digitalvoice

Hi Alan Cant comment on stations not on FreeDV reporter. LU5DKI, Jose, is s long term operator on

Thanks! Try this once it finishes building: https://github.com/drowe67/freedv-gui/actions/runs/

What are your RX Bandwidth settings? You should be able to about 750hz to 2250hz based on what is

The CI-V address of the IC-7300mk2 is B6h where the original IC-7300 is 94h. I made WSJT-X work by

Hi Mooneer, can confirm,, that with 4e5b the issues are solved. Great job. Thanks, Stefan Am Di., 6.

Had a little battle with Python in the OpenWebRX suite to get USB and LSB working but all good now. -

Hi Axel, Based on what I saw when I put stuff into Google Translate, I think the settings that were

Hi Kanda, Thank you for the video. The CPU usage does seem fairly high here. Would it be possible to

Hi Mooneer, All is good now. I found the target UDP port in the logs and confirmed with Wireshark

Hi Peter, FreeDV includes Hamlib 4.6.5 on Windows and macOS, which is the latest as of this writing.

Many thanks for your reply and helpful advice, Mooneer. This was indeed the solution and I'm now

Incidently, the ICM802 also has a speech compression setting that only be turned off and on with the

Hi Alan, Sorry, I didn't have time to update the PR description this morning. Basically, it sets

BTW to avoid confusion, I added a handler for SIGTERM as well. See https://github.com/drowe67/freedv-

Hi Don, If you go to the network settings on your ezDV, you should see a green box that appears above

Hi Alan, Take a look at https://github.com/drowe67/freedv-gui/actions. This has a list of automated

Hi, Nope. This did not help. A couple of notes: 1) When I set FreeDV to use the same speaker as

Fred, FYI. Looks like an unexpected family event may keep me from being available for the net. Dayne

THANKS Mooneer, That was it. All is behaving as it should now. Cheers Daryl VK3AWA (KO6LQQ) Sent from

Hi Clancy, Unfortunately this is going to require the Hamlib project to add support first, as

Yes, great conditions for long path to VK land. VK2JAS signal peaked to 11dB SNR here and my tower/

WebSDR back online with RADEv1 decode! An Xeon from 2014 in a SFF Dell T1700. Alan VK2ZIW On Mon, Dec

Oops, I missed that part, sorry. Are you able to open up pavucontrol and confirm that FreeDV is using

Hi Mark, I took a look at your screenshots again and I just want to confirm, you're trying to use

Thanks Mooneer! That did the trick, it's running now! Yes, the readme on github at: freedv-gui/

Hi Fred, Due to the WebSDR in Sydney Australia not having enough CPU power to decode RADE, I've

Hi Bob, Do you have any settings enabled on your router to shut down inactive connections? If so, try

Thanks Mooneer all is OK. I hadn't realized this. On Tuesday, December 23, 2025 at 3:56:44 PM UTC

Thank you very much for your work on FreeDV and Merry Christmas! George Migliarini AC6RB

Hi Mike, Theoretically there should be enough CPU available to run two copies of the AppImage (with