[ 0.000000] Linux version 3.0.0-rc7-01197-g5b14e37 (dennis@sabayon) (gcc version 4.5.2 (Gentoo 4.5.2 p1.1, pie-0.4.5) ) #1 SMP PREEMPT Tue Jul 19 18:35:20 CST 2011 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Reserving 33554432 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.1 [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000 [ 0.000000] On node 0 totalpages: 239616 [ 0.000000] free_area_init_node: node 0, pgdat c0786060, node_mem_map c0ce8000 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 180736 pages, LIFO batch:31 [ 0.000000] HighMem zone: 512 pages used for memmap [ 0.000000] HighMem zone: 56832 pages, LIFO batch:15 [ 0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to complete transition [ 0.000000] PERCPU: Embedded 7 pages/cpu @c14f8000 s6208 r8192 d14272 u32768 [ 0.000000] pcpu-alloc: s6208 r8192 d14272 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 237568 [ 0.000000] Kernel command line: ro elevator=noop vram=32M root=/dev/sda2 rootwait fixrtc console=ttyO2,115200 mem=456M@0x80000000 mem=512M@0xA0000000 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 456MB 480MB = 936MB total [ 0.000000] Memory: 936588k/936588k available, 54644k reserved, 229376K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .init : 0xc0008000 - 0xc0045000 ( 244 kB) [ 0.000000] .text : 0xc0045000 - 0xc071404c (6973 kB) [ 0.000000] .data : 0xc0716000 - 0xc0787928 ( 455 kB) [ 0.000000] .bss : 0xc078794c - 0xc0ce7014 (5502 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744) [ 0.062500] pid_max: default: 32768 minimum: 301 [ 0.062561] Security Framework initialized [ 0.062561] Mount-cache hash table entries: 512 [ 0.062561] CPU: Testing write buffer coherency: ok [ 0.068695] twd_timer_setup: no clock found [ 0.068695] Calibrating local timer... 491.68MHz. [ 0.109588] L310 cache controller enabled [ 0.109649] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B [ 0.186065] CPU1: Booted secondary processor [ 0.216491] Brought up 2 CPUs [ 0.216491] SMP: Total of 2 processors activated (3963.96 BogoMIPS). [ 0.217956] devtmpfs: initialized [ 0.219757] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw [ 0.228912] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr [ 0.228912] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1 [ 0.228942] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2 [ 0.228942] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe [ 0.228942] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg [ 0.229003] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.229003] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.229034] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private [ 0.229034] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp [ 0.229034] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for ipu [ 0.229034] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. [ 0.237274] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.241638] print_constraints: dummy: [ 0.241790] NET: Registered protocol family 16 [ 0.243133] GPMC revision 6.0 [ 0.249023] omap_device: omap_gpio.0: new worst case activate latency 0: 305175 [ 0.249908] OMAP GPIO hardware version 0.1 [ 0.251068] OMAP GPIO hardware version 0.1 [ 0.252349] OMAP GPIO hardware version 0.1 [ 0.252838] OMAP GPIO hardware version 0.1 [ 0.253326] omap_device: omap_gpio.4: new worst case activate latency 0: 488281 [ 0.253814] OMAP GPIO hardware version 0.1 [ 0.254730] OMAP GPIO hardware version 0.1 [ 0.259582] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.261505] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.265991] omap_device: omap_uart.0: new worst case activate latency 0: 30517 [ 0.267333] omap_device: omap_uart.2: new worst case activate latency 0: 122070 [ 0.268188] omap_device: omap_uart.3: new worst case deactivate latency 0: 61035 [ 0.279632] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.279632] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step. [ 0.279663] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.287719] pm_dbg_init: only OMAP3 supported [ 0.289306] OMAP DMA hardware revision 0.0 [ 0.345062] bio: create slab at 0 [ 0.347412] print_constraints: vwl1271: 1800 mV [ 0.350982] SCSI subsystem initialized [ 0.351348] omap_device: omap2_mcspi.1: new worst case activate latency 0: 213623 [ 0.353271] omap_device: omap2_mcspi.3: new worst case deactivate latency 0: 122070 [ 0.355529] usbcore: registered new interface driver usbfs [ 0.356170] usbcore: registered new interface driver hub [ 0.356628] usbcore: registered new device driver usb [ 0.359222] omap_device: omap_i2c.1: new worst case activate latency 0: 152587 [ 0.359375] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz [ 0.362579] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.363281] twl6030: PIH (irq 39) chaining IRQs 368..387 [ 0.365753] print_constraints: VUSB: 3300 mV normal standby [ 