BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28-fw1 (fst@i686.frugalware.org) (gcc version 4.3.2 (Frugalware Linux) ) #1 SMP PREEMPT Mon Jan 19 00:36:37 CET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data) BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.2 present. last_pfn = 0x1dff0 max_arch_pfn = 0x100000 Scanning 2 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 0000000000007000 (usable) modified: 0000000000007000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000092c00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000001dff0000 (usable) modified: 000000001dff0000 - 000000001dffffc0 (ACPI data) modified: 000000001dffffc0 - 000000001e000000 (ACPI NVS) modified: 00000000fffc0000 - 0000000100000000 (reserved) kernel direct mapping tables up to 1dff0000 @ 10000-16000 ACPI: RSDP 000E4010, 0014 (r0 OID_00) ACPI: RSDT 1DFFFBD0, 002C (r1 OID_00 RSDT_000 30303030 _CSI 10101) ACPI: FACP 1DFFFB20, 0074 (r1 INSYDE FACP_000 100 _CSI 10101) ACPI: DSDT 1DFFAB20, 4FFE (r1 INSYDE KENORAA3 1004 MSFT 2000001) ACPI: FACS 1DFFFFC0, 0040 ACPI: BOOT 1DFFFBA0, 0026 (r1 INSYDE SYS_BOOT 100 _CSI 10101) 0MB HIGHMEM available. 479MB LOWMEM available. mapped low ram: 0 - 1dff0000 low ram: 00000000 - 1dff0000 bootmap 00012000 - 00015c00 (8 early reservations) ==> bootmem [0000000000 - 001dff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00006c1a90] TEXT DATA BSS ==> [0000100000 - 00006c1a90] #4 [00006c2000 - 00006c5000] INIT_PG_TABLE ==> [00006c2000 - 00006c5000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001dff0 HighMem 0x0001dff0 -> 0x0001dff0 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x00000007 0: 0x00000010 -> 0x00000092 0: 0x00000100 -> 0x0001dff0 On node 0 totalpages: 122741 free_area_init_node: node 0, pgdat c05aa880, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3941 pages, LIFO batch:0 Normal zone: 928 pages used for memmap Normal zone: 117840 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 0000000000007000 - 0000000000010000 PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 1e000000:e1fc0000) PERCPU: Allocating 45056 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121781 Kernel command line: root=/dev/sda1 ro quiet vga=791 resume=/dev/sda2 nohz=off Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 2048 (order: 11, 8192 bytes) TSC: PIT calibration deviates from PMTIMER: 1309343 1499790. TSC: Using PIT calibration value Detected 1309.343 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Scanning for low memory corruption every 60 seconds Memory: 480600k/491456k available (3320k kernel code, 10244k reserved, 1614k data, 432k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffee5000 - 0xfffff000 (1128 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xde7f0000 - 0xff7fe000 ( 528 MB) lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) .init : 0xc05d8000 - 0xc0644000 ( 432 kB) .data : 0xc043e04d - 0xc05d19c8 (1614 kB) .text : 0xc0100000 - 0xc043e04d (3320 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 2618.68 BogoMIPS (lpj=1309343) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 15k freed ACPI: Core revision 20080926 ACPI: setting ELCR to 0200 (from 0c00) weird, boot CPU (#0) not listedby the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (2618.68 BogoMIPS). net_namespace: 772 bytes Booting paravirtualized kernel on bare hardware xor: automatically using best checksumming function: pIII_sse pIII_sse : 3372.000 MB/sec xor: using function: pIII_sse (3372.000 MB/sec) regulator: core version 0.5 NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xa0000000-0xa7ffffff] pci 0000:00:02.0: reg 14 32bit mmio: [0xf0000000-0xf007ffff] pci 0000:00:02.0: reg 18 io port: [0xe000-0xe007] pci 0000:00:02.0: supports D1 pci 0000:00:02.1: reg 10 32bit mmio: [0xa8000000-0xafffffff] pci 0000:00:02.1: reg 14 32bit mmio: [0xf0100000-0xf017ffff] pci 0000:00:02.1: supports D1 pci 0000:00:1d.0: reg 20 io port: [0xe120-0xe13f] pci 0000:00:1d.1: reg 20 io port: [0xe240-0xe25f] pci 0000:00:1d.2: reg 20 io port: [0xe360-0xe37f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0080000-0xf00803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.5: reg 10 io port: [0xe600-0xe6ff] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe83f] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0180000-0xf01801ff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0180200-0xf01802ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10 io port: [0xea00-0xeaff] pci 0000:00:1f.6: reg 14 io port: [0xec00-0xec7f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:00.0: reg 10 io port: [0xc200-0xc2ff] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0008000-0xe00080ff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:02.0: reg 10 32bit mmio: [0xe0001000-0xe00017ff] pci 0000:01:02.0: reg 14 32bit mmio: [0xe0004000-0xe0007fff] pci 0000:01:02.0: supports D1 D2 pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:02.0: PME# disabled pci 0000:01:03.0: reg 10 32bit mmio: [0xe0000000-0xe0000fff] pci 0000:01:03.0: PME# supported from D0 D3hot D3cold pci 0000:01:03.0: PME# disabled pci 0000:01:09.