I have not seen any response to my yesterday repost of this same
request. Of course, I never saw any responses before to this same
problem of mine. Risking chastisement, and because I really need help
on this networking problem, this is a re-post but to a different NG.
Thanks for your patience.
(Quote)
Made it in my downloaded headers this time!
Answer(s) on my networking problem will be appreciated.
Frederick
On Sat, 15 Oct 2011 08:17:02 -0400, Frederick <
ro...@dodger.com>
wrote:
>Sorry about this repost. I need to see if it makes it this time.
>Someone was critical and said the first post had been answered. My
>post and that or those replies do not show in my header downloads.
>No idea why not. All I want is the replies dealing with my stated
>networking problem. Apparently my Agent has a mind of its own.
>
>I tried reposting this to alt.test and it failed to appear there also.
>I then tried a few posts of parts of the texts - they all appeared in
>my alt.test header downloads just fine. I then tried a second repost
>to alt test of the entire original post AND IT SHOWED UP JUST FINE
>ALSO. Leaves me quite confused.
>
>Anyway here goes again - My original post of yesterday. Let's see if
>it shows up. If it does, I will post that fact, and ask any
>responders from yesterday to please respond again.
>
>Thanks
>
>Be nice please
>
>Frederick
>
>
>=========================================================
>
>I currently have three XP (P3) machines networked together via CAT5 to
>a wireless router. I call them machine-1, machine-2 and machine-3.
>All are in Workgroup 'MYHOME'. All folders & files on all 3 machines
>are set to file sharing, allowing all user mods to same.
>
>'My Network Places' on machine-1 shows all content of machine-2, and
>allows accessing/changing to same. It does NOT show machine-3 at all.
>
>'My Network Places' on machine-2 shows all content of machine-2 &
>machine-3, and allows accessing/changing to same. This is as it
>should be.
>
>'My Network Places' on machine-3 shows all content of machine-1 &
>machine-2, and allows accessing/changing to same. This is as it
>should be.
>
>So, basically, my problem is that I cannot access the content of
>machine-3 from machine-1, and I cannot figure out why not. I have
>tried several things - to no avail. It seems strange to me that
>machine-3 seems set up correctly enough to link both ways with
>machine-2, but only one way with machine-1. Otherwise, my network
>seems to work fine.
>
>Looking for help.
>
>Thanks
>
>Frederick