chandan@chandan-Invalid-entry-length-0-DMI-table-is-broken-Stop:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=f269a8f6-da6f-4535-916f-86f3ecac105f ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da95bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da95c000-0x00000000da9a6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da9a7000-0x00000000da9aefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da9af000-0x00000000dabc0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dabc1000-0x00000000dabc1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dabc2000-0x00000000dabd1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dabd2000-0x00000000dabdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dabe0000-0x00000000dac04fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dac05000-0x00000000dac47fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dac48000-0x00000000dae82fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae83000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: /DH61WW, BIOS BEH6110H.86A.0020.2011.0218.1538 02/18/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 512MB, type WB [ 0.000000] reg 2, base: 3512MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC [ 0.000000] reg 4, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 5, base: 4606MB, range: 2MB, type UC [ 0.000000] total RAM covered: 4022M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3512MB, range: 8MB, type UC [ 0.000000] reg 4, base: 3520MB, range: 64MB, type UC [ 0.000000] reg 5, base: 4GB, range: 512MB, type WB [ 0.000000] reg 6, base: 4606MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fce20-0x000fce2f] mapped at [ffff8800000fce20] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE [ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE [ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xda95bfff] [ 0.000000] [mem 0x40200000-0xda7fffff] page 2M [ 0.000000] [mem 0xda800000-0xda95bfff] page 4k [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdabc1000-0xdabc1fff] [ 0.000000] [mem 0xdabc1000-0xdabc1fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdae83000-0xdaffffff] [ 0.000000] [mem 0xdae83000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x34fc2000-0x367d8fff] [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000da9a7068 0004C (v01 INTEL DH61WW 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000da9ae3a0 000F4 (v04 INTEL DH61WW 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000da9a7140 0725B (v02 INTEL DH61WW 00000012 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dabd7f80 00040 [ 0.000000] ACPI: APIC 00000000da9ae498 00072 (v03 INTEL DH61WW 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000da9ae510 00102 (v01 INTEL DH61WW 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000da9ae618 0003C (v01 INTEL DH61WW 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000da9ae658 00038 (v01 INTEL DH61WW 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xda95bfff] [ 0.000000] node 0: [mem 0xdabc1000-0xdabc1fff] [ 0.000000] node 0: [mem 0xdae83000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1025143 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 157 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13916 pages used for memmap [ 0.000000] DMA32 zone: 890586 pages, LIFO batch:31 [ 0.000000] Normal zone: 2040 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda95c000-0xda9a6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda9a7000-0xda9aefff] [ 0.000000] PM: Registered nosave memory: [mem 0xda9af000-0xdabc0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdabc2000-0xdabd1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdabd2000-0xdabdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdabe0000-0xdac04fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdac05000-0xdac47fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdac48000-0xdae82fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86720 r8192 d23872 u524288 [ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008966 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=f269a8f6-da6f-4535-916f-86f3ecac105f ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3926716K/4100572K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 173856K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2893.712 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.42 BogoMIPS (lpj=11574848) [ 0.000004] pid_max: default: 32768 minimum: 301 [ 0.000022] Security Framework initialized [ 0.000037] AppArmor: AppArmor initialized [ 0.000038] Yama: becoming mindful. [ 0.000263] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001238] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001671] Mount-cache hash table entries: 256 [ 0.001821] Initializing cgroup subsys memory [ 0.001830] Initializing cgroup subsys devices [ 0.001831] Initializing cgroup subsys freezer [ 0.001833] Initializing cgroup subsys blkio [ 0.001834] Initializing cgroup subsys perf_event [ 0.001835] Initializing cgroup subsys hugetlb [ 0.001853] CPU: Physical Processor ID: 0 [ 0.001854] CPU: Processor Core ID: 0 [ 0.001858] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.001858] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.001860] mce: CPU supports 9 MCE banks [ 0.001871] CPU0: Thermal monitoring enabled (TM1) [ 0.001879] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.001879] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.001879] tlb_flushall_shift: 5 [ 0.001973] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000) [ 0.004157] ACPI: Core revision 20130517 [ 0.006196] ACPI: All ACPI Tables successfully acquired [ 0.230347] ftrace: allocating 27796 entries in 109 pages [ 0.242371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.282069] smpboot: CPU0: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz (fam: 06, model: 2a, stepping: 07) [ 0.282076] TSC deadline timer enabled [ 0.282084] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.282090] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.282092] ... version: 3 [ 0.282092] ... bit width: 48 [ 0.282093] ... generic registers: 8 [ 0.282094] ... value mask: 0000ffffffffffff [ 0.282095] ... max period: 0000ffffffffffff [ 0.282096] ... fixed-purpose events: 3 [ 0.282097] ... event mask: 00000007000000ff [ 0.296461] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.283265] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.322808] Brought up 4 CPUs [ 0.322811] smpboot: Total of 4 processors activated (23149.69 BogoMIPS) [ 0.325720] devtmpfs: initialized [ 0.326387] EVM: security.selinux [ 0.326388] EVM: security.SMACK64 [ 0.326389] EVM: security.capability [ 0.326424] PM: Registering ACPI NVS region [mem 0xda95c000-0xda9a6fff] (307200 bytes) [ 0.326429] PM: Registering ACPI NVS region [mem 0xdabd2000-0xdabdffff] (57344 bytes) [ 0.326430] PM: Registering ACPI NVS region [mem 0xdac05000-0xdac47fff] (274432 bytes) [ 0.327083] regulator-dummy: no parameters [ 0.327113] RTC time: 9:57:29, date: 01/16/14 [ 0.327140] NET: Registered protocol family 16 [ 0.327243] ACPI: bus type PCI registered [ 0.327245] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.327284] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.327286] PCI: not using MMCONFIG [ 0.327287] PCI: Using configuration type 1 for base access [ 0.327935] bio: create slab at 0 [ 0.328047] ACPI: Added _OSI(Module Device) [ 0.328049] ACPI: Added _OSI(Processor Device) [ 0.328050] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.328051] ACPI: Added _OSI(Processor Aggregator Device) [ 0.328843] ACPI: EC: Look up EC in DSDT [ 0.329750] ACPI: Executed 1 blocks of module-level executable AML code [ 0.331616] ACPI: SSDT 00000000dabd6c18 0038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.331839] ACPI: Dynamic OEM Table Load: [ 0.331841] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.331858] ACPI: SSDT 00000000dabd7e18 00084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.332042] ACPI: Dynamic OEM Table Load: [ 0.332043] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.332424] ACPI: Interpreter enabled [ 0.332428] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571) [ 0.332431] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571) [ 0.332440] ACPI: (supports S0 S3 S4 S5) [ 0.332441] ACPI: Using IOAPIC for interrupt routing [ 0.332456] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.332499] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.338180] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.338253] ACPI: No dock devices found. [ 0.338407] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.342489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.342591] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.342682] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.342835] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.342913] PCI host bridge to bus 0000:00 [ 0.342915] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.342916] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.342918] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.342919] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] [ 0.342921] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.342922] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.342924] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.342925] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xffffffff] [ 0.342932] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.343000] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000 [ 0.343010] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit] [ 0.343015] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.343019] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.343123] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.343157] pci 0000:00:16.0: reg 0x10: [mem 0xfe428000-0xfe42800f 64bit] [ 0.343271] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.343357] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.343387] pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff] [ 0.343401] pci 0000:00:19.0: reg 0x14: [mem 0xfe427000-0xfe427fff] [ 0.343414] pci 0000:00:19.0: reg 0x18: [io 0xf060-0xf07f] [ 0.343526] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.343570] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.343606] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.343637] pci 0000:00:1a.0: reg 0x10: [mem 0xfe426000-0xfe4263ff] [ 