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:01:09.0: supports D1 D2 pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:09.0: PME# disabled pci 0000:01:09.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:01:09.1: supports D1 D2 pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot pci 0000:01:09.1: PME# disabled pci 0000:01:09.2: reg 10 io port: [0xc000-0xc03f] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xefffffff] pci 0000:00:1e.0: bridge 32bit mmio pref: [0x90000000-0x9fffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved system 00:07: ioport range 0x120-0x12f has been reserved system 00:07: ioport range 0x1000-0x107f has been reserved system 00:07: ioport range 0x1300-0x133f has been reserved system 00:07: ioport range 0x1400-0x141f has been reserved PM-Timer running at invalid rate: 87% of normal - aborting. pci 0000:01:09.0: CardBus bridge, secondary bus 0000:02 pci 0000:01:09.0: IO window: 0x00c400-0x00c4ff pci 0000:01:09.0: IO window: 0x00c800-0x00c8ff pci 0000:01:09.0: PREFETCH window: 0x90000000-0x93ffffff pci 0000:01:09.0: MEM window: 0xe4000000-0xe7ffffff pci 0000:01:09.1: CardBus bridge, secondary bus 0000:06 pci 0000:01:09.1: IO window: 0x00cc00-0x00ccff pci 0000:01:09.1: IO window: 0x00d000-0x00d0ff pci 0000:01:09.1: PREFETCH window: 0x94000000-0x97ffffff pci 0000:01:09.1: MEM window: 0xe8000000-0xebffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0xc000-0xdfff pci 0000:00:1e.0: MEM window: 0xe0000000-0xefffffff pci 0000:00:1e.0: PREFETCH window: 0x00000090000000-0x0000009fffffff pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pci 0000:01:09.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:01:09.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 io port: [0xc000-0xdfff] bus: 01 index 1 mmio: [0xe0000000-0xefffffff] bus: 01 index 2 mmio: [0x90000000-0x9fffffff] bus: 01 index 3 io port: [0x00-0xffff] bus: 01 index 4 mmio: [0x000000-0xffffffff] bus: 02 index 0 io port: [0xc400-0xc4ff] bus: 02 index 1 io port: [0xc800-0xc8ff] bus: 02 index 2 mmio: [0x90000000-0x93ffffff] bus: 02 index 3 mmio: [0xe4000000-0xe7ffffff] bus: 06 index 0 io port: [0xcc00-0xccff] bus: 06 index 1 io port: [0xd000-0xd0ff] bus: 06 index 2 mmio: [0x94000000-0x97ffffff] bus: 06 index 3 mmio: [0xe8000000-0xebffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x37 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1232552508.258:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 938 alg: No test for stdrng (krng) async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xa0000000, mapped to 0xde880000, using 3072k, total 32576k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 serial 0000:00:1f.6: PCI INT B disabled floppy0: no floppy controllers found brd: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.20) Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 stex: Promise SuperTrak EX Driver version: 3.6.0000.1 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 ata1.00: ATA-8: SAMSUNG HM121HC, LS100-10, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2.00: ATAPI: TSSTcorpCDW/DVD TS-L462A, U301, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM121HC LS10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462A U301 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 5x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 441 MB/s raid6: int32x2 519 MB/s raid6: int32x4 410 MB/s raid6: int32x8 367 MB/s raid6: mmxx1 1250 MB/s raid6: mmxx2 1535 MB/s raid6: sse1x1 972 MB/s raid6: sse1x2 1554 MB/s raid6: sse2x1 1707 MB/s raid6: sse2x2 1953 MB/s raid6: using algorithm sse2x2 (1953 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 EISA: Probing bus 0 at eisa.0 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 17 IO APIC resources could be not be allocated. Using IPI No-Shortcut mode registered taskstats version 1 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Synaptics Touchpad, model: 1, fw: 5.9, id: 0x9d6eb1, caps: 0xa04713/0x4006 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 432k freed kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: AC Adapter [AC] (on-line) ACPI: WMI: Mapper loaded input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button (CM) [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 ACPI: Lid Switch [LID0] ACPI: EC: non-query interrupt received, switching to