2022/07/11-08:05:19(GMT) Stats: SAT revision 1.0.4_autoconf, 64 bit binary
2022/07/11-08:05:19(GMT) Log: Android version from open source release
Usage: ./sat(32|64) [options]
 -M mbytes        megabytes of ram to test
 --reserve-memory If not using hugepages, the amount of memory to reserve for the system
 -H mbytes        minimum megabytes of hugepages to require
 -s seconds       number of seconds to run
 -m threads       number of memory copy threads to run
 -i threads       number of memory invert threads to run
 -C threads       number of memory CPU stress threads to run
 --findfiles      find locations to do disk IO automatically
 -d device        add a direct write disk thread with block device (or file) 'device'
 -f filename      add a disk thread with tempfile 'filename'
 -l logfile       log output to file 'logfile'
 --no_timestamps  do not prefix timestamps to log messages
 --max_errors n   exit early after finding 'n' errors
 -v level         verbosity (0-20), default is 8
 --printsec secs  How often to print 'seconds remaining'
 -W               Use more CPU-stressful memory copy
 -A               run in degraded mode on incompatible systems
 -p pagesize      size in bytes of memory chunks
 --filesize size  size of disk IO tempfiles
 -n ipaddr        add a network thread connecting to system at 'ipaddr'
 --listen         run a thread to listen for and respond to network threads.
 --no_errors      run without checking for ECC or other errors
 --force_errors   inject false errors to test error handling
 --force_errors_like_crazy   inject a lot of false errors to test error handling
 -F               don't result check each transaction
 --stop_on_errors  Stop after finding the first error.
 --read-block-size     size of block for reading (-d)
 --write-block-size    size of block for writing (-d). If not defined, the size of block for writing will be defined as the size of block for reading
 --segment-size   size of segments to split disk into (-d)
 --cache-size     size of disk cache (-d)
 --blocks-per-segment  number of blocks to read/write per segment per iteration (-d)
 --read-threshold      maximum time (in us) a block read should take (-d)
 --write-threshold     maximum time (in us) a block write should take (-d)
 --random-threads      number of random threads for each disk write thread (-d)
 --destructive    write/wipe disk partition (-d)
 --monitor_mode   only do ECC error polling, no stress load.
 --cc_test        do the cache coherency testing
 --cc_inc_count   number of times to increment the cacheline's member
 --cc_line_count  number of cache line sized datastructures to allocate for the cache coherency threads to operate
 --cc_line_size   override the auto-detected cache line size
 --cpu_freq_test  enable the cpu frequency test (requires the --cpu_freq_threshold argument to be set)
 --cpu_freq_threshold  fail the cpu frequency test if the frequency goes below this value (specified in MHz)
 --cpu_freq_round round the computed frequency to this value, if set to zero, only round to the nearest MHz
 --paddr_base     allocate memory starting from this address
 --pause_delay    delay (in seconds) between power spikes
 --pause_duration duration (in seconds) of each pause
 --local_numa     choose memory regions associated with each CPU to be tested by that CPU
 --remote_numa    choose memory regions not associated with each CPU to be tested by that CPU
 --channel_hash   mask of address bits XORed to determine channel. Mask 0x40 interleaves cachelines between channels
 --channel_width bits     width in bits of each memory channel
 --memory_channel u1,u2   defines a comma-separated list of names for dram packages in a memory channel. Use multiple times to define multiple channels.