Now it cannot boot into safe mode, as it gives an error message that
Windows Setup cannot run in Safemode.
I have a PE disk that I can use to access the files -- which ones do I
need to delete so XP Setup does not restart? Then I could boot into
Safe Mode again, and continue the attempts to repair this beast.
Replace the memory with known good memory and try to continue your repair
installation.
--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html
My question remains: following the screen where the XP installation files
are copied from the CD to the hard drive (during a repair install), and
before the appearance of the screen (following reboot) where those files
begin to be installed -- what are the steps to cancel XP installation?
With Windows ME, 98, and 95, one could simply wipe out a folder and correct
AUTOEXEC.BAT -- and various notes in other newsgroups/forums indicate a
similar step with BOOT.INI (using BOOTCFG.EXE in Recovery Mode) -- which I
have done, but it still persists in attempting to continue the repair install.
I realized, after the fact, that I haven't tried the Driver Verifier utility
in Windows XP (http://support.microsoft.com/?kbid=244617&sd=RMVP), and I
would like to do so, if only I could break out of this loop, and get back to
Safe Mode.
Shenan Stanley wrote:
> Replace the memory with known good memory and try to continue your
> repair installation.
Greg Kirkpatrick [SBSC,MCTS-Vista,MCITP] wrote:
> If RAM was an issue (it's not, I have tested it with Windows Memory
> Diagnostic and MEMTEST86), then replacing it could be all that
> would be necessary, not a full repair install. Anyway, that wasn't
> my question, nor is that relevant for this particular problem.
>
> My question remains: following the screen where the XP installation
> files
> are copied from the CD to the hard drive (during a repair install),
> and before the appearance of the screen (following reboot) where
> those files begin to be installed -- what are the steps to cancel
> XP installation?
>
> With Windows ME, 98, and 95, one could simply wipe out a folder and
> correct AUTOEXEC.BAT -- and various notes in other
> newsgroups/forums indicate a similar step with BOOT.INI (using
> BOOTCFG.EXE in Recovery Mode) -- which I have done, but it still
> persists in attempting to continue the repair install.
>
> I realized, after the fact, that I haven't tried the Driver
> Verifier utility in Windows XP
> (http://support.microsoft.com/?kbid=244617&sd=RMVP), and I would
> like to do so, if only I could break out of this loop, and get back
> to Safe Mode.
Alphabet soup added for effect...? *grin*
In any case - I suggest Method 5 - continue install...
http://support.microsoft.com/kb/330182
(If you think you know what driver may be causing the issue - just diable
that service.)
For your direct question - I am not so sure you can - I believe that you had
gotten pretty far into the repair.
If I knew which driver to disable, I would have. I tried over many hours,
turning off successive drivers and startup items, and removing .SYS files,
before I began the repair install.
As for my question about aborting the XP (re)install, I know there is a way,
because I have done it previously, however I cannot find my notes on the
procedure. Since the reboot (following the copying of files from the CD) had
not been successful, the installation had not really started yet, and it
should have been possible to abort it then.
Following the directions for removing all the drivers created after
8/13/2001 had the effect of another error, this one crying for the absence of
NTFS.SYS -- and having already gone through this during my previous
diagnostics, I realized the instructions were out of date, and added back all
the files whose "Company" name was "Microsoft". Only then would XP Setup
resume.
Then, Setup stops, asking for the location of the file ASMS -- which doesn't
exist, but a directory named ASMS exists in the I386 folder on the XP CD.
When I finally clicked CANCEL, Setup stopped for good.
I was able to find this Knowledge Base article on the ASMS error:
"The file 'Asms' on Windows XP Professional CD-ROM is needed" error message
when you install Windows XP
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q311755&ID=KB;EN-US;Q311755&LN=EN-US&rnk=23&SD=gn&FR=1&qry=&src=DHCS_MSPSS_gn_SRCH&SPR=WINXP&
Having followed the steps to delete the UPPERFILTERS and LOWERFILTERS keys
from the appropriate registry entries, and rebooted, Setup began again, and
while it asked for the ASMS file again (I removed the CD), I was able to
point the installation to C:\WMC2005\I386 (because I had long ago copied the
installation files to the hard drive) and things went relatively smoothly
after that.
That is, until Setup went to BSOD at the 37 minute mark.
This time, a Complete memory dump was created (which wasn't happening with
earlier crashes, despite the option being selected there), so now I have
something to look at using Debugging Tools for Windows.
The "alphabet soup" was left off my original note, as I entered the
newsgroup via the Google backdoor. When I reentered via the Microsoft
Community links, it asked me to log in, and thus added my regular "name". I
decided long ago to put my credentials next to my name, rather than have a
signature (like yours).
I earned my alphabets, as I'm sure you earned yours (MS-MVP).
Greg Kirkpatrick [SBSC,MCTS-Vista,MCITP] wrote:
<snip>
> The "alphabet soup" was left off my original note, as I entered the
> newsgroup via the Google backdoor. When I reentered via the
> Microsoft Community links, it asked me to log in, and thus added my
> regular "name". I decided long ago to put my credentials next to
> my name, rather than have a signature (like yours).
> I earned my alphabets, as I'm sure you earned yours (MS-MVP).
The MS-MVP is an award earned by myself (and others) due to participation in
these newsgroups (Microsoft)... Due to that fact, I chose to post that in
my signature.
http://mvp.support.microsoft.com/gp/mvpawardintro
Of the tests/initials/etc I have taken/earned - I list none of them here -
as to be honest - I have found many of them to be non-representative of what
someone may/may not know. ;-)
Tried this?
Recovery Console --> bootcfg /list --> bootcfg /rebuild --> Add the Windows
install it finds (if it does) --> the load identifier is likely "Microsoft
Windows XP Professional" or "Microsoft Windows XP Home Edition" --> the Load
options will be /fastdetect ...
XP Setup goes to BSOD immediately following splash screen. Same error, 0x7E.
I went back and removed all drivers created after 8/10/2004, and Setup
resumed, but with the ASMS error again. This time, going into the registry
did no good, as there were no UPPERFILTERS or LOWERFILTERS keys. As before,
I pointed Setup to C:\WMC2005\I386, and it was happy (as long as I kept
feeding it the C:\WMC2005\I386 for each file it wanted, about 20 of em),
until it started up with Installing Devices. This time, it got to 34 minutes
before BSOD.
Yes, I tried using BOOTCFG.EXE in Recovery Mode to correct BOOT.INI (some
hours ago) -- but I got no different results. [Yes, I know about the MVP
program. ]
I am going to try removing all the hardware from the machine, then going
through Setup.
c:\$win_nt$.~bt\bootsect.dat
John
Later this morning, I will pull all the hardware out, then retry Setup.
The customer was using LimeWire, and I don't doubt he got an extra payload
on a downloaded movie clip. In his case, he may not have requested the
keylogger, but I still consider this a self-infliction.
Since everything I've tried has failed, I am going to recopy the older image
to the 1st hard drive, set up it, and explain to the customer the evils of
"free" downloads. He'll have to reinstall several programs, but this is a
small penance.