Windows PowerShell
Copyright (C) Microsoft Corporation. Alle Rechte vorbehalten.

Lernen Sie das neue plattformübergreifende PowerShell kennen – https://aka.ms/pscore6

PS G:\PRIVAT\Bestückungsautomat\Marlin\Marlin-9axis_pull> platformio run -e BIGTREE_OCTOPUS_V1_0
Processing BIGTREE_OCTOPUS_V1_0 (platform: ststm32@~12.1; board: marlin_BigTree_octopus_v1; framework: arduino)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/ststm32/marlin_BigTree_octopus_v1.html
PLATFORM: ST STM32 (12.1.1) > STM32F446ZE (128k RAM. 512k Flash)
HARDWARE: STM32F446ZET6 180MHz, 128KB RAM, 512KB Flash
DEBUG: Current (blackmagic) External (blackmagic, jlink, stlink)
PACKAGES:
 - framework-arduinoststm32 4.10900.200819 (1.9.0)
 - framework-cmsis 2.50501.200527 (5.5.1)
 - toolchain-gccarmnoneeabi 1.90201.191206 (9.2.1)
Converting Marlin.ino
LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 11 compatible libraries
Scanning dependencies...
Dependency Graph
|-- <TMCStepper> 0.7.3
|   |-- <SoftwareSerial> 1.0
|   |-- <SPI> 1.0
|-- <SPI> 1.0
|-- <Servo> 1.1.2
|-- <SoftwareSerial> 1.0
|-- <IWatchdog> 1.0.0
|-- <Wire> 1.0
|-- <EEPROM> 2.0.1
Building in release mode
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduinoVariant\PeripheralPins.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduinoVariant\variant.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\HardwareSerial.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\HardwareTimer.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\IPAddress.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\Print.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\RingBuffer.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\Stream.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\Tone.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\USBSerial.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\VirtIOSerial.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\WInterrupts.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\WMath.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\WSerial.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\WString.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\abi.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\avr\dtostrf.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\board.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\hooks.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\itoa.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\main.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\new.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\pins_arduino.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\device.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\generic\condition.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\generic\cortexm\sys.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\generic\generic_device.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\generic\generic_init.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\generic\generic_io.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\generic\generic_shmem.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\generic\time.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\init.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\io.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\log.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\libmetal\shmem.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\mbox_ipcc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\open-amp\remoteproc\remoteproc_virtio.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\open-amp\rpmsg\rpmsg.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\open-amp\rpmsg\rpmsg_virtio.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\openamp.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\rsc_table.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\virt_uart.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\virtio\virtio.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\virtio\virtqueue.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\virtio_buffer.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\OpenAMP\virtio_log.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\startup_stm32yyxx.S.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\cdc\cdc_queue.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\cdc\usbd_cdc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\cdc\usbd_cdc_if.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\hid\usbd_hid_composite.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\hid\usbd_hid_composite_if.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\usb_device_core.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\usb_device_ctlreq.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\usb_device_ioreq.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\usbd_conf.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\usbd_desc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\usbd_ep_conf.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\stm32\usb\usbd_if.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\wiring_analog.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\wiring_digital.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\wiring_pulse.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\wiring_shift.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\FrameworkArduino\wiring_time.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_adc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_adc_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_can.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_cec.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_comp.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_comp_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_cordic.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_cortex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_crc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_crc_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_cryp.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_cryp_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dac.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dac_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dcmi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dcmi_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dfsdm.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dfsdm_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dma.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dma2d.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dma_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dsi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_dts.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_eth.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_eth_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_exti.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_fdcan.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_firewall.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_flash.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_flash_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_flash_ramfunc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_fmac.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_fmpi2c.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_fmpi2c_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_gfxmmu.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_gpio.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_gpio_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_hash.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_hash_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_hcd.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_hrtim.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_hsem.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_i2c.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_i2c_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_i2s.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_i2s_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_ipcc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_irda.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_iwdg.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_jpeg.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_lcd.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_lptim.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_ltdc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_ltdc_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_mdios.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_mdma.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_mmc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_mmc_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_nand.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_nor.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_opamp.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_opamp_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_ospi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_otfdec.