0.565460] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.567199] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.568481] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.569732] print_constraints: VCXIO: 1800 mV normal standby [ 0.570770] print_constraints: VDAC: 1800 mV normal standby [ 0.571990] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.573364] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.574676] print_constraints: CLK32KG: [ 0.575744] print_constraints: VANA: 2100 mV normal standby [ 0.576202] omap_device: omap_i2c.2: new worst case activate latency 0: 457763 [ 0.589843] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz [ 0.605010] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz [ 0.620269] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz [ 0.620819] omap_device: omap_i2c.4: new worst case deactivate latency 0: 91552 [ 0.623016] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.625610] Bluetooth: Core ver 2.16 [ 0.626251] NET: Registered protocol family 31 [ 0.626251] Bluetooth: HCI device and connection manager initialized [ 0.626251] Bluetooth: HCI socket layer initialized [ 0.626403] Bluetooth: L2CAP socket layer initialized [ 0.626586] Bluetooth: SCO socket layer initialized [ 0.630340] Switching to clocksource 32k_counter [ 0.635589] Switched to NOHz mode on CPU #0 [ 0.636169] Switched to NOHz mode on CPU #1 [ 0.638702] cfg80211: Calling CRDA to update world regulatory domain [ 0.700988] musb-hdrc: version 6.0, musb-dma, host [ 0.701232] omap_device: musb-omap2430.-1: new worst case activate latency 0: 183105 [ 0.701446] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.701446] musb-hdrc: MHDRC RTL version 2.0 [ 0.701477] musb-hdrc: setup fifo_mode 4 [ 0.701477] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.701538] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 0.701538] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1 [ 0.701538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.703521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.703521] usb usb1: Product: MUSB HDRC host driver [ 0.703552] usb usb1: Manufacturer: Linux 3.0.0-rc7-01197-g5b14e37 musb-hcd [ 0.703552] usb usb1: SerialNumber: musb-hdrc [ 0.706848] hub 1-0:1.0: USB hub found [ 0.706848] hub 1-0:1.0: 1 port detected [ 0.709350] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124 [ 0.710144] NET: Registered protocol family 2 [ 0.710144] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.712432] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.714599] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) [ 0.725616] TCP: Hash tables configured (established 131072 bind 65536) [ 0.725616] TCP reno registered [ 0.729034] UDP hash table entries: 512 (order: 3, 49152 bytes) [ 0.729034] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes) [ 0.729034] NET: Registered protocol family 1 [ 0.730407] RPC: Registered named UNIX socket transport module. [ 0.731170] RPC: Registered udp transport module. [ 0.731170] RPC: Registered tcp transport module. [ 0.731170] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.731201] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.892028] highmem bounce pool size: 64 pages [ 0.892517] VFS: Disk quotas dquot_6.5.2 [ 0.892517] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.893127] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.894409] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.894989] msgmni has been set to 1381 [ 0.898712] io scheduler noop registered (default) [ 0.898864] io scheduler deadline registered [ 0.898864] io scheduler cfq registered [ 0.962158] OMAP DSS rev 4.0 [ 0.968078] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.334442] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 1.487518] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 1.615051] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.643951] console [ttyO2] enabled [ 2.740203] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.876953] [drm] Initialized drm 1.1.0 20060810 [ 2.903411] brd: module loaded [ 2.917694] loop: module loaded [ 2.927703] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.934997] omap2-nand driver initializing [ 2.939758] OneNAND driver initializing [ 2.946990] usbcore: registered new interface driver smsc95xx [ 2.955474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.962738] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.969879] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2 [ 2.975341] omap_device: musb-omap2430.