interrupt mode sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: Battery Slot [BAT0] (battery present) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) input: PC Speaker as /devices/platform/pcspkr/input/input5 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/input/input6 ACPI: Video Device [GRFX] (multi-head: yes rom: yes post: no) uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000e120 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000e240 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e360 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP] ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf0080000 Linux agpgart interface v0.103 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected agpgart-intel 0000:00:00.0: Intel 855GM Chipset agpgart-intel 0000:00:00.0: detected 32636K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xa0000000 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets intelfb: Version 0.9.6 intelfb 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 intelfb: Cannot reserve FB region. iTCO_vendor_support: vendor-support=0 ieee80211_crypt: registered algorithm 'NULL' iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ohci1394 0000:01:02.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 8139too Fast Ethernet driver 0.9.28 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0001000-e00017ff] Max Packet=[2048] IR/IT contexts=[4/8] 8139too 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xc200, 00:90:f5:3d:c5:6f, IRQ 10 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 yenta_cardbus 0000:01:09.0: CardBus bridge found [1558:0350] yenta_cardbus 0000:01:09.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:01:09.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:01:09.0: TI: mfunc 0x01001c00, devctl 0x66 Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH 0000:00:1f.5: setting latency timer to 64 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmq ipw2200: Copyright(c) 2003-2006 Intel Corporation yenta_cardbus 0000:01:09.0: ISA IRQ mask 0x0078, PCI irq 10 yenta_cardbus 0000:01:09.0: Socket status: 30000086 pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 yenta_cardbus 0000:01:09.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: clean. yenta_cardbus 0000:01:09.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff yenta_cardbus 0000:01:09.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff ipw2200 0000:01:03.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200 0000:01:03.0: firmware: requesting ipw2200-bss.fw ppdev: user-space parallel port driver intel8x0_measure_ac97_clock: measured 50322 usecs intel8x0: clocking to 54742 ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) yenta_cardbus 0000:01:09.1: CardBus bridge found [1558:0350] yenta_cardbus 0000:01:09.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:01:09.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:01:09.1: TI: mfunc 0x01001c00, devctl 0x66 udev: renamed network interface eth1 to eth0 udev: renamed network interface eth0_rename to eth1 yenta_cardbus 0000:01:09.1: ISA IRQ mask 0x0078, PCI irq 11 yenta_cardbus 0000:01:09.1: Socket status: 30000006 pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #05 to #09 yenta_cardbus 0000:01:09.1: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc000-0xdfff: clean. yenta_cardbus 0000:01:09.1: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff yenta_cardbus 0000:01:09.1: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f501003dc56f] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. EXT3 FS on sda1, internal journal fuse init (API version 7.10) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k eth1: link down ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (7679 buckets, 30716 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. warning: `pure-ftpd' uses 32-bit capabilities (legacy support in use) Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 on minor 0 eth0: Setting MAC to 00:0e:35:ca:6d:87 ieee80211_crypt: registered algorithm 'CCMP' padlock: VIA PadLock not detected. ieee80211_crypt: registered algorithm 'TKIP' PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk parport_pc 00:0a: disabled eth0: Going into suspend... ipw2200 0000:01:03.0: PCI INT A disabled Intel ICH Modem 0000:00:1f.6: PCI INT B disabled Intel ICH 0000:00:1f.5: PCI INT B disabled ata_piix 0000:00:1f.1: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT D disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled ACPI: Preparing to enter system sleep state S3 Disabling non-boot CPUs ... Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Back to C! ACPI: Waking up from system sleep state S3 pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 pci 0000:00:02.