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_pccard.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_pcd.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_pcd_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_pka.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_pssi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_pwr.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_pwr_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_qspi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_ramecc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_rcc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_rcc_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_rng.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_rng_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_rtc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_rtc_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_sai.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_sai_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_sd.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_sd_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_sdadc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_sdram.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_smartcard.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_smartcard_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_smbus.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_spdifrx.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_spi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_spi_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_sram.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_swpmi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_tim.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_tim_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_tsc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_uart.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_uart_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_usart.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_usart_ex.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\HAL\stm32yyxx_hal_wwdg.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_adc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_bdma.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_comp.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_cordic.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_crc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_crs.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_dac.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_delayblock.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_dma.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_dma2d.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_exti.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_fmac.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_fmc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_fsmc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_gpio.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_hrtim.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_i2c.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_lptim.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_lpuart.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_mdma.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_opamp.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_pka.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_pwr.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_rcc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_rng.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_rtc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_sdmmc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_spi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_swpmi.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_tim.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_ucpd.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_usart.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_usb.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\LL\stm32yyxx_ll_utils.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\PortNames.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\analog.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\bootloader.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\clock.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\core_callback.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\dwt.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\hw_config.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\interrupt.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\lock_resource.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\low_power.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\pinmap.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\rtc.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\stm32_def.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\stm32_eeprom.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\system_stm32yyxx.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\timer.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\stm32\uart.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\SrcWrapper\src\syscalls.c.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\HAL.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\HAL_MinSerial.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\HAL_SPI.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\MarlinSPI.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\MarlinSerial.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\Sd2Card_sdio_stm32duino.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\Servo.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\eeprom_flash.cpp.o
Compiling .pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\eeprom_sdcard.cpp.o
In file included from Marlin\src\HAL\STM32\../../inc/../HAL/HAL.h:30,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:31,
                 from Marlin\src\HAL\STM32\MarlinSerial.cpp:21:
Marlin\src\HAL\STM32\../../inc/../HAL/./STM32/HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/../HAL/HAL.h:30,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:31,
                 from Marlin\src\HAL\STM32\HAL_SPI.cpp:25:
Marlin\src\HAL\STM32\../../inc/../HAL/./STM32/HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/../HAL/HAL.h:30,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:31,
                 from Marlin\src\HAL\STM32\Sd2Card_sdio_stm32duino.cpp:24:
Marlin\src\HAL\STM32\../../inc/../HAL/./STM32/HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/../HAL/HAL.h:30,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:31,
                 from Marlin\src\HAL\STM32\Servo.cpp:25:
Marlin\src\HAL\STM32\../../inc/../HAL/./STM32/HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\MarlinSPI.h:24,
                 from Marlin\src\HAL\STM32\MarlinSPI.cpp:24:
Marlin\src\HAL\STM32\HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:49,
                 from Marlin\src\HAL\STM32\MarlinSerial.cpp:21:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:2781:4: error: #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
 2781 |   #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:49,
                 from Marlin\src\HAL\STM32\HAL_SPI.cpp:25:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:2781:4: error: #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
 2781 |   #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:49,
                 from Marlin\src\HAL\STM32\Sd2Card_sdio_stm32duino.cpp:24:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:2781:4: error: #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
 2781 |   #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\HAL.cpp:25:
Marlin\src\HAL\STM32\HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:49,
                 from Marlin\src\HAL\STM32\Servo.cpp:25:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:2781:4: error: #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
 2781 |   #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/../HAL/HAL.h:30,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:31,
                 from Marlin\src\HAL\STM32\eeprom_flash.cpp:25:
Marlin\src\HAL\STM32\../../inc/../HAL/./STM32/HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:49,
                 from Marlin\src\HAL\STM32\HAL.cpp:28:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:2781:4: error: #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
 2781 |   #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
      |    ^~~~~
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:49,
                 from Marlin\src\HAL\STM32\eeprom_flash.cpp:25:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:2781:4: error: #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
 2781 |   #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
      |    ^~~~~
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\MarlinSPI.cpp.o] Error 1
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:572:26: error: static assertion failed: AXIS_RELATIVE_MODES must contain X Y Z I J K M O E elements.