-1: new worst case deactivate latency 0: 885009 [ 2.986053] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 3.006622] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.006713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.020050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.027709] usb usb2: Product: OMAP-EHCI Host Controller [ 3.027709] usb usb2: Manufacturer: Linux 3.0.0-rc7-01197-g5b14e37 ehci_hcd [ 3.040588] usb usb2: SerialNumber: ehci-omap.0 [ 3.047210] hub 2-0:1.0: USB hub found [ 3.051177] hub 2-0:1.0: 3 ports detected [ 3.084167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.084167] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller [ 3.097900] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 3 [ 3.106018] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800 [ 3.192260] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.199401] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.207000] usb usb3: Product: OMAP3 OHCI Host Controller [ 3.212707] usb usb3: Manufacturer: Linux 3.0.0-rc7-01197-g5b14e37 ohci_hcd [ 3.216491] usb usb3: SerialNumber: ohci-omap3.0 [ 3.226562] hub 3-0:1.0: USB hub found [ 3.226562] hub 3-0:1.0: 3 ports detected [ 3.236602] usbcore: registered new interface driver cdc_wdm [ 3.242553] Initializing USB Mass Storage driver... [ 3.248352] usbcore: registered new interface driver usb-storage [ 3.254669] USB Mass Storage support registered. [ 3.260498] usbcore: registered new interface driver libusual [ 3.268035] mousedev: PS/2 mouse device common for all mice [ 3.279479] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 3.286193] omap_device: omap_i2c.1: new worst case activate latency 0: 6713867 [ 3.296081] i2c /dev entries driver [ 3.303009] Linux video capture interface: v2.00 [ 3.311889] Driver for 1-wire Dallas network protocol. [ 3.318511] omap_device: omap_wdt.-1: new worst case activate latency 0: 274658 [ 3.327514] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 3.334747] Bluetooth: HCI UART driver ver 2.2 [ 3.334777] Bluetooth: HCI H4 protocol initialized [ 3.344482] Bluetooth: HCI BCSP protocol initialized [ 3.349700] Bluetooth: HCILL protocol initialized [ 3.361114] omap_device: omap_i2c.1: new worst case deactivate latency 0: 244140 [ 3.371856] Registered led device: pandaboard::status1 [ 3.372375] Registered led device: pandaboard::status2 [ 3.374298] usbcore: registered new interface driver usbhid [ 3.374298] usbhid: USB HID core driver [ 3.384246] usb 2-1: new high speed USB device number 2 using ehci-omap [ 3.399810] SDP4430 SoC init [ 3.406799] omap_device: aess.-1: new worst case activate latency 0: 2136230 [ 3.417297] omap_device: aess.-1: new worst case deactivate latency 0: 518798 [ 3.432373] omap_device: omap_i2c.1: new worst case deactivate latency 0: 1037597 [ 3.468750] asoc: null-codec-dai <-> MultiMedia1 mapping ok [ 3.477142] asoc: null-codec-dai <-> MultiMedia2 mapping ok [ 3.484680] asoc: null-codec-dai <-> Voice mapping ok [ 3.493347] asoc: null-codec-dai <-> Tones mapping ok [ 3.500549] asoc: null-codec-dai <-> Vibra mapping ok [ 3.506866] asoc: null-codec-dai <-> MODEM mapping ok [ 3.513977] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok [ 3.522674] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok [ 3.528961] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.538391] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok [ 3.546264] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok [ 3.553131] mmc0: new SDHC card at address 7f33 [ 3.559661] usb 2-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.562225] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file [ 3.563446] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok [ 3.564666] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok [ 3.565856] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok [ 3.567413] asoc: twl6040-vib <-> mcpdm-vib mapping ok [ 3.568359] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok [ 3.569702] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok [ 3.571075] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok [ 3.572418] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok [ 3.573913] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok [ 3.574768] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok [ 3.585113] input: Panda Headset Jack as /devices/platform/soc-audio.0/sound/card0/input0 [ 3.596923] Error: Driver 'hdmi-audio-dai' is already registered, aborting... [ 3.596923] OMAP4 HDMI audio SoC init [ 3.598205] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok [ 3.600860] ALSA device list: [ 3.600860] #0: TI OMAP4 Board [ 3.600860] #1: TI OMAP4 HDMI Board [ 3.600982] oprofile: hardware counters not available [ 3.600982] oprofile: using timer interrupt. [ 3.680114] mmcblk0: mmc0:7f33 SD04G 3.69 GiB [ 3.680419] TCP cubic registered [ 3.680419] Initializing XFRM netlink socket [ 3.680541] NET: Registered protocol family 17 [ 3.680541] NET: Registered protocol family 15 [ 3.680847] Bluetooth: RFCOMM TTY layer initialized [ 3.680847] Bluetooth: RFCOMM socket layer initialized [ 3.680847] Bluetooth: RFCOMM ver 1.11 [ 3.680999] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.680999] Bluetooth: BNEP filters: protocol multicast [ 3.680999] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.681976] lib80211: common routines for IEEE802.11 drivers [ 3.681976] lib80211_crypt: registered algorithm 'NULL' [ 3.682037] Registering the dns_resolver key type [ 3.682434] VFP support v0.3: [ 3.747772] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.747772] implementor 