0.343775] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.343818] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.343855] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.343880] pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit] [ 0.344001] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.344072] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.344199] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.344247] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.344294] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.344325] pci 0000:00:1d.0: reg 0x10: [mem 0xfe425000-0xfe4253ff] [ 0.344462] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.344505] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.344537] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100 [ 0.344739] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a [ 0.344766] pci 0000:00:1f.2: reg 0x10: [io 0xf130-0xf137] [ 0.344780] pci 0000:00:1f.2: reg 0x14: [io 0xf120-0xf123] [ 0.344793] pci 0000:00:1f.2: reg 0x18: [io 0xf110-0xf117] [ 0.344805] pci 0000:00:1f.2: reg 0x1c: [io 0xf100-0xf103] [ 0.344819] pci 0000:00:1f.2: reg 0x20: [io 0xf0f0-0xf0ff] [ 0.344832] pci 0000:00:1f.2: reg 0x24: [io 0xf0e0-0xf0ef] [ 0.344950] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.344975] pci 0000:00:1f.3: reg 0x10: [mem 0xfe424000-0xfe4240ff 64bit] [ 0.345012] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.345104] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185 [ 0.345131] pci 0000:00:1f.5: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.345144] pci 0000:00:1f.5: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.345157] pci 0000:00:1f.5: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.345170] pci 0000:00:1f.5: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.345184] pci 0000:00:1f.5: reg 0x20: [io 0xf090-0xf09f] [ 0.345196] pci 0000:00:1f.5: reg 0x24: [io 0xf080-0xf08f] [ 0.345417] pci 0000:01:00.0: [1283:8892] type 01 class 0x060400 [ 0.345646] pci 0000:01:00.0: supports D1 D2 [ 0.345647] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.345693] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.345712] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.345717] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 0.345964] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.346464] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.346506] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.346546] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.346585] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.346624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.346663] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.346703] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.346742] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.346814] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.346822] ACPI: \_SB_.PCI0: notify handler is installed [ 0.346854] Found 1 acpi root devices [ 0.346919] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.346921] vgaarb: loaded [ 0.346921] vgaarb: bridge control possible 0000:00:02.0 [ 0.347039] SCSI subsystem initialized [ 0.347041] ACPI: bus type ATA registered [ 0.347066] libata version 3.00 loaded. [ 0.347076] ACPI: bus type USB registered [ 0.347086] usbcore: registered new interface driver usbfs [ 0.347093] usbcore: registered new interface driver hub [ 0.347106] usbcore: registered new device driver usb [ 0.347170] PCI: Using ACPI for IRQ routing [ 0.350130] PCI: pci_cache_line_size set to 64 bytes [ 0.350179] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.350180] e820: reserve RAM buffer [mem 0xda95c000-0xdbffffff] [ 0.350182] e820: reserve RAM buffer [mem 0xdabc2000-0xdbffffff] [ 0.350183] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.350185] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.350243] NetLabel: Initializing [ 0.350244] NetLabel: domain hash size = 128 [ 0.350245] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.350252] NetLabel: unlabeled traffic allowed by default [ 0.350294] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.350298] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.352318] Switched to clocksource hpet [ 0.355882] AppArmor: AppArmor Filesystem Enabled [ 0.355901] pnp: PnP ACPI init [ 0.355911] ACPI: bus type PNP registered [ 0.356002] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.356004] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.356005] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.356007] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.356008] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.356011] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.356123] system 00:01: [io 0x0778-0x077f] has been reserved [ 0.356126] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.356335] pnp 00:02: [dma 0 disabled] [ 0.356375] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.356587] pnp 00:03: [dma 3] [ 0.356667] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.356675] pnp 00:04: [dma 4] [ 