  572 | static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1717:28: error: static assertion failed: HOMING_BUMP_MM must have X Y Z I J K K M elements (and no others).
 1717 |   static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfigPre.h:37,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:28,
                 from Marlin\src\HAL\STM32\MarlinSerial.cpp:21:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1722:31: error: non-constant condition for static assertion
 1722 |     static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
      |                   ~~~~~~~~~~~~^~~~
Marlin\src\HAL\STM32\../../inc/../core/macros.h:269:47: note: in definition of macro 'CODE_8'
  269 | #define CODE_8( A,B,C,D,E,F,G,H,...) A; B; C; D; E; F; G; H
      |                                               ^
Marlin\src\HAL\STM32\../../inc/../core/macros.h:278:24: note: in expansion of macro '_CODE_N'
  278 | #define CODE_N(N,V...) _CODE_N(N,V)
      |                        ^~~~~~~
Marlin\src\HAL\STM32\../../inc/../core/types.h:43:32: note: in expansion of macro 'CODE_N'
   43 | #define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
      |                                ^~~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1718:3: note: in expansion of macro 'LINEAR_AXIS_CODE'
 1718 |   LINEAR_AXIS_CODE(
      |   ^~~~~~~~~~~~~~~~
compilation terminated due to -fmax-errors=5.
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:572:26: error: static assertion failed: AXIS_RELATIVE_MODES must contain X Y Z I J K M O E elements.
  572 | static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1717:28: error: static assertion failed: HOMING_BUMP_MM must have X Y Z I J K K M elements (and no others).
 1717 |   static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfigPre.h:37,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:28,
                 from Marlin\src\HAL\STM32\HAL_SPI.cpp:25:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1722:31: error: non-constant condition for static assertion
 1722 |     static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
      |                   ~~~~~~~~~~~~^~~~
Marlin\src\HAL\STM32\../../inc/../core/macros.h:269:47: note: in definition of macro 'CODE_8'
  269 | #define CODE_8( A,B,C,D,E,F,G,H,...) A; B; C; D; E; F; G; H
      |                                               ^
Marlin\src\HAL\STM32\../../inc/../core/macros.h:278:24: note: in expansion of macro '_CODE_N'
  278 | #define CODE_N(N,V...) _CODE_N(N,V)
      |                        ^~~~~~~
Marlin\src\HAL\STM32\../../inc/../core/types.h:43:32: note: in expansion of macro 'CODE_N'
   43 | #define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
      |                                ^~~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1718:3: note: in expansion of macro 'LINEAR_AXIS_CODE'
 1718 |   LINEAR_AXIS_CODE(
      |   ^~~~~~~~~~~~~~~~
compilation terminated due to -fmax-errors=5.
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\MarlinSerial.cpp.o] Error 1
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:572:26: error: static assertion failed: AXIS_RELATIVE_MODES must contain X Y Z I J K M O E elements.
  572 | static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1717:28: error: static assertion failed: HOMING_BUMP_MM must have X Y Z I J K K M elements (and no others).
