#Widget Parameters
#Description
#dmxusbpro_break_time	 DMX output break time in 10.67 microsecond units. Valid range is 9 to 127. (default = 9)
#dmxusbpro_mab_time	 DMX output Mark After Break time in 10.67 microsecond units. Valid range is 1 to 127. #(default = 1)
#dmxusbpro_refresh_rate	 DMX output rate in packets per second. 0 for fastest rate possible. (default = 40)
#dmx_send_to_host_throttle	 DMX receive rate throttling option in updates per second. 0 is as fast as possible. #(default = 0)
#widget_mode	 See table below for the supported values
#"widget_mode"	 Description
#0	 Mode 1 + 2 
#1	 Normal DMX firmware. Supports all messages except Send RDM (label=7), Send RDM Discovery Request(label=11) #and receive RDM .
#2	 RDM firmware. This enables the Widget to act as an RDM Controller. (default)
#3	 RDM Sniffer firmware. This is for use with the Openlighting RDM packet monitoring application.
#Example:
##dmxusbpro_break_time=
##dmxusbpro_mab_time=
##dmxusbpro_refresh_rate=0
#widget_mode=0
##dmx_send_to_host_throttle=20

#dmxusbpro_break_time=
#dmxusbpro_mab_time=
#dmxusbpro_refresh_rate=0
widget_mode=0
#dmx_send_to_host_throttle=20