I use a switch made by Diamond: http://www.rffun.com/catalog/switch/1636.html.
I like it. Very, very sturdy.
I use the built-in switch on the R-5000. Two is plenty.
I have 5 receivers now and a bunch of Daiwa switches to let me put any
radio on any antenna. There are six antennas:
A Discone (Backup in case my better antennas have problems)
A Windom Dipole outside.
An Alpha Delta Short sloper outside. (It's old and is being replaced
soon with a Slinky)
A Longwire in the attic above the radio room (pretty short)
A really big dipole that is zigzagged from one end of the house to
another.
A home brewed active antenna in the attic above the garage. Better than
most of the actives I've had, but still kind of noisy.
BDK
Roadie - That requires you to have 1 Antenna using
Coax Cable and 1 Antenna using Ladder-Line ~ RHF
http://www.universal-radio.com/catalog/commrxvr/r5000io.jpg
.
.
. .
>FM,
> .
>Antenna Switches - What's In Your Radio Shack ?
>http://groups.yahoo.com/group/Shortwave-SWL-Antenna/message/14553
> .
>I have used the Two and Four Position Alpha Delta Antenna
>Switches for years and they have been trouble free.
>http://www.universal-radio.com/catalog/switch/2415.html
> .
>I also like the Alpha Delta's because all the connections
>are on one side (back) and you do not have to deal with
>the Coax Cable running out the front and routing it around.
> .
>As a Shortwave Radio Listener (SWL) I have my Antenna Switches
>right on the Deck Top next to the Radios and Easy-to-Reach.
> .
>More Antenna Switches to consider . . .
>http://www.universal-radio.com/catalog/switch.html
> .
> .
>hope this helps - iane ~ RHF
Well, I use RG-6 cable for my antennas (2) and use a Ratshack switch -
pushbutton, not as fancy or expensive as the AD or Diamond but it
works and is economical.
RHF wrote:
> FM,
> .
> Antenna Switches - What's In Your Radio Shack ?
> http://groups.yahoo.com/group/Shortwave-SWL-Antenna/message/14553
I have an MFJ-1702 two position switch and an B & W 375 6 position switch.
dxAce
Michigan
USA
Please reread your question. You asked what switches are in your
shack. The R-5000 has a built-in antenna switch. What could be
clearer.
D Peter Maus wrote:
> How's that Eavesdropper working for you?
Not sure! I haven't completed the installation yet. It is in the air, and has
been for a while, but I've not completed the coax run yet.
I was thinking about doing it today, but I had a lot of stuff to take care of
yesterday and my back she no feel too good.
Perhaps tomorrow.
Ye ol' procrastinator,
dxAce
Michigan
USA
- - I use the built-in switch on the R-5000
- - Two is plenty
- Please reread your question.
- You asked what switches are in your shack.
- The R-5000 has a built-in antenna switch.
- What could be clearer.
Roadie,
Yes any Receiver with a 'built-in' Antenna Switch
can make things simpler and clean-up the Deck Top.
- - - You will have a "Nice Looking" Radio Shack.
.
But 'cleaner' is not necessarily a better Radio Shack that
is Set-Up for both "Safe" Operations and Non-Use Periods.
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/message/14607
.
Using an External Antenna Switch using a Short 3-5 Foot
of Coax Cable "Jumper" between the Switch and the
Receiver; allows for easier Removal of the Coax "Jumper"
from the Switch when you Disconnect the Coax : When
the Receiver is Not-in-Use -or- If the Antenna Switch has
a "Common" Not-Connect {Shorted} Postion like the
Alpha Delta Antenna Switches do :
http://www.universal-radio.com/catalog/switch/2415.html
Then It can Save the Time connecting and un-connecting
the Coax each time the Receiver is Used and Not-in-Use.
Plus the Alpha Delta Antenna Switches have a built-in
'surge protector' using a D-4 Arc-Plug Cartridge {GDT}.
.
.
i b switched - iane ~ RHF
Shortwave Listener (SWL) Antennas Group => http://tinyurl.com/ogvcf
.
