulation_speed es 10 writable 1 = original speed, > 1: faster p image RTRKV4.00 Name Short Value Unit Access Info ----- ----- --------- ---- -------- ------------------------------------------------------------------------ image img RTRKV4.00 writable Path to binary image file. Empty to detach. ".gz" archive also searched. p shared_filesystem RT11 Name Short Value Unit Access Info ----------------- ----- ----- ---- -------- ---------------------------------------------------------- shared_filesystem shfs RT11 writable Encode shared dir in this file system (empty, RT11, XXDP). p shared_dir shared_rk0 [11:11:39.177960 Inf rk0] rk0::worker(0) started [11:11:39.181514 Inf rk] rk::worker(0) started [11:11:39.183156 Inf rk] Trying to set thread realtime priority = 50 [11:11:39.183938 Inf rk] Scheduling is at RT priority. [11:11:39.184038 Inf rk] Thread priority is 50 [11:11:39.184119 WRN rk0] TODO: drive size (trunc!) and unitno may change? Propagate to shared image! Name Short Value Unit Access Info ---------- ----- ---------- ---- -------- --------------------------------------------------------------------------------- shared_dir shd shared_rk0 writable Path to directory with shared files. Created on demand, empty to disable sharing. p Parameters of device rk0: Name Short Value Unit Access Info ----------------- ----- ---------- ---- --------- --------------------------------------------------------------------------------- name name rk0 read only Unique identifier of device type type RK05 read only Type enabled en 1 read only device installed and ready to use? emulation_speed es 10 writable 1 = original speed, > 1: faster verbosity v 4 writable 1 = fatal, 2 = error, 3 = warning, 4 = info, 5 = debug [11:11:39.648068 Inf ImgShr] storageimage_shared->sync_worker() started unit unit 0 read only Unit # of drive capacity cap 0 byte read only Storage capacity image img RTRKV4.00 writable Path to binary image file. Empty to detach. ".gz" archive also searched. shared_dir shd shared_rk0 writable Path to directory with shared files. Created on demand, empty to disable sharing. shared_filesystem shfs RT11 writable Encode shared dir in this file system (empty, RT11, XXDP). activityled al 0 writable Number of LED to used for activity display. en rk1 sd rk1 Current device is "rk1" Controller base address = io777400 p emulation_speed 10 Name Short Value Unit Access Info --------------- ----- ----- ---- -------- ------------------------------- emulation_speed es 10 writable 1 = original speed, > 1: faster p image basic.dsk Name Short Value Unit Access Info ----- ----- --------- ---- -------- ------------------------------------------------------------------------ image img basic.dsk writable Path to binary image file. Empty to detach. ".gz" archive also searched. p shared_filesystem RT11 Name Short Value Unit Access Info ----------------- ----- ----- ---- -------- ---------------------------------------------------------- shared_filesystem shfs RT11 writable Encode shared dir in this file system (empty, RT11, XXDP). p shared_dir shared_rk1 [11:11:39.665819 Inf rk1] rk1::worker(0) started [11:11:39.671741 WRN rk1] TODO: drive size (trunc!) and unitno may change? Propagate to shared image! Name Short Value Unit Access Info ---------- ----- ---------- ---- -------- --------------------------------------------------------------------------------- shared_dir shd shared_rk1 writable Path to directory with shared files. Created on demand, empty to disable sharing. <<< Disk drive now on track after 5 secs <<< <<< Input: waiting for 4000 milli seconds >>> [11:11:40.005380 Inf ImgShr] storageimage_shared->sync_worker() started <<< p Parameters of device rk1: Name Short Value Unit Access Info ----------------- ----- ---------- ---- --------- --------------------------------------------------------------------------------- name name rk1 read only Unique identifier of device type type RK05 read only Type enabled en 1 read only device installed and ready to use? emulation_speed es 10 writable 1 = original speed, > 1: faster verbosity v 4 writable 1 = fatal, 2 = error, 3 = warning, 4 = info, 5 = debug unit unit 1 read only Unit # of drive capacity cap 0 byte read only Storage capacity image img basic.dsk writable Path to binary image file. Empty to detach. ".gz" archive also searched. shared_dir shd shared_rk1 writable Path to directory with shared files. Created on demand, empty to disable sharing. shared_filesystem shfs RT11 writable Encode shared dir in this file system (empty, RT11, XXDP). activityled al 1 writable Number of LED to used for activity display. en cpu20 sd cpu20 Current device is "CPU20" pwr [11:11:44.015544 Inf cpu] CPU: ACLO active double bus error, HALT [11:11:44.017876 Inf cpu] CPU HALT by opcode at 165524 R0 000000 R1 165202 R2 000100 R3 165212 R4 000000 R5 000000 R6 165206 R7 165524 10 000000 11 000000 12 000004 13 000000 14 000000 15 000000 16 000000 17 000000 BA 165206 IR 100375 PSW 344 [11:11:44.216460 Inf cpu] CPU: DCLO active [11:11:44.617189 Inf cpu] CPU: ACLO inactive [11:11:44.618126 Inf cpu] ACLO at 165524 [11:11:44.630175 Inf cpu] ACLO inactive: fetch vector <<< RK drives ready. <<< RK0 content accessible in shared Linux directory "shared_rk0" <<< RK1 content in "shared_rk1" p c 1 Name Short Value Unit Access Info --------------- ----- ----- ---- -------- ------------------------------------------------------------------------ continue_switch c 1 writable CONT action switch: 1 = CPU restart after HALT. CONT+HALT = single step. DC>>>terminate called after throwing an instance of 'std::out_of_range' what(): vector::_M_range_check: __n (which is 724) >= this->size() (which is 724) ./rt11v4_rk_shared.sh: line 3: 4696 Aborted ~/10.03_app_demo/4_deploy/demo --verbose --cmdfile rt11v4_rk_shared.cmd $* root@ubws2:~#