 1717 |   static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfigPre.h:37,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:28,
                 from Marlin\src\HAL\STM32\Sd2Card_sdio_stm32duino.cpp:24:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1722:31: error: non-constant condition for static assertion
 1722 |     static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
      |                   ~~~~~~~~~~~~^~~~
Marlin\src\HAL\STM32\../../inc/../core/macros.h:269:47: note: in definition of macro 'CODE_8'
  269 | #define CODE_8( A,B,C,D,E,F,G,H,...) A; B; C; D; E; F; G; H
      |                                               ^
Marlin\src\HAL\STM32\../../inc/../core/macros.h:278:24: note: in expansion of macro '_CODE_N'
  278 | #define CODE_N(N,V...) _CODE_N(N,V)
      |                        ^~~~~~~
Marlin\src\HAL\STM32\../../inc/../core/types.h:43:32: note: in expansion of macro 'CODE_N'
   43 | #define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
      |                                ^~~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1718:3: note: in expansion of macro 'LINEAR_AXIS_CODE'
 1718 |   LINEAR_AXIS_CODE(
      |   ^~~~~~~~~~~~~~~~
compilation terminated due to -fmax-errors=5.
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\HAL_SPI.cpp.o] Error 1
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\Sd2Card_sdio_stm32duino.cpp.o] Error 1
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:572:26: error: static assertion failed: AXIS_RELATIVE_MODES must contain X Y Z I J K M O E elements.
  572 | static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1717:28: error: static assertion failed: HOMING_BUMP_MM must have X Y Z I J K K M elements (and no others).
 1717 |   static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfigPre.h:37,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:28,
                 from Marlin\src\HAL\STM32\Servo.cpp:25:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1722:31: error: non-constant condition for static assertion
 1722 |     static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
      |                   ~~~~~~~~~~~~^~~~
Marlin\src\HAL\STM32\../../inc/../core/macros.h:269:47: note: in definition of macro 'CODE_8'
  269 | #define CODE_8( A,B,C,D,E,F,G,H,...) A; B; C; D; E; F; G; H
      |                                               ^
Marlin\src\HAL\STM32\../../inc/../core/macros.h:278:24: note: in expansion of macro '_CODE_N'
  278 | #define CODE_N(N,V...) _CODE_N(N,V)
      |                        ^~~~~~~
Marlin\src\HAL\STM32\../../inc/../core/types.h:43:32: note: in expansion of macro 'CODE_N'
   43 | #define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
      |                                ^~~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1718:3: note: in expansion of macro 'LINEAR_AXIS_CODE'
 1718 |   LINEAR_AXIS_CODE(
      |   ^~~~~~~~~~~~~~~~
compilation terminated due to -fmax-errors=5.
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\Servo.cpp.o] Error 1
In file included from Marlin\src\HAL\STM32\../../inc/../HAL/HAL.h:30,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:31,
                 from Marlin\src\HAL\STM32\eeprom_sdcard.cpp:28:
Marlin\src\HAL\STM32\../../inc/../HAL/./STM32/HAL.h:58:4: error: #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
   58 |   #error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
      |    ^~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:572:26: error: static assertion failed: AXIS_RELATIVE_MODES must contain X Y Z I J K M O E elements.
  572 | static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1717:28: error: static assertion failed: HOMING_BUMP_MM must have X Y Z I J K K M elements (and no others).
 1717 |   static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfigPre.h:37,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:28,
                 from Marlin\src\HAL\STM32\eeprom_flash.cpp:25:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1722:31: error: non-constant condition for static assertion
 1722 |     static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
      |                   ~~~~~~~~~~~~^~~~
Marlin\src\HAL\STM32\../../inc/../core/macros.h:269:47: note: in definition of macro 'CODE_8'
  269 | #define CODE_8( A,B,C,D,E,F,G,H,...) A; B; C; D; E; F; G; H
      |                                               ^
Marlin\src\HAL\STM32\../../inc/../core/macros.h:278:24: note: in expansion of macro '_CODE_N'
  278 | #define CODE_N(N,V...) _CODE_N(N,V)
      |                        ^~~~~~~
Marlin\src\HAL\STM32\../../inc/../core/types.h:43:32: note: in expansion of macro 'CODE_N'
   43 | #define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
      |                                ^~~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1718:3: note: in expansion of macro 'LINEAR_AXIS_CODE'
 1718 |   LINEAR_AXIS_CODE(
      |   ^~~~~~~~~~~~~~~~
compilation terminated due to -fmax-errors=5.