.
. .
dxAce wrote:
> D Peter Maus wrote:
>
> > How's that Eavesdropper working for you?
>
> Not sure! I haven't completed the installation yet. It is in the air, and has
> been for a while, but I've not completed the coax run yet.
>
> I was thinking about doing it today, but I had a lot of stuff to take care of
> yesterday and my back she no feel too good.
>
> Perhaps tomorrow.
One thing I forgot to add was that my neighbour was up on a job in Rockford, MI
doing some heating and cooling work and he spied a nice aluminium flagpole that
was being thrown away due to some storm damage at the base of it.
We cut off the bad part, (about 1 foot) and it's still 22' long. Now if I sink it
2-3' into the ground in a suitable piece of pipe I'll have a nice free-standing
center support for the Eavesdropper.
More projects is just what I need!
dxAce
Michigan
USA
Would you really want a 22 foot metal center support? Although it may
be one of the world's most extravagant ground lugs...there is that whole
lightning thing.....
D Peter Maus wrote:
Sure, why not. My scanner antenna is on a metal mast a bit higher than that.
Not hit... Yet!
D Peter Maus wrote:
> Oh, well then, screw it. Mount it high and solid, and put a US ensign
> atop, with a flood for night time.
It'll be strictly for the antenna once I get going on that part of the project. But if I
finally decide I'm not happy with the Eavesdropper then I'll either come up with another
antenna project or just use it for a flagpole.
dxAce
Michigan
USA
You'll have to post pictures when you get it up.
D Peter Maus wrote:
> You'll have to post pictures when you get it up.
Yeah, I was thinking about some photos this morning.
Be sure to put a "good" lightning ground unit on the lead!
Burr
You might want to consider using it as a vertical antenna. It would
complement your existing horizontal antennas.
--
Telamon
Ventura, California
Telamon wrote:
I'd only consider using a vertical as a last resort. Been there, done that. They
receive equally poorly in all directions.
dxAce
Michigan
USA
You might want to give it another shot. Antennas at different
orientations will work better at different times of the day/night.
--
Telamon
Ventura, California
Telamon wrote:
Been there, done that. No thanks.
dxAce
Michigan
USA
Have you ever gone the loop route? If so, how did it work for you?
Steve
Steve wrote:
What kind of loop?
I was picturing a big, horizontal 'skywire' type loop, since you've
got some space to work with.
Steve wrote:
No, the only loop I can recall using was a box loop AM broadcast antenna.
dxAce
Michigan
USA
- What kind of loop?
DX Ace,
Did you ever use or consider the K9AY Loop Antenna ?
http://www.wellbrook.uk.com/K9AYc.html
http://www.dxing.info/equipment/k9ay.dx
http://www.hard-core-dx.com/nordicdx/antenna/loop/k9ay/
http://home.comcast.net/~markwa1ion/exaol1/k9ay_ant.htm
.
-or- The "Large Aperture Loop Antenna" ALA 100
by Wellbrook (UK)
http://www.wellbrook.uk.com/ALA100b.html
http://www.wellbrook.uk.com/ALA100Ma.html
http://www.beaconworld.org.uk/files/ALA100review.pdf
.
~ RHF
.
.
. .
RHF wrote:
> > > > - Show quoted text -
> >
> > > Have you ever gone the loop route? If so, how did it work for you?
> >
>
> - What kind of loop?
>
> DX Ace,
>
> Did you ever use or consider the K9AY Loop Antenna ?
> http://www.wellbrook.uk.com/K9AYc.html
> http://www.dxing.info/equipment/k9ay.dx
> http://www.hard-core-dx.com/nordicdx/antenna/loop/k9ay/
> http://home.comcast.net/~markwa1ion/exaol1/k9ay_ant.htm
> .
> -or- The "Large Aperture Loop Antenna" ALA 100
> by Wellbrook (UK)
> http://www.wellbrook.uk.com/ALA100b.html
> http://www.wellbrook.uk.com/ALA100Ma.html
> http://www.beaconworld.org.uk/files/ALA100review.pdf
No.