0.356685] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.356705] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.356718] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.356751] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.356753] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.356771] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.356904] system 00:09: [io 0x0400-0x0453] could not be reserved [ 0.356905] system 00:09: [io 0x0458-0x047f] has been reserved [ 0.356907] system 00:09: [io 0x1180-0x119f] has been reserved [ 0.356908] system 00:09: [io 0x0500-0x057f] has been reserved [ 0.356910] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.356912] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.356914] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.356915] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.356917] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.356958] system 00:0a: [io 0x0454-0x0457] has been reserved [ 0.356960] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.357045] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.357150] pnp: PnP ACPI: found 12 devices [ 0.357151] ACPI: bus type PNP unregistered [ 0.363135] pci 0000:01:00.0: PCI bridge to [bus 02] [ 0.363169] pci 0000:00:1c.0: PCI bridge to [bus 01-02] [ 0.363263] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] [ 0.363265] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] [ 0.363266] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] [ 0.363268] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] [ 0.363269] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] [ 0.363271] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] [ 0.363272] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff] [ 0.363294] NET: Registered protocol family 2 [ 0.363418] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.363546] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.363649] TCP: Hash tables configured (established 32768 bind 32768) [ 0.363668] TCP: reno registered [ 0.363673] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.363690] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.363740] NET: Registered protocol family 1 [ 0.364119] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.364131] pci 0000:00:02.0: Boot video device [ 0.364342] PCI: CLS 64 bytes, default 64 [ 0.364371] Trying to unpack rootfs image as initramfs... [ 0.693287] Freeing initrd memory: 24668K (ffff880034fc2000 - ffff8800367d9000) [ 0.693292] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.693294] software IO TLB [mem 0xd695c000-0xda95c000] (64MB) mapped at [ffff8800d695c000-ffff8800da95bfff] [ 0.693478] Scanning for low memory corruption every 60 seconds [ 0.693695] Initialise module verification [ 0.693729] audit: initializing netlink socket (disabled) [ 0.693737] type=2000 audit(1389866249.472:1): initialized [ 0.714746] bounce pool size: 64 pages [ 0.714754] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.715581] zbud: loaded [ 0.715681] VFS: Disk quotas dquot_6.5.2 [ 0.715712] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.716055] fuse init (API version 7.22) [ 0.716105] msgmni has been set to 7717 [ 0.716567] Key type asymmetric registered [ 0.716570] Asymmetric key parser 'x509' registered [ 0.716608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.716638] io scheduler noop registered [ 0.716640] io scheduler deadline registered (default) [ 0.716657] io scheduler cfq registered [ 0.716741] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.716848] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.716850] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.716855] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.716863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.716872] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.716909] intel_idle: MWAIT substates: 0x1120 [ 0.716911] intel_idle: v0.4 model 0x2A [ 0.716912] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.716974] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.716978] ACPI: Power Button [PWRB] [ 0.717003] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.717005] ACPI: Power Button [PWRF] [ 0.717052] ACPI: Requesting acpi_cpufreq [ 0.718119] GHES: HEST is not enabled! [ 0.718169] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.738714] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.739702] Linux agpgart interface v0.103 [ 0.740591] brd: module loaded [ 0.741064] loop: module loaded [ 0.741132] ata_piix 0000:00:1f.2: version 2.13 [ 0.741193] ata_piix 0000:00:1f.2: MAP [ [ 0.741194] P0 P2 P1 P3 ] [ 0.896504] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.896677] scsi0 : ata_piix [ 0.896988] scsi1 : ata_piix [ 0.897260] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 [ 0.897266] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 [ 0.897315] ata_piix 0000:00:1f.5: MAP [ [ 0.897316] P0 -- P1 -- ] [ 1.052540] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 1.052547] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.052669] scsi2 : ata_piix [ 1.052925] scsi3 : ata_piix [ 1.053144] ata3: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19 [ 1.053146] ata4: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19 [ 1.053308] libphy: Fixed MDIO Bus: probed [ 1.053360] tun: Universal TUN/TAP device driver, 1.6 [ 