Modular Model Rocket Ğ 
http://www.thingiverse.com/thing:8754

1.75inx24MM_Standard_Fincan.STL
http://www.thingiverse.com/download:29793

With pypy:

[09:09:48] Beginning toolpath generation.
[09:09:48] printomatic 5D sf 50
[09:09:50] OVERRIDE raft.csv Add Raft, Elevate Nozzle, Orbit: true
[09:09:50] {'Add Raft, Elevate Nozzle, Orbit:': 'true'}
[09:09:50] OVERRIDE raft.csv None true
[09:09:50] {'Add Raft, Elevate Nozzle, Orbit:': 'true', 'None': 'true'}
[09:09:50] OVERRIDE raft.csv Empty Layers Only false
[09:09:50] {'Add Raft, Elevate Nozzle, Orbit:': 'true', 'Empty Layers Only': 'false', 'None': 'true'}
[09:09:50] OVERRIDE raft.csv Everywhere false
[09:09:50] {'Everywhere': 'false', 'Add Raft, Elevate Nozzle, Orbit:': 'true', 'Empty Layers Only': 'false', 'None': 'true'}
[09:09:50] OVERRIDE raft.csv Exterior Only false
[09:09:50] {'Everywhere': 'false', 'Add Raft, Elevate Nozzle, Orbit:': 'true', 'Empty Layers Only': 'false', 'None': 'true', 'Exterior Only': 'false'}
[09:09:50] OVERRIDE alteration.csv Name of Start File: 
[09:09:50] {'Name of Start File:': ''}
[09:09:50] OVERRIDE alteration.csv Name of End File: 
[09:09:50] {'Name of End File:': '', 'Name of Start File:': ''}
[09:09:50] OVERRIDE fill.csv Infill Solidity (ratio): 0.1
[09:09:50] {'Infill Solidity (ratio):': '0.1'}
[09:09:50] OVERRIDE speed.csv Feed Rate (mm/s): 80.0
[09:09:50] {'Feed Rate (mm/s):': '80.0'}
[09:09:50] OVERRIDE speed.csv Travel Feed Rate (mm/s): 150.0
[09:09:50] {'Travel Feed Rate (mm/s):': '150.0', 'Feed Rate (mm/s):': '80.0'}
[09:09:50] OVERRIDE speed.csv Flow Rate Setting (float): 80.0
[09:09:50] {'Flow Rate Setting (float):': '80.0', 'Travel Feed Rate (mm/s):': '150.0', 'Feed Rate (mm/s):': '80.0'}
[09:09:50] OVERRIDE dimension.csv Filament Diameter (mm): 1.82
[09:09:50] {'Filament Diameter (mm):': '1.82'}
[09:09:50] OVERRIDE carve.csv Edge Width over Height (ratio): 2.0
[09:09:50] {'Edge Width over Height (ratio):': '2.0'}
[09:09:50] OVERRIDE inset.csv Infill Width over Thickness (ratio): 2.0
[09:09:50] {'Infill Width over Thickness (ratio):': '2.0'}
[09:09:50] OVERRIDE carve.csv Layer Height (mm): 0.2
[09:09:50] {'Layer Height (mm):': '0.2', 'Edge Width over Height (ratio):': '2.0'}
[09:09:50] OVERRIDE fill.csv Extra Shells on Alternating Solid Layer (layers): 2.0
[09:09:50] {'Extra Shells on Alternating Solid Layer (layers):': '2.0', 'Infill Solidity (ratio):': '0.1'}
[09:09:50] OVERRIDE fill.csv Extra Shells on Base (layers): 2.0
[09:09:50] {'Extra Shells on Base (layers):': '2.0', 'Extra Shells on Alternating Solid Layer (layers):': '2.0', 'Infill Solidity (ratio):': '0.1'}
[09:09:50] OVERRIDE fill.csv Extra Shells on Sparse Layer (layers): 2.0
[09:09:50] {'Extra Shells on Base (layers):': '2.0', 'Extra Shells on Alternating Solid Layer (layers):': '2.0', 'Extra Shells on Sparse Layer (layers):': '2.0', 'Infill Solidity (ratio):': '0.1'}
[09:09:50] File /Users/svanvliet/Downloads/1.75inx24mm_Standard_Fincan.STL is being chain exported.
[09:10:35] Carve procedure took 46 seconds.
[09:10:40] Preface procedure took 5 seconds.
[09:11:25] Inset procedure took 44 seconds.
[09:12:29] Fill procedure took 1 minute 5 seconds.
[09:12:35] Speed procedure took 5 seconds.
[09:12:47] Raft procedure took 12 seconds.
[09:12:54] Jitter procedure took 7 seconds.
[09:13:04] Comb procedure took 10 seconds.
[09:13:16] Cool procedure took 12 seconds.
[09:13:24] Dimension procedure took 9 seconds.
[09:13:42] Alteration procedure took 18 seconds.
[09:13:57] The exported file is saved as /Users/svanvliet/Downloads/1.75inx24mm_Standard_Fincan.gcode
[09:13:57] It took 4 minutes 7 seconds to export the file.

