I need specs for the EA70 stem as well.
I have searched the Easton site and have not been able to find this
info.
Many thanks in advance,
Tob
According to tech support at Easton the EA-70 bar clamp should be to a max
of 70 in-lb with the carbon bar. I found that at 65 in-lb mine still
slipped. This was increased from 65 to 70 between the 2004 and 2005 model
years. I suggest that you also use a mic on the bar. If it is undersized
it won't clamp, but they will swap it for one made to spec (at least in my
case...). Some EA-70's have the torque limits engraved, also.
Jeffrey
Thanks Jeffrey.
Mine is a 2005 and mics OK. I'll torque to 70 and see what hapens.
Thanks again.
Tob