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb1: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb3: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20010100, writing 0x20090100) pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x20000000) ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007) ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 ata_piix 0000:00:1f.1: setting latency timer to 64 Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003) Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH 0000:00:1f.5: setting latency timer to 64 ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out ata2.00: configured for UDMA/33 Clocksource tsc unstable (delta = 500170838 ns) Intel ICH Modem 0000:00:1f.6: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 ACPI: EC: non-query interrupt received, switching to interrupt mode 8139too 0000:01:00.0: restoring config space at offset 0x1 (was 0x82900107, writing 0x2900107) ohci1394 0000:01:02.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b) ohci1394 0000:01:02.0: restoring config space at offset 0x5 (was 0x0, writing 0xe0004000) ohci1394 0000:01:02.0: restoring config space at offset 0x4 (was 0x0, writing 0xe0001000) ohci1394 0000:01:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x8004) ohci1394 0000:01:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0001000-e00017ff] Max Packet=[2048] IR/IT contexts=[4/8] eth0: Coming out of suspend... ipw2200 0000:01:03.0: enabling device (0000 -> 0002) ipw2200 0000:01:03.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 ipw2200 0000:01:03.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010a) ipw2200 0000:01:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xe0000000) ipw2200 0000:01:03.0: restoring config space at offset 0x3 (was 0x0, writing 0x8000) ipw2200 0000:01:03.0: restoring config space at offset 0x1 (was 0x2900002, writing 0x2900116) yenta_cardbus 0000:01:09.0: restoring config space at offset 0xf (was 0x3c001ff, writing 0x5c001ff) yenta_cardbus 0000:01:09.0: restoring config space at offset 0xe (was 0x0, writing 0xc8fc) yenta_cardbus 0000:01:09.0: restoring config space at offset 0xd (was 0x0, writing 0xc800) yenta_cardbus 0000:01:09.0: restoring config space at offset 0xc (was 0x0, writing 0xc4fc) yenta_cardbus 0000:01:09.0: restoring config space at offset 0xb (was 0x0, writing 0xc400) yenta_cardbus 0000:01:09.0: restoring config space at offset 0xa (was 0x0, writing 0xe7fff000) yenta_cardbus 0000:01:09.0: restoring config space at offset 0x9 (was 0x0, writing 0xe4000000) yenta_cardbus 0000:01:09.0: restoring config space at offset 0x8 (was 0x0, writing 0x93fff000) yenta_cardbus 0000:01:09.0: restoring config space at offset 0x7 (was 0x0, writing 0x90000000) yenta_cardbus 0000:01:09.0: restoring config space at offset 0x6 (was 0x20000000, writing 0xb0050201) yenta_cardbus 0000:01:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xe0002000) yenta_cardbus 0000:01:09.0: restoring config space at offset 0x3 (was 0x822000, writing 0x82a820) yenta_cardbus 0000:01:09.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) yenta_cardbus 0000:01:09.1: restoring config space at offset 0xf (was 0x34002ff, writing 0x5c002ff) yenta_cardbus 0000:01:09.1: restoring config space at offset 0xe (was 0x0, writing 0xd0fc) yenta_cardbus 0000:01:09.1: restoring config space at offset 0xd (was 0x0, writing 0xd000) yenta_cardbus 0000:01:09.1: restoring config space at offset 0xc (was 0x0, writing 0xccfc) yenta_cardbus 0000:01:09.1: restoring config space at offset 0xb (was 0x0, writing 0xcc00) yenta_cardbus 0000:01:09.1: restoring config space at offset 0xa (was 0x0, writing 0xebfff000) yenta_cardbus 0000:01:09.1: restoring config space at offset 0x9 (was 0x0, writing 0xe8000000) yenta_cardbus 0000:01:09.1: restoring config space at offset 0x8 (was 0x0, writing 0x97fff000) yenta_cardbus 0000:01:09.1: restoring config space at offset 0x7 (was 0x0, writing 0x94000000) yenta_cardbus 0000:01:09.1: restoring config space at offset 0x6 (was 0x0, writing 0xb0090601) yenta_cardbus 0000:01:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xe0003000) yenta_cardbus 0000:01:09.1: restoring config space at offset 0x3 (was 0x820000, writing 0x82a820) yenta_cardbus 0000:01:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) pci 0000:01:09.2: restoring config space at offset 0x4 (was 0x1, writing 0xc001) pci 0000:01:09.2: restoring config space at offset 0x3 (was 0x0, writing 0x8004) pci 0000:01:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100107) parport_pc 00:0a: activated sd 0:0:0:0: [sda] Starting disk pci 0000:00:02.0: setting latency timer to 64 Restarting tasks ... done. eth0: Setting MAC to 00:0e:35:ca:6d:87