From: Pete Zaitcev This patch fixes a few problems with ub and cleans up a couple of things: - Bump UB_MAX_REQ_SG, this allows to burn CDs - Drop initialization of urb.transfer_flags, now that URB_UNLINK_ASYNC is gone - Add forgotten processing of stalls at GetMaxLUN - Remove a few more P3-tagged printks whose time has come - Correct comment about ZIP-100 Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman drivers/block/ub.c | 53 +++++++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 26 deletions(-) --- scsi-2.6.orig/drivers/block/ub.c 2005-09-20 05:59:42.000000000 -0700 +++ scsi-2.6/drivers/block/ub.c 2005-09-21 17:29:36.000000000 -0700 @@ -172,7 +172,7 @@ */ struct ub_dev; -#define UB_MAX_REQ_SG 4 +#define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */ #define UB_MAX_SECTORS 64 /* @@ -387,7 +387,7 @@ struct bulk_cs_wrap work_bcs; struct usb_ctrlrequest work_cr; - int sg_stat[UB_MAX_REQ_SG+1]; + int sg_stat[6]; struct ub_scsi_trace tr; }; @@ -525,12 +525,13 @@ "qlen %d qmax %d\n", sc->cmd_queue.qlen, sc->cmd_queue.qmax); cnt += sprintf(page + cnt, - "sg %d %d %d %d %d\n", + "sg %d %d %d %d %d .. %d\n", sc->sg_stat[0], sc->sg_stat[1], sc->sg_stat[2], sc->sg_stat[3], - sc->sg_stat[4]); + sc->sg_stat[4], + sc->sg_stat[5]); list_for_each (p, &sc->luns) { lun = list_entry(p, struct ub_lun, link); @@ -835,7 +836,7 @@ return -1; } cmd->nsg = n_elem; - sc->sg_stat[n_elem]++; + sc->sg_stat[n_elem < 5 ? n_elem : 5]++; /* * build the command @@ -891,7 +892,7 @@ return -1; } cmd->nsg = n_elem; - sc->sg_stat[n_elem]++; + sc->sg_stat[n_elem < 5 ? n_elem : 5]++; memcpy(&cmd->cdb, rq->cmd, rq->cmd_len); cmd->cdb_len = rq->cmd_len; @@ -1010,7 +1011,6 @@ sc->last_pipe = sc->send_bulk_pipe; usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe, bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc); - sc->work_urb.transfer_flags = 0; /* Fill what we shouldn't be filling, because usb-storage did so. */ sc->work_urb.actual_length = 0; @@ -1019,7 +1019,6 @@ if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { /* XXX Clear stalls */ - printk("ub: cmd #%d start failed (%d)\n", cmd->tag, rc); /* P3 */ ub_complete(&sc->work_done); return rc; } @@ -1190,11 +1189,9 @@ return; } if (urb->status != 0) { - printk("ub: cmd #%d cmd status (%d)\n", cmd->tag, urb->status); /* P3 */ goto Bad_End; } if (urb->actual_length != US_BULK_CB_WRAP_LEN) { - printk("ub: cmd #%d xferred %d\n", cmd->tag, urb->actual_length); /* P3 */ /* XXX Must do reset here to unconfuse the device */ goto Bad_End; } @@ -1395,14 +1392,12 @@ usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe, page_address(sg->page) + sg->offset, sg->length, ub_urb_complete, sc); - sc->work_urb.transfer_flags = 0; sc->work_urb.actual_length = 0; sc->work_urb.error_count = 0; sc->work_urb.status = 0; if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { /* XXX Clear stalls */ - printk("ub: data #%d submit failed (%d)\n", cmd->tag, rc); /* P3 */ ub_complete(&sc->work_done); ub_state_done(sc, cmd, rc); return; @@ -1442,7 +1437,6 @@ sc->last_pipe = sc->recv_bulk_pipe; usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe, &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc); - sc->work_urb.transfer_flags = 0; sc->work_urb.actual_length = 0; sc->work_urb.error_count = 0; sc->work_urb.status = 0; @@ -1563,7 +1557,6 @@ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe, (unsigned char*) cr, NULL, 0, ub_urb_complete, sc); - sc->work_urb.transfer_flags = 0; sc->work_urb.actual_length = 0; sc->work_urb.error_count = 0; sc->work_urb.status = 0; @@ -2000,17 +1993,16 @@ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe, (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl); - sc->work_urb.transfer_flags = 0; sc->work_urb.actual_length = 0; sc->work_urb.error_count = 0; sc->work_urb.status = 0; if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) { if (rc == -EPIPE) { - printk("%s: Stall at GetMaxLUN, using 1 LUN\n", + printk("%s: Stall submitting GetMaxLUN, using 1 LUN\n", sc->name); /* P3 */ } else { - printk(KERN_WARNING + printk(KERN_NOTICE "%s: Unable to submit GetMaxLUN (%d)\n", sc->name, rc); } @@ -2028,6 +2020,18 @@ del_timer_sync(&timer); usb_kill_urb(&sc->work_urb); + if ((rc = sc->work_urb.status) < 0) { + if (rc == -EPIPE) { + printk("%s: Stall at GetMaxLUN, using 1 LUN\n", + sc->name); /* P3 */ + } else { + printk(KERN_NOTICE + "%s: Error at GetMaxLUN (%d)\n", + sc->name, rc); + } + goto err_io; + } + if (sc->work_urb.actual_length != 1) { printk("%s: GetMaxLUN returned %d bytes\n", sc->name, sc->work_urb.actual_length); /* P3 */ @@ -2048,6 +2052,7 @@ kfree(p); return nluns; +err_io: err_submit: kfree(p); err_alloc: @@ -2080,7 +2085,6 @@ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe, (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl); - sc->work_urb.transfer_flags = 0; sc->work_urb.actual_length = 0; sc->work_urb.error_count = 0; sc->work_urb.status = 0; @@ -2241,10 +2245,10 @@ for (i = 0; i < 3; i++) { if ((rc = ub_sync_getmaxlun(sc)) < 0) { /* - * Some devices (i.e. Iomega Zip100) need this -- - * apparently the bulk pipes get STALLed when the - * GetMaxLUN request is processed. - * XXX I have a ZIP-100, verify it does this. + * This segment is taken from usb-storage. They say + * that ZIP-100 needs this, but my own ZIP-100 works + * fine without this. + * Still, it does not seem to hurt anything. */ if (rc == -EPIPE) { ub_probe_clear_stall(sc, sc->recv_bulk_pipe); @@ -2313,7 +2317,7 @@ disk->first_minor = lun->id * UB_MINORS_PER_MAJOR; disk->fops = &ub_bd_fops; disk->private_data = lun; - disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */ + disk->driverfs_dev = &sc->intf->dev; rc = -ENOMEM; if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL) @@ -2466,9 +2470,6 @@ { int rc; - /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n", - sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun)); - if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0) goto err_regblkdev; devfs_mk_dir(DEVFS_NAME); -- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/