--- u-boot-2023.01+dfsg.orig/include/configs/rpi.h
+++ u-boot-2023.01+dfsg/include/configs/rpi.h
@@ -95,32 +95,32 @@
  *   text_offset bytes (specified in the header of the Image) into a 2MB
  *   boundary. The 'booti' command relocates the image if necessary. Linux uses
  *   a default text_offset of 0x80000.  In summary, loading at 0x80000
- *   satisfies all these constraints and reserving memory up to 0x02400000
- *   permits fairly large (roughly 36M) kernels.
+ *   satisfies all these constraints and reserving memory up to 0x02a00000
+ *   permits fairly large (roughly 42M) kernels.
  *
  * scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't
  * conflict with something else. Reserving 1M for each of them at
- * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty.
+ * 0x02a00000-0x02b00000 and 0x02c00000-0x02d00000 should be plenty.
  *
  * On ARM, both the DTB and any possible initrd must be loaded such that they
  * fit inside the lowmem mapping in Linux. In practice, this usually means not
  * more than ~700M away from the start of the kernel image but this number can
  * be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line
  * parameter given to the kernel. So reserving memory from low to high
- * satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for
- * the DTB leaves rest of the free RAM to the initrd starting at 0x02700000.
+ * satisfies this constraint again. Reserving 1M at 0x02c00000-0x02d00000 for
+ * the DTB leaves rest of the free RAM to the initrd starting at 0x02d00000.
  * Even with the smallest possible CPU-GPU memory split of the CPU getting
- * only 64M, the remaining 25M starting at 0x02700000 should allow quite
+ * only 64M, the remaining 19M starting at 0x02d00000 should allow quite
  * large initrds before they start colliding with U-Boot.
  */
 #define ENV_MEM_LAYOUT_SETTINGS \
 	"fdt_high=" FDT_HIGH "\0" \
 	"initrd_high=" INITRD_HIGH "\0" \
 	"kernel_addr_r=0x00080000\0" \
-	"scriptaddr=0x02400000\0" \
-	"pxefile_addr_r=0x02500000\0" \
-	"fdt_addr_r=0x02600000\0" \
-	"ramdisk_addr_r=0x02700000\0"
+	"scriptaddr=0x02a00000\0" \
+	"pxefile_addr_r=0x02b00000\0" \
+	"fdt_addr_r=0x02c00000\0" \
+	"ramdisk_addr_r=0x02d00000\0"
 
 #if CONFIG_IS_ENABLED(CMD_MMC)
 	#define BOOT_TARGET_MMC(func) \