Bootdata ok (command line is root=/dev/sdb3 vga=792 console=ttyS0,57600 console=tty0 debug) Linux version 2.6.13-rc1-mm1 (rafael@chimera) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Fri Jul 1 23:47:55 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f66f0 ACPI: RSDT (v001 A M I OEMRSDT 0x10000302 MSFT 0x00000097) @ 0x000000003fff0000 ACPI: FADT (v001 A M I OEMFACP 0x10000302 MSFT 0x00000097) @ 0x000000003fff0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000302 MSFT 0x00000097) @ 0x000000003fff0380 ACPI: OEMB (v001 A M I OEMBIOS 0x10000302 MSFT 0x00000097) @ 0x000000003ffff040 ACPI: SRAT (v001 A M I OEMSRAT 0x10000302 MSFT 0x00000097) @ 0x000000003fff39f0 ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000003fff3ae0 ACPI: DSDT (v001 0ABCF 0ABCF007 0x00000007 INTL 0x02002026) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 2 Node 0 MemBase 0000000000000000 Limit 000000001fffffff Node 1 MemBase 0000000020000000 Limit 000000003fff0000 Using node hash shift of 24 Bootmem setup node 0 0000000000000000-000000001fffffff Bootmem setup node 1 0000000020000000-000000003fff0000 On node 0 totalpages: 131071 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126975 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 On node 1 totalpages: 131056 DMA zone: 0 pages, LIFO batch:1 Normal zone: 131056 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x5008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfc9fe000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 17, address 0xfc9fe000, GSI 24-27 ACPI: IOAPIC (id[0x04] address[0xfc9ff000] gsi_base[28]) IOAPIC[2]: apic_id 4, version 17, address 0xfc9ff000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:bf7c0000) Checking aperture... CPU 0: aperture @ f0000000 size 128 MB CPU 1: aperture @ f0000000 size 128 MB Built 2 zonelists Initializing CPU#0 Kernel command line: root=/dev/sdb3 vga=792 console=ttyS0,57600 console=tty0 debug PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 1388.419 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1025700k/1048512k available (2766k kernel code, 0k reserved, 1336k data, 228k init) Calibrating delay using timer specific routine.. 2782.49 BogoMIPS (lpj=5564983) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) mtrr: v2.0 (20020519) tbxface-0120 [02] acpi_load_tables : ACPI Tables successfully acquired dswload-0498: *** Warning: Encountered executable code at module level, [If] dswload-0498: *** Warning: Encountered executable code at module level, [If] Parsing all Control Methods:.................................................................................................................. Table [DSDT](id F004) - 519 Objects with 45 Devices 144 Methods 13 Regions ACPI Namespace successfully loaded at root ffffffff8052f940 evxfevnt-0096 [03] acpi_enable : Transition to ACPI mode successful Using local APIC timer interrupts. Detected 12.396 MHz APIC timer. softlockup thread 0 started up. Booting processor 1/1 rip 6000 rsp ffff810001763f58 Initializing CPU#1 Calibrating delay using timer specific routine.. 2777.00 BogoMIPS (lpj=5554000) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) AMD Opteron(tm) Processor 240 stepping 01 CPU 1: Syncing TSC to CPU 0. Brought up 2 CPUs softlockup thread 1 started up. Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. testing NMI watchdog ... CPU#1: NMI appears to be stuck (1->1)! CPU 1: synchronized TSC with CPU 0 (last diff -3 cycles, maxerr 930 cycles) -> [0][1][ 65536] 0.0 [ 0.0] (0): ( 82827 41413) -> [0][1][ 68985] 0.0 [ 0.0] (0): ( 27161 48539) -> [0][1][ 72615] 0.0 [ 0.0] (0): ( 28702 25040) -> [0][1][ 76436] 0.0 [ 0.0] (0): ( 29921 13129) -> [0][1][ 80458] 0.0 [ 0.0] (0): ( 31519 7363) -> [0][1][ 84692] 0.0 [ 0.0] (0): ( 32581 4212) -> [0][1][ 89149] 0.0 [ 0.0] (0): ( 32836 2233) -> found max. [0][1] working set size found: 65536, cost: 82827 --------------------- | migration cost matrix (max_cache_size: 0, cpu: 1388 MHz): --------------------- [00] [01] [00]: - 0.1(0) [01]: 0.1(0) - -------------------------------- | cacheflush times [1]: 0.1 (165654) | calibration delay: 0 seconds -------------------------------- NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 evgpeblk-1016 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-1024 [06] ev_create_gpe_block : Found 5 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1016 [06] ev_create_gpe_block : GPE 10 to 2F [_GPE] 4 regs on int 0x9 evgpeblk-1024 [06] ev_create_gpe_block : Found 1 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:........................................................................................ Initialized 12/13 Regions 68/68 Fields 39/39 Buffers 18/18 Packages (528 nodes) Executing all Device _STA and_INI methods:................................................. 