1.053361] tun: (C) 1999-2004 Max Krasnyansky [ 1.053397] PPP generic driver version 2.4.2 [ 1.053429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.053430] ehci-pci: EHCI PCI platform driver [ 1.053491] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1.053497] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.053501] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.053517] ehci-pci 0000:00:1a.0: debug port 2 [ 1.057412] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.057425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe426000 [ 1.068527] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.068541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.068543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.068544] usb usb1: Product: EHCI Host Controller [ 1.068546] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd [ 1.068547] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.068620] hub 1-0:1.0: USB hub found [ 1.068624] hub 1-0:1.0: 2 ports detected [ 1.068735] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1.068739] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.068743] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.068758] ehci-pci 0000:00:1d.0: debug port 2 [ 1.072645] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.072656] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe425000 [ 1.084529] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.084538] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.084539] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.084541] usb usb2: Product: EHCI Host Controller [ 1.084542] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd [ 1.084543] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.084605] hub 2-0:1.0: USB hub found [ 1.084607] hub 2-0:1.0: 2 ports detected [ 1.084661] ehci-platform: EHCI generic platform driver [ 1.084666] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.084667] ohci-platform: OHCI generic platform driver [ 1.084671] uhci_hcd: USB Universal Host Controller Interface driver [ 1.084707] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.087421] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.087424] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.087506] mousedev: PS/2 mouse device common for all mice [ 1.087603] rtc_cmos 00:05: RTC can wake from S4 [ 1.087721] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.087751] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.087789] device-mapper: uevent: version 1.0.3 [ 1.087832] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 1.087882] cpuidle: using governor ladder [ 1.087949] cpuidle: using governor menu [ 1.087955] ledtrig-cpu: registered to indicate activity on CPUs [ 1.088011] TCP: cubic registered [ 1.088070] NET: Registered protocol family 10 [ 1.088199] NET: Registered protocol family 17 [ 1.088211] Key type dns_resolver registered [ 1.088382] PM: Hibernation image not present or could not be loaded. [ 1.088384] Loading module verification certificates [ 1.089135] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa' [ 1.089143] registered taskstats version 1 [ 1.090707] Key type trusted registered [ 1.092421] Key type encrypted registered [ 1.094250] AppArmor: AppArmor sha1 policy hashing enabled [ 1.094648] Magic number: 14:565:980 [ 1.094679] memory memory27: hash matches [ 1.094752] rtc_cmos 00:05: setting system clock to 2014-01-16 09:57:30 UTC (1389866250) [ 1.095438] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.095439] EDD information not available. [ 1.380651] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.513120] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.513126] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.513406] hub 1-1:1.0: USB hub found [ 1.513499] hub 1-1:1.0: 4 ports detected [ 1.624713] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.692729] tsc: Refined TSC clocksource calibration: 2893.426 MHz [ 1.757060] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.757065] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.757344] hub 2-1:1.0: USB hub found [ 1.757436] hub 2-1:1.0: 6 ports detected [ 1.828968] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.924490] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52e [ 1.924495] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.924498] usb 1-1.1: Product: USB Receiver [ 1.924500] usb 1-1.1: Manufacturer: Logitech [ 2.029019] usb 2-1.5: new high-speed USB device number 3 using ehci-pci [ 2.144195] usb 2-1.5: New USB device found, idVendor=19d2, idProduct=1408 [ 2.144200] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 2.144203] usb 2-1.5: Product: ZTE WCDMA Technologies MSM [ 2.144205] usb 2-1.5: Manufacturer: ZTE,Incorporated [ 2.144207] usb 2-1.5: SerialNumber: MF8250ZTED000000 [ 2.244924] ata2.01: failed to resume link (SControl 0) [ 2.248855] ata1.01: failed to resume link (SControl 0) [ 2.369105] hub 2-1:1.0: over-current condition on port 1 [ 2.401065] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.401083] ata2.01: SATA link down (SStatus 0 SControl 0) [ 2.401104] ata2.01: link offline, clearing class 3 to NONE [ 2.404981] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.404995] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2.409168] ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NS70, GN00, max UDMA/100 [ 2.413638] ata1.