Filamet™ and The Virtual Foundry

Please delete this post as it is no longer relevant.

I recently purchased a Foredom lathe/buffer. It is the small one that takes 4 inch buffs and is

Hello everyone, I am right now working diligently on a definitive user manual for Filamet™ something

Hello, all this is my new email for monitoring and answering questions for the google group, it was

unfortunately Aluminum has to low a melting temp to work in this application, may be in a different

Chris: did you see my post regarding the need to use a 0.8mm nozzle for the bronze? The geometry of

Excellent work! I have also been producing metal parts for automotive prototypes and I regularly see

So I have a question, might it be possible to combine copper and bronze parts, as might be

In July i ordered a spool of bronze Filanet and it arrived this week. It is labeled as 1kg and on a

I use a Ultimaker 2+ with a bowden tube and the 2.85mm copper filament. I also have problems with

Please respect Jeremiah's request to be addressed properly. I don't think we should call him

Greetings, Jeremiah, Jedidiah, Jeremy, or just J. I appreciate your desire to be addressed by your

I really like your filament. It prints beautifully with essentially zero warp. Where I've

a baked beans can is made from aluminum which would melt way before the copper sintering temp you

Thank you Jeremy ! On Wednesday, September 20, 2017 at 8:45:57 AM UTC+10, jchambe...@go.ccad.edu

Any progress on the videos? Would really like to see the use of a Dremel set. On Tuesday, February 14

Hello boys and girls it is very important to store Filamet™ with desiccant in a seal-able bag of some

Let me look into that not sure we have one, the blend is proprietary so not sure about the wrinkles

Well ya, tin and aluminum have much lower melting temps than just coppers sintering temp you have to

The Filamet is reacting to the atmosphere it has a limited shelf life, the binder itself will break

I've tried to do this for the copper and didn't have any luck-- afterward filament was still

Www.thevirtualfoundry.com/msds On Feb 22, 2017 8:58 PM, "jchambe...@go.ccad.edu" <

Hello, any update as to when this will be sent? Thanks, Mike

Yesterday I printed a large figure, which I designed, I have used a 3D Solex 5 mm ss ice, nozzle. I

Thanks for the fast response! Will definitely do it like that! 2017. március 22., szerda 21:49:39 UTC

I just made my first Filamet Copper print today, printing was good, even excellent, however the print

We've had success with BuildTak-type surface and pallet knives. On Sunday, January 22, 2017 at 10

Hello Thinkertank, First, we'll ship a replacement immediately. This problem is not spread across

My 8-hour completed without any filament breaks...what a relief! Jeremiah, this spool was from the

nope doesn't need to be air tight, yhou can find the proper mixing for MBP right here in this

http://www.thevirtualfoundry.com/help/ all the basic info is right there let me know if this answers