U-Boot 2012.04.01 (Jul 19 2012 - 17:37:11) CPU : OMAP4430 ES2.3 Board: OMAP4 Panda I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. checking for preEnv.txt reading preEnv.txt ** Unable to read "preEnv.txt" from mmc 0:1 ** Hit any key to stop autoboot: 0 reading uEnv.txt ** Unable to read "uEnv.txt" from mmc 0:1 ** reading boot.scr 373 bytes read Loaded script from boot.scr Running bootscript from mmc0 ... ## Executing script at 82000000 reading uImage 4419928 bytes read reading uInitrd 5803338 bytes read ## Booting kernel from Legacy Image at 80000000 ... Image Name: Ubuntu Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4419864 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 81600000 ... Image Name: Ubuntu Initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 5803274 Bytes = 5.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.295043] CPU1: Unknown IPI message 0x1 [ 0.306121] omap_hwmod: mcpdm: _wait_target_ready error: -16 [ 0.352050] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.352081] omap_hwmod_mux_init: Could not allocate device mux entry [ 1.920562] thermal_get_slope:Getting slope is not supported for domain cpu [ 1.928039] thermal_get_offset:Getting offset is not supported for domain cpu [ 1.935729] thermal_get_slope:Getting slope is not supported for domain gpu [ 1.943542] thermal_get_offset:Getting offset is not supported for domain gpu [ 1.951385] stm_fw: vendor driver stm_ti1.0 registered fsck from util-linux 2.20.1 /dev/mmcblk0p2: clean, 83858/482304 files, 1957881/3857408 blocks [ 7.530364] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 * Stopping Setup OMAP4 audio and video[ OK ] * Starting configure network device security[ OK ] * Starting configure network device security[ OK ] [ 10.022125] Unable to handle kernel NULL pointer dereference at virtual address 00000012 [ 10.030670] pgd = c0004000 [ 10.033508] [00000012] *pgd=00000000 [ 10.037292] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 10.042907] Modules linked in: wl12xx(+) wlcore mac80211 cfg80211 omapdce(C) rpmsg_omx omaprpcs [ 10.065795] CPU: 0 Tainted: G WC (3.4.0-1491-omap4 #3-Ubuntu) [ 10.073059] PC is at test_pages_isolated+0x108/0x16c [ 10.078308] LR is at 0x80000 [ 10.081359] pc : [] lr : [<00080000>] psr: 000f0193 [ 10.081359] sp : eb6dfb38 ip : 00000001 fp : eb6dfb5c [ 10.093475] r10: 00099700 r9 : c09301d8 r8 : c0b19f40 [ 10.098968] r7 : 4f95fcf0 r6 : 0009fb00 r5 : c0987564 r4 : 0009c800 [ 10.105865] r3 : c0ec4000 r2 : 00000002 r1 : 600f0113 r0 : c0b34000 [ 10.112762] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 10.120544] Control: 10c5387d Table: abb2004a DAC: 00000015