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\eeprom_flash.cpp.o] Error 1
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:572:26: error: static assertion failed: AXIS_RELATIVE_MODES must contain X Y Z I J K M O E elements.
  572 | static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1717:28: error: static assertion failed: HOMING_BUMP_MM must have X Y Z I J K K M elements (and no others).
 1717 |   static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
In file included from Marlin\src\HAL\STM32\HAL.h:27,
                 from Marlin\src\HAL\STM32\HAL.cpp:25:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1722:31: error: non-constant condition for static assertion
 1722 |     static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
      |                   ~~~~~~~~~~~~^~~~
Marlin\src\HAL\STM32\../../core/macros.h:269:47: note: in definition of macro 'CODE_8'
  269 | #define CODE_8( A,B,C,D,E,F,G,H,...) A; B; C; D; E; F; G; H
      |                                               ^
Marlin\src\HAL\STM32\../../core/macros.h:278:24: note: in expansion of macro '_CODE_N'
  278 | #define CODE_N(N,V...) _CODE_N(N,V)
      |                        ^~~~~~~
Marlin\src\HAL\STM32\../../inc/../core/types.h:43:32: note: in expansion of macro 'CODE_N'
   43 | #define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
      |                                ^~~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1718:3: note: in expansion of macro 'LINEAR_AXIS_CODE'
 1718 |   LINEAR_AXIS_CODE(
      |   ^~~~~~~~~~~~~~~~
compilation terminated due to -fmax-errors=5.
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\HAL.cpp.o] Error 1
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:49,
                 from Marlin\src\HAL\STM32\eeprom_sdcard.cpp:28:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:2781:4: error: #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
 2781 |   #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
      |    ^~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:572:26: error: static assertion failed: AXIS_RELATIVE_MODES must contain X Y Z I J K M O E elements.
  572 | static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1717:28: error: static assertion failed: HOMING_BUMP_MM must have X Y Z I J K K M elements (and no others).
 1717 |   static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
In file included from Marlin\src\HAL\STM32\../../inc/MarlinConfigPre.h:37,
                 from Marlin\src\HAL\STM32\../../inc/MarlinConfig.h:28,
                 from Marlin\src\HAL\STM32\eeprom_sdcard.cpp:28:
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1722:31: error: non-constant condition for static assertion
 1722 |     static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
      |                   ~~~~~~~~~~~~^~~~
Marlin\src\HAL\STM32\../../inc/../core/macros.h:269:47: note: in definition of macro 'CODE_8'
      |                                               ^
Marlin\src\HAL\STM32\../../inc/../core/macros.h:278:24: note: in expansion of macro '_CODE_N'
  278 | #define CODE_N(N,V...) _CODE_N(N,V)
      |                        ^~~~~~~
Marlin\src\HAL\STM32\../../inc/../core/types.h:43:32: note: in expansion of macro 'CODE_N'
   43 | #define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
      |                                ^~~~~~
Marlin\src\HAL\STM32\../../inc/SanityCheck.h:1718:3: note: in expansion of macro 'LINEAR_AXIS_CODE'
 1718 |   LINEAR_AXIS_CODE(
      |   ^~~~~~~~~~~~~~~~
compilation terminated due to -fmax-errors=5.
*** [.pio\build\BIGTREE_OCTOPUS_V1_0\src\src\HAL\STM32\eeprom_sdcard.cpp.o] Error 1
=============================================================================================================================================== [FAILED] Took 29.18 seconds =============================================================================================================================================== 

Environment           Status    Duration
--------------------  --------  ------------
BIGTREE_OCTOPUS_V1_0  FAILED    00:00:29.185
========================================================================================================================================== 1 failed, 0 succeeded in 00:00:29.185 ========================================================================================================================================== 
PS G:\PRIVAT\Bestückungsautomat\Marlin\Marlin-9axis_pull> echo "done" >C:\Users\CHRIST~1\AppData\Local\Temp\ipc
PS G:\PRIVAT\Bestückungsautomat\Marlin\Marlin-9axis_pull>