Hama PC-Webcam AC-150 Vendor 0c45 id 6142

[Cerus]

Hi,

i need help with a new Hama PC-Webcam AC-150.

dmesg:

New USB device found, idVendor=0c45, idProduct=6142
New USB device strings: Mfr=0, Product=1, SerialNumber=0
Product: USB camera

lsusb:

ID 0c45:6142 Microdia

I use Nslu with Debian Kernel 2.6.26-1-ixp4xx

I found http://groups.google.com/group/microdia/web/testing-microdia-driver-draft

and compiled it sucessfully.

[43593168.980000] usbcore: registered new interface driver sn9c20x
[43593168.990000] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01
loaded
[43593181.290000] usb 3-1: USB disconnect, address 7
[43593184.040000] usb 3-1: new full speed USB device using ohci_hcd
and address 8
[43593184.230000] usb 3-1: configuration #1 chosen from 1 choice
[43593184.240000] usb 3-1: New USB device found, idVendor=0c45,
idProduct=6142
[43593184.250000] usb 3-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[43593184.260000] usb 3-1: Product: USB camera


But it still don't work, i think ID 6142 is not known. What can I do ?

Thanks

Dietmar

[Vasily Khoruzhick]

Hi, your cam is not sn9c20x-based (it's sn9c1xx-based), so sn9c20x driver
doesn't support it.

Regards
Vasily

[Cerus]

Thanks Vasily,

it still don't work for me on the NSLU with ARM Processor,
I think i change to a network cam.

On Jan 12, 8:37 am, Vasily Khoruzhick <anars...@gmail.com> wrote:
> On 11 January 2009 17:42:35 Cerus wrote:
>
>
>
> > Hi,
>
> > i need help with a new Hama PC-Webcam AC-150.
>
> > dmesg:
>
> > New USB device found, idVendor=0c45, idProduct=6142
> > New USB device strings: Mfr=0, Product=1, SerialNumber=0
> > Product: USB camera
>
> > lsusb:
>
> > ID 0c45:6142 Microdia
>
> > I use Nslu with Debian Kernel 2.6.26-1-ixp4xx
>
> > I found

> >http://groups.google.com/group/microdia/web/testing-microdia-driver-d...

>
> > and compiled it sucessfully.
>
> > [43593168.980000] usbcore: registered new interface driver sn9c20x
> > [43593168.990000] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01
> > loaded
> > [43593181.290000] usb 3-1: USB disconnect, address 7
> > [43593184.040000] usb 3-1: new full speed USB device using ohci_hcd
> > and address 8
> > [43593184.230000] usb 3-1: configuration #1 chosen from 1 choice
> > [43593184.240000] usb 3-1: New USB device found, idVendor=0c45,
> > idProduct=6142
> > [43593184.250000] usb 3-1: New USB device strings: Mfr=0, Product=1,
> > SerialNumber=0
> > [43593184.260000] usb 3-1: Product: USB camera
>
> > But it still don't work, i think ID 6142 is not known. What can I do ?
>
> > Thanks
>
> > Dietmar
>
> Hi, your cam is not sn9c20x-based (it's sn9c1xx-based), so sn9c20x driver
> doesn't support it.
>
> Regards
> Vasily
>

>  signature.asc
> < 1KViewDownload