Without pypy:

[09:20:23] Beginning toolpath generation.
[09:20:23] printomatic 5D sf 50
[09:20:23] OVERRIDE raft.csv Add Raft, Elevate Nozzle, Orbit: true
[09:20:23] {'Add Raft, Elevate Nozzle, Orbit:': 'true'}
[09:20:23] OVERRIDE raft.csv None true
[09:20:23] {'Add Raft, Elevate Nozzle, Orbit:': 'true', 'None': 'true'}
[09:20:23] OVERRIDE raft.csv Empty Layers Only false
[09:20:23] {'Add Raft, Elevate Nozzle, Orbit:': 'true', 'Empty Layers Only': 'false', 'None': 'true'}
[09:20:23] OVERRIDE raft.csv Everywhere false
[09:20:23] {'Everywhere': 'false', 'Add Raft, Elevate Nozzle, Orbit:': 'true', 'Empty Layers Only': 'false', 'None': 'true'}
[09:20:23] OVERRIDE raft.csv Exterior Only false
[09:20:23] {'Everywhere': 'false', 'Add Raft, Elevate Nozzle, Orbit:': 'true', 'Empty Layers Only': 'false', 'None': 'true', 'Exterior Only': 'false'}
[09:20:23] OVERRIDE alteration.csv Name of Start File: 
[09:20:23] {'Name of Start File:': ''}
[09:20:23] OVERRIDE alteration.csv Name of End File: 
[09:20:23] {'Name of End File:': '', 'Name of Start File:': ''}
[09:20:23] OVERRIDE fill.csv Infill Solidity (ratio): 0.1
[09:20:23] {'Infill Solidity (ratio):': '0.1'}
[09:20:23] OVERRIDE speed.csv Feed Rate (mm/s): 80.0
[09:20:23] {'Feed Rate (mm/s):': '80.0'}
[09:20:23] OVERRIDE speed.csv Travel Feed Rate (mm/s): 150.0
[09:20:23] {'Travel Feed Rate (mm/s):': '150.0', 'Feed Rate (mm/s):': '80.0'}
[09:20:23] OVERRIDE speed.csv Flow Rate Setting (float): 80.0
[09:20:23] {'Flow Rate Setting (float):': '80.0', 'Travel Feed Rate (mm/s):': '150.0', 'Feed Rate (mm/s):': '80.0'}
[09:20:23] OVERRIDE dimension.csv Filament Diameter (mm): 1.82
[09:20:23] {'Filament Diameter (mm):': '1.82'}
[09:20:23] OVERRIDE carve.csv Edge Width over Height (ratio): 2.0
[09:20:23] {'Edge Width over Height (ratio):': '2.0'}
[09:20:23] OVERRIDE inset.csv Infill Width over Thickness (ratio): 2.0
[09:20:23] {'Infill Width over Thickness (ratio):': '2.0'}
[09:20:23] OVERRIDE carve.csv Layer Height (mm): 0.2
[09:20:23] {'Layer Height (mm):': '0.2', 'Edge Width over Height (ratio):': '2.0'}
[09:20:23] OVERRIDE fill.csv Extra Shells on Alternating Solid Layer (layers): 2.0
[09:20:23] {'Extra Shells on Alternating Solid Layer (layers):': '2.0', 'Infill Solidity (ratio):': '0.1'}
[09:20:23] OVERRIDE fill.csv Extra Shells on Base (layers): 2.0
[09:20:23] {'Extra Shells on Base (layers):': '2.0', 'Extra Shells on Alternating Solid Layer (layers):': '2.0', 'Infill Solidity (ratio):': '0.1'}
[09:20:23] OVERRIDE fill.csv Extra Shells on Sparse Layer (layers): 2.0
[09:20:23] {'Extra Shells on Base (layers):': '2.0', 'Extra Shells on Alternating Solid Layer (layers):': '2.0', 'Extra Shells on Sparse Layer (layers):': '2.0', 'Infill Solidity (ratio):': '0.1'}
[09:20:23] File /Users/svanvliet/Downloads/1.75inx24mm_Standard_Fincan.STL is being chain exported.
[09:39:50] Carve procedure took 19 minutes 27 seconds.
[09:39:59] Preface procedure took 9 seconds.
[09:47:34] Inset procedure took 7 minutes 35 seconds.
[09:55:29] Fill procedure took 7 minutes 55 seconds.
[09:55:35] Speed procedure took 6 seconds.
[09:55:59] Raft procedure took 25 seconds.
[09:56:13] Jitter procedure took 14 seconds.
[09:57:05] Comb procedure took 52 seconds.
[09:57:40] Cool procedure took 35 seconds.
[09:58:02] Dimension procedure took 22 seconds.
[09:58:07] Alteration procedure took 5 seconds.
[09:58:23] The exported file is saved as /Users/svanvliet/Downloads/1.75inx24mm_Standard_Fincan.gcode
[09:58:23] It took 37 minutes 59 seconds to export the file.