Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
ra73 on uda50 for vax750?
2 views
Skip to first unread message
Heinz Wolter
Jul 5, 2001, 6:20:19 PM7/5/01
to
will this work? is the ra73 too new for the
the uda50? or will it make multiple units?
What bootstraps to use on the 750?
the uda50? or will it make multiple units?
What bootstraps to use on the 750?
Thanks in advance.
Heinz Wolter
Doug Carman
Jul 5, 2001, 10:25:23 PM7/5/01
to Heinz Wolter
The RA73 was designed to work with a UDA50. That is the controller that
all UNIBUS VAX and PDP-11 systems used for any directly attached RA
(MSCP) disk that use an SDI interface. I use RA72 disks on my
PDP-11/70. There is only one bootstrap for all MSCP (RA) disks on a
PDP-11. The same one works for any RA60,8x,9x, or 7x. I assume that
the same is true for the VAX-11 systems.
--
Doug Carman
pd...@bellsouth.net
______________________________________________________________________
Posted Via Uncensored-News.Com - Still Only $9.95 - http://www.uncensored-news.com
With Seven Servers In California And Texas - The Worlds Uncensored News Source
Hippo Bob
Jul 14, 2001, 4:53:07 AM7/14/01
to
Works fine. Had some on a 750 a few years ago as a test bed. You use the
same bootrom for all RA series disks. If you can boot an RA8X, you can
boot an RA7X.
same bootrom for all RA series disks. If you can boot an RA8X, you can
boot an RA7X.
pd...@bellsouth.net (Doug Carman) wrote in
<3B452190...@bellsouth.net>:
0 new messages