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 [ 2.413643] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.421652] ata1.00: configured for UDMA/133 [ 2.421858] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 2.422004] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.422016] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.422280] sd 0:0:0:0: [sda] Write Protect is off [ 2.422283] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.422381] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.425157] ata2.00: configured for UDMA/100 [ 2.433812] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS70 GN00 PQ: 0 ANSI: 5 [ 2.442535] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.442539] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.442687] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.442794] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.465097] sda: sda1 sda2 < sda5 > [ 2.466004] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.466740] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000) [ 2.466741] Write protecting the kernel read-only data: 12288k [ 2.468702] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000) [ 2.470092] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000) [ 2.479669] systemd-udevd[128]: starting version 204 [ 2.489146] pps_core: module verification failed: signature and/or required key missing - tainting kernel [ 2.489441] pps_core: LinuxPPS API ver. 1 registered [ 2.489443] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.489587] PTP clock support registered [ 2.490352] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 2.490354] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 2.490443] e1000e 0000:00:19.0: setting latency timer to 64 [ 2.490518] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.490544] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 2.492513] hidraw: raw HID events driver (C) Jiri Kosina [ 2.493500] [drm] Initialized drm 1.1.0 20060810 [ 2.495293] usb-storage 2-1.5:1.2: USB Mass Storage device detected [ 2.495345] scsi4 : usb-storage 2-1.5:1.2 [ 2.495387] usbcore: registered new interface driver usb-storage [ 2.497002] usbcore: registered new interface driver usbhid [ 2.497004] usbhid: USB HID core driver [ 2.513509] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2 [ 2.513587] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0 [ 2.513751] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3 [ 2.513888] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1 [ 2.577156] hub 2-1:1.0: over-current condition on port 2 [ 2.693143] Switched to clocksource tsc [ 2.756522] e1000e 0000:00:19.0 eth0: registered PHC clock [ 2.756525] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e0:69:95:c3:e7:f5 [ 2.756526] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.756559] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 2.757384] [drm] Memory usable by graphics device = 2048M [ 2.757389] i915 0000:00:02.0: setting latency timer to 64 [ 2.779560] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 2.779566] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.779567] [drm] Driver supports precise vblank timestamp query. [ 2.779608] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.782217] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 2.782219] [drm] This can cause pipe underruns and display issues. [ 2.782220] [drm] Please upgrade your BIOS to fix this. [ 2.785067] hub 2-1:1.0: over-current condition on port 3 [ 2.811066] fbcon: inteldrmfb (fb0) is primary device [ 2.993122] hub 2-1:1.0: over-current condition on port 4 [ 3.013085] Console: switching to colour frame buffer device 170x48 [ 3.014951] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.014952] i915 0000:00:02.0: registered panic notifier [ 3.014965] i915: No ACPI video bus found [ 3.014987] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.183675] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.494440] scsi 4:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 3.495020] scsi 4:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 3.497226] sr1: scsi-1 drive [ 3.497332] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 3.497378] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 3.497461] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 3.500733] sd 4:0:0:1: [sdb] Attached SCSI removable disk [ 4.037669] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 8.046244] Adding 4098044k swap on /dev/sda5. Priority:-1 extents:1 across:4098044k FS [ 8.156761] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.182881] systemd-udevd[325]: starting version 204 [ 8.282480] lp: driver loaded but no devices found [ 8.302592] parport_pc 00:03: reported by Plug and Play ACPI [ 8.302624] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP] [ 8.312086] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.313267] mei_me 0000:00:16.0: setting latency timer to 64 [ 8.313304] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 8.331350] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14 [ 