49 Devices found containing: 49 _STA, 0 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 ACPI: Assume root bridge [\_SB_.PCIB] segment is 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] ACPI: PCI Root Bridge [PCIB] (0000:04) PCI: Probing PCI hardware (bus 04) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 ACPI: Assume root bridge [\_SB_.PCIB] segment is 0 Boot video device is 0000:05:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.PBP2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AMD 8151 AGP Bridge rev B2 agpgart: AGP aperture is 128M @ 0xf0000000 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1120255509.632:1): initialized Total HugeTLB memory allocated, 0 inotify device minor=63 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000100000, using 6144k, total 131072k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1]) Real Time Clock Driver v1.12 hw_random: AMD768 system management I/O registers at 0x5000. hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 cn_fork is registered cn_exit is registered serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered loop: loaded (max 8 devices) tg3.c:v3.32 (June 24, 2005) acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 16 eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:27:a0:bf eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[763f0000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HDS722580VLAT20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: LITE-ON DVDRW LDW-851S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 26 (level, low) -> IRQ 17 sym0: <1010-66> rev 0x1 at pci 0000:02:07.0 irq 17 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: SCSI BUS has been reset. scsi0 : sym-2.2.1 target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) Vendor: IBM Model: DDYS-T36950N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 Losing some ticks... checking if CPU frequency changed. target0:0:0: tagged command queuing enabled, command queue depth 16. target0:0:0: Beginning Domain Validation target0:0:0: asynchronous. target0:0:0: wide asynchronous. target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62) target0:0:0: Ending Domain Validation 3ware Storage Controller device driver for Linux v1.26.02.001. ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 27 (level, low) -> IRQ 18 scsi1 : 3ware Storage Controller 3w-xxxx: scsi1: Found a 3ware Storage Controller at 0x8c00, IRQ: 18. Vendor: Model: Rev: Type: Direct-Access ANSI SCSI revision: 00 libata version 1.11 loaded. sata_sil version 0.9 ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 17 (level, low) -> IRQ 19 ata1: SATA max UDMA/100 cmd 0xFFFFC20000006C80 ctl 0xFFFFC20000006C8A bmdma 0xFFFFC20000006C00 irq 19 ata2: SATA max UDMA/100 cmd 0xFFFFC20000006CC0 ctl 0xFFFFC20000006CCA bmdma 0xFFFFC20000006C08 irq 19 ata3: SATA max UDMA/100 cmd 0xFFFFC20000006E80 ctl 0xFFFFC20000006E8A bmdma 0xFFFFC20000006E00 irq 19 ata4: SATA max UDMA/100 cmd 0xFFFFC20000006EC0 ctl 0xFFFFC20000006ECA bmdma 0xFFFFC20000006E08 irq 19 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c68 86:3c01 87:4003 88:20ff ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi2 : sata_sil ata2: no device found (phy stat 00000000) scsi3 : sata_sil ata3: no device found (phy stat 00000000) scsi4 : sata_sil ata4: no device found (phy stat 00000000) scsi5 : sata_sil Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sdb : sector size 0 reported, assuming 512. SCSI device sdb: 1 512-byte hdwr sectors (0 MB) sdb: asking for cache data failed sdb: assuming drive cache: write through sdb : sector size 0 reported, assuming 512. SCSI device sdb: 1 512-byte hdwr sectors (0 MB) sdb: asking for cache data failed sdb: assuming drive cache: write through sdb: sdb1 sdb2 sdb3 sdb4 < > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 mice: PS/2 mouse device common for all mice md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 4094.000 MB/sec raid5: using function: generic_sse (4094.000 MB/sec) md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered ip_conntrack version 2.1 (4095 buckets, 32760 max) - 336 bytes per conntrack logips2pp: Detected unknown logitech mouse model 57 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 TCP bic registered TCP westwood registered TCP htcp registered NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ReiserFS: sdb3: warning: sh-2006: read_super_block: bread failed (dev sdb3, block 16, size 512) ReiserFS: sdb3: warning: sh-2006: read_super_block: bread failed (dev sdb3, block 128, size 512) EXT3-fs: unable to read superblock EXT2-fs: unable to read superblock Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,19)