41 architecture 3 part 30 variant 9 rev 1 [ 3.747802] ThumbEE CPU extension supported. [ 3.747802] Registering SWP/SWPB emulation handler [ 3.772277] Power Management for TI OMAP4. [ 3.779388] hub 2-1:1.0: USB hub found [ 3.783752] hub 2-1:1.0: 5 ports detected [ 3.791839] mmcblk0: p1 p2 [ 3.819183] Console: switching to colour frame buffer device 80x30 [ 3.836364] omapdss HDMI: fallback to VGA [ 3.889709] omapdss HDMI: cannot lock PLL [ 3.889709] omapdss HDMI: CFG1 0xc00 [ 3.894256] omapdss HDMI: CFG2 0x2004 [ 3.894256] omapdss HDMI: CFG4 0x23955 [ 3.894256] hdmi_pll_init says 65426 [ 3.894287] omapdss HDMI error: failed to power on device [ 3.894287] omapdss error: failed to power on [ 3.906311] regulator_init_complete: VANA: incomplete constraints, leaving on [ 3.906738] regulator_init_complete: CLK32KG: incomplete constraints, leaving on [ 3.907165] regulator_init_complete: VAUX3_6030: incomplete constraints, leaving on [ 3.907592] regulator_init_complete: VAUX2_6030: incomplete constraints, leaving on [ 3.908020] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 3.908416] regulator_init_complete: VCXIO: incomplete constraints, leaving on [ 3.908843] regulator_init_complete: VPP: incomplete constraints, leaving on [ 3.909271] regulator_init_complete: VUSB: incomplete constraints, leaving on [ 3.928588] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:14:13 UTC (946685653) [ 3.939239] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 4.007202] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.008636] mmc1: new SDIO card at address 0001 [ 4.087615] usb 2-1.1: new high speed USB device number 3 using ehci-omap [ 4.173156] Waiting for root device /dev/sda2... [ 4.264282] usb 2-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 4.271636] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.284301] smsc95xx v1.0.4 [ 5.451202] smsc95xx 2-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 76:25:11:61:d1:b9 [ 5.552734] usb 2-1.2: new high speed USB device number 4 using ehci-omap [ 6.069366] usb 2-1.2: New USB device found, idVendor=04b4, idProduct=6830 [ 6.076629] usb 2-1.2: New USB device strings: Mfr=0, Product=57, SerialNumber=44 [ 6.084503] usb 2-1.2: Product: Cypress AT2+LP [ 6.084503] usb 2-1.2: SerialNumber: DEF10C8F24B0 [ 6.096405] scsi0 : usb-storage 2-1.2:1.0 [ 7.296936] scsi 0:0:0:0: Direct-Access WDC WD16 00AABB-56PUA0 0000 PQ: 0 ANSI: 0 [ 7.312988] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 7.321868] sd 0:0:0:0: [sda] Write Protect is off [ 7.326965] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00 [ 7.337402] sd 0:0:0:0: [sda] No Caching mode page present [ 7.343200] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.441192] sd 0:0:0:0: [sda] No Caching mode page present [ 7.446990] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.566375] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 7.657379] sd 0:0:0:0: [sda] No Caching mode page present [ 7.663177] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.669586] sd 0:0:0:0: [sda] Attached SCSI disk [ 65.042633] wl1271: ERROR could not get nvs file: -2 [ 65.048767] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 65.049041] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049041] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 65.049072] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049072] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 65.049102] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049102] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 65.049133] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049133] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 65.049163] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049163] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 65.049194] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049194] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 65.049224] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049224] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 65.049255] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049255] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 65.049285] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049285] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 65.049316] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049316] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 65.049346] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049346] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 65.049346] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049377] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 65.049377] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049407] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 65.049407] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049438] cfg80211: Disabling freq 5035 MHz [ 65.049438] cfg80211: Disabling freq 5040 MHz [ 65.049438] cfg80211: Disabling freq 5045 MHz [ 65.049468] cfg80211: Disabling freq 5055 MHz [ 65.049468] cfg80211: Disabling freq 5060 MHz [ 65.049468] cfg80211: Disabling freq 5080 MHz [ 65.049499] cfg80211: Disabling freq 5170 MHz [ 65.049499] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 65.049530] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049530] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule: [ 65.049530] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049560] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 65.049560] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049591] cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule: [ 65.049591] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049621] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 65.049621] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049652] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule: [ 65.049652] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049652] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 65.049682] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049682] cfg80211: Disabling freq 5260 MHz [ 65.049682] cfg80211: Disabling freq 5280 MHz [ 65.049713] cfg80211: Disabling freq 5300 MHz [ 65.049713] cfg80211: Disabling freq 5320 MHz [ 65.049713] cfg80211: Disabling freq 5500 MHz [ 65.049743] cfg80211: Disabling freq 5520 MHz [ 65.049743] cfg80211: Disabling freq 5540 MHz [ 65.049774] cfg80211: Disabling freq 5560 MHz [ 65.049774] cfg80211: Disabling freq 5580 MHz [ 65.049774] cfg80211: Disabling freq 5600 MHz [ 65.049804] cfg80211: Disabling freq 5620 MHz [ 65.049804] cfg80211: Disabling freq 5640 MHz [ 65.049804] cfg80211: Disabling freq 5660 MHz [ 65.049804] cfg80211: Disabling freq 5680 MHz [ 65.049835] cfg80211: Disabling freq 5700 MHz [ 65.049835] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule: [ 65.049865] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049865] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule: [ 65.049896] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049896] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule: [ 65.049896] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049926] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule: [ 65.049926] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.049957] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule: [ 65.049957] cfg80211: 5735000 KHz - 5835000 KHz @ KHz), (600 mBi, 2000 mBm) [ 65.060394] wl1271: loaded [ 65.064117] wl1271: initialized [ 65.240631] EXT3-fs: barriers not enabled [ 65.259552] kjournald starting. Commit interval 5 seconds [ 65.259552] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 65.259552] VFS: Mounted root (ext3 filesystem) readonly on device 8:2. [ 65.313995] devtmpfs: mounted [ 65.313995] Freeing init memory: 244K [ 77.252929] udevd[859]: starting version 171 [ 95.927185] ------------[ cut here ]------------ [ 95.927185] WARNING: at kernel/irq/handle.c:130 handle_irq_event_percpu+0x15c/0x264() [ 95.927185] irq 379 handler twl_rtc_interrupt+0x0/0x98 enabled interrupts [ 95.927185] Modules linked in: [ 95.927307] [] (unwind_backtrace+0x0/0xe4) from [] (warn_slowpath_common+0x4c/0x64) [ 95.927307] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_fmt+0x2c/0x3c) [ 95.927307] [] (warn_slowpath_fmt+0x2c/0x3c) from [] (handle_irq_event_percpu+0x15c/0x264) [ 95.927307] [] (handle_irq_event_percpu+0x15c/0x264) from [] (handle_irq_event+0x3c/0x5c) [ 95.927307] [] (handle_irq_event+0x3c/0x5c) from [] (handle_simple_irq+0x9c/0xb0) [ 95.927307] [] (handle_simple_irq+0x9c/0xb0) from [] (generic_handle_irq+0x30/0x44) [ 95.927459] [] (generic_handle_irq+0x30/0x44) from [] (twl6030_irq_thread+0xd0/0x148) [ 95.927490] [] (twl6030_irq_thread+0xd0/0x148) from [] (kthread+0x80/0x88) [ 95.927520] [] (kthread+0x80/0x88) from [] (kernel_thread_exit+0x0/0x8) [ 95.927551] ---[ end trace 0577fd951662600e ]--- [ 97.224822] EXT3-fs (sda2): using internal journal [ 97.807495] EXT3-fs: barriers not enabled [ 97.849456] kjournald starting. Commit interval 5 seconds [ 97.865081] EXT3-fs (sda3): using internal journal [ 97.865081] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 106.123718] smsc95xx 2-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 119.197692] Adding 1048572k swap on /swapfile. Priority:-1 extents:279 across:1097952k [ 394.010375] EXT3-fs: barriers not enabled [ 416.316589] kjournald starting. Commit interval 5 seconds [ 416.316619] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended [ 416.323699] EXT3-fs (sda1): using internal journal [ 416.323730] EXT3-fs (sda1): recovery complete [ 416.330505] EXT3-fs (sda1): mounted filesystem with ordered data mode [38867.443023] UDP: bad checksum. From 60.29.5.171:49209 to 192.168.90.250:6650 ulen 10 [39786.793334] UDP: bad checksum. From 60.29.5.171:49209 to 192.168.90.250:6650 ulen 10 [41948.481994] omap_device: aess.-1: new worst case activate latency 0: 6866455 [42070.652008] omap_device: aess.-1: new worst case activate latency 0: 13458251