8.334307] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8.352028] SKU: Nid=0x1d sku_cfg=0x4016c629 [ 8.352030] SKU: port_connectivity=0x1 [ 8.352031] SKU: enable_pcbeep=0x1 [ 8.352032] SKU: check_sum=0x00000006 [ 8.352033] SKU: customization=0x000000c6 [ 8.352034] SKU: external_amp=0x5 [ 8.352035] SKU: platform_type=0x0 [ 8.352035] SKU: swap=0x0 [ 8.352036] SKU: override=0x1 [ 8.352315] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 8.352316] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.352317] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.352318] mono: mono_out=0x0 [ 8.352319] dig-out=0x11/0x0 [ 8.352319] inputs: [ 8.352321] Front Mic=0x19 [ 8.352322] Rear Mic=0x18 [ 8.352323] Line=0x1a [ 8.352324] realtek: No valid SSID, checking pincfg 0x4016c629 for NID 0x1d [ 8.352325] realtek: Enabling init ASM_ID=0xc629 CODEC_ID=10ec0892 [ 8.362139] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 8.362189] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 8.362225] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 8.398556] lp0: using parport0 (interrupt-driven). [ 8.451954] ppdev: user-space parallel port driver [ 8.456294] gpio_ich: GPIO from 180 to 255 on gpio_ich [ 8.525259] type=1400 audit(1389866257.923:2): apparmor="STATUS" operation="profile_load" parent=367 profile="unconfined" name="/sbin/dhclient" pid=394 comm="apparmor_parser" [ 8.525265] type=1400 audit(1389866257.923:3): apparmor="STATUS" operation="profile_load" parent=367 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser" [ 8.525268] type=1400 audit(1389866257.923:4): apparmor="STATUS" operation="profile_load" parent=367 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser" [ 8.525276] type=1400 audit(1389866257.923:5): apparmor="STATUS" operation="profile_replace" parent=402 profile="unconfined" name="/sbin/dhclient" pid=403 comm="apparmor_parser" [ 8.525282] type=1400 audit(1389866257.923:6): apparmor="STATUS" operation="profile_replace" parent=402 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser" [ 8.525285] type=1400 audit(1389866257.923:7): apparmor="STATUS" operation="profile_replace" parent=402 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser" [ 8.525681] type=1400 audit(1389866257.923:8): apparmor="STATUS" operation="profile_replace" parent=367 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=394 comm="apparmor_parser" [ 8.525685] type=1400 audit(1389866257.923:9): apparmor="STATUS" operation="profile_replace" parent=367 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=394 comm="apparmor_parser" [ 8.525697] type=1400 audit(1389866257.923:10): apparmor="STATUS" operation="profile_replace" parent=402 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=403 comm="apparmor_parser" [ 8.525700] type=1400 audit(1389866257.923:11): apparmor="STATUS" operation="profile_replace" parent=402 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=403 comm="apparmor_parser" [ 9.221660] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14 [ 9.224064] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14 [ 9.224444] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14 [ 9.224950] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 9.411660] cdc_ether 2-1.5:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.5, CDC Ethernet Device, 34:4b:50:b7:ef:4a [ 9.411677] usbcore: registered new interface driver cdc_ether [ 10.191045] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.304074] init: failsafe main process (639) killed by TERM signal [ 10.649789] Bluetooth: Core ver 2.16 [ 10.649801] NET: Registered protocol family 31 [ 10.649802] Bluetooth: HCI device and connection manager initialized [ 10.649816] Bluetooth: HCI socket layer initialized [ 10.649817] Bluetooth: L2CAP socket layer initialized [ 10.649821] Bluetooth: SCO socket layer initialized [ 10.652129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.652131] Bluetooth: BNEP filters: protocol multicast [ 10.652136] Bluetooth: BNEP socket layer initialized [ 10.652849] Bluetooth: RFCOMM TTY layer initialized [ 10.652854] Bluetooth: RFCOMM socket layer initialized [ 10.652855] Bluetooth: RFCOMM ver 1.11 [ 10.990881] init: avahi-cups-reload main process (844) terminated with status 1 [ 331.912703] usb 2-1.5: USB disconnect, device number 3 [ 331.912757] cdc_ether 2-1.5:1.0 eth1: unregister 'cdc_ether' usb-0000:00:1d.0-1.5, CDC Ethernet Device [ 341.363277] usb 2-1.5: new high-speed USB device number 4 using ehci-pci [ 341.476579] usb 2-1.5: New USB device found, idVendor=19d2, idProduct=1225 [ 341.476584] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 341.476588] usb 2-1.5: Product: ZTE WCDMA Technologies MSM [ 341.476590] usb 2-1.5: Manufacturer: ZTE,Incorporated [ 341.476592] usb 2-1.5: SerialNumber: MF8250ZTED000000 [ 341.494121] usb-storage 2-1.5:1.0: USB Mass Storage device detected [ 341.494385] scsi5 : usb-storage 2-1.5:1.0 [ 342.529020] scsi 5:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 342.537762] scsi 5:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 342.658410] sr1: scsi-1 drive [ 342.658652] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 342.658721] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 342.659949] sd 5:0:0:1: Attached scsi generic sg3 type 0 [ 343.366353] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 347.623402] usb 2-1.5: USB disconnect, device number 4 [ 347.893105] usb 2-1.5: new high-speed USB device number 5 using ehci-pci [ 348.006278] usb 2-1.5: New USB device found, idVendor=19d2, idProduct=1408 [ 348.006283] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 348.006286] usb 2-1.5: Product: ZTE WCDMA Technologies MSM [ 348.006289] usb 2-1.5: Manufacturer: ZTE,Incorporated [ 348.006291] usb 2-1.5: SerialNumber: MF8250ZTED000000 [ 348.030523] cdc_ether 2-1.5:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.5, CDC Ethernet Device, 34:4b:50:b7:ef:4a [ 348.031048] usb-storage 2-1.5:1.2: USB Mass Storage device detected [ 348.031287] scsi6 : usb-storage 2-1.5:1.2 [ 349.030078] scsi 6:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 349.030572] scsi 6:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 349.034006] sr1: scsi-1 drive [ 349.034219] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 349.034317] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 349.037468] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 349.052618] sd 6:0:0:1: [sdb] Attached SCSI removable disk [ 353.317752] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 353.326260] ISOFS: changing to secondary root [ 448.644822] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 448.747896] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 448.748031] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 448.748438] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 750.872401] usb 2-1.6: new high-speed USB device number 6 using ehci-pci [ 750.965905] usb 2-1.6: New USB device found, idVendor=04e8, idProduct=689e [ 750.965910] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 750.965913] usb 2-1.6: Product: Samsung Android USB Device [ 750.965916] usb 2-1.6: Manufacturer: SAMSUNG Electronics Co., Ltd. [ 750.965918] usb 2-1.6: SerialNumber: S75009fe06447 [ 750.966928] usb-storage 2-1.6:1.3: USB Mass Storage device detected [ 750.967117] scsi7 : usb-storage 2-1.6:1.3 [ 751.078520] cdc_acm 2-1.6:1.0: This device cannot do calls on its own. It is not a modem. [ 751.078585] cdc_acm 2-1.6:1.0: ttyACM0: USB ACM device [ 751.079068] usbcore: registered new interface driver cdc_acm [ 751.079072] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 751.965371] scsi 7:0:0:0: Direct-Access SAMSUNG GT-S7500 0100 PQ: 0 ANSI: 2 [ 751.965819] scsi 7:0:0:1: Direct-Access SAMSUNG GT-S7500 Card 0100 PQ: 0 ANSI: 2 [ 751.966150] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 751.966355] sd 7:0:0:1: Attached scsi generic sg5 type 0 [ 751.972550] sd 7:0:0:1: [sdd] Attached SCSI removable disk [ 751.973501] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 790.927098] sd 7:0:0:1: [sdd] 15515648 512-byte logical blocks: (7.94 GB/7.39 GiB) [ 790.927919] sd 7:0:0:1: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 790.931951] sdd: [ 798.483659] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 799.125904] sd 7:0:0:0: [sdc] 3849068 512-byte logical blocks: (1.97 GB/1.83 GiB) [ 799.143659] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 799.178810] sdc: [ 840.603720] sdc: detected capacity change from 1970722816 to 0 [ 853.920840] VFS: busy inodes on changed media or resized disk sdd [ 853.921614] FAT-fs (sdd): unable to read inode block for updating (i_pos 131097) [ 853.953475] sdd: detected capacity change from 7944011776 to 0 [ 1049.762484] PPP BSD Compression module registered [ 1049.780986] PPP Deflate Compression module registered [ 1063.585219] usb 2-1.5: USB disconnect, device number 5 [ 1063.587410] cdc_ether 2-1.5:1.0 eth1: unregister 'cdc_ether' usb-0000:00:1d.0-1.5, CDC Ethernet Device [ 1563.171158] usb 2-1.6: USB disconnect, device number 6 [ 1563.176167] sd 7:0:0:0: [sdc] Synchronizing SCSI cache [ 1563.176211] sd 7:0:0:0: [sdc] [ 1563.176214] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 1563.177524] sd 7:0:0:1: [sdd] Synchronizing SCSI cache [ 1563.177557] sd 7:0:0:1: [sdd] [ 1563.177559] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 1828.774775] usb 2-1.5: new high-speed USB device number 7 using ehci-pci [ 1828.894176] usb 2-1.5: New USB device found, idVendor=19d2, idProduct=1225 [ 1828.894182] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 1828.894185] usb 2-1.5: Product: ZTE WCDMA Technologies MSM [ 1828.894187] usb 2-1.5: Manufacturer: ZTE,Incorporated [ 1828.894190] usb 2-1.5: SerialNumber: MF8250ZTED000000 [ 1828.920360] usb-storage 2-1.5:1.0: USB Mass Storage device detected [ 1828.920600] scsi8 : usb-storage 2-1.5:1.0 [ 1829.927950] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 1829.937008] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 1830.004263] sr1: scsi-1 drive [ 1830.004522] sr 8:0:0:0: Attached scsi CD-ROM sr1 [ 1830.004741] sr 8:0:0:0: Attached scsi generic sg2 type 5 [ 1830.006206] sd 8:0:0:1: Attached scsi generic sg3 type 0 [ 1830.717753] sd 8:0:0:1: [sdb] Attached SCSI removable disk [ 1835.005277] usb 2-1.5: USB disconnect, device number 7 [ 1835.340598] usb 2-1.5: new high-speed USB device number 8 using ehci-pci [ 1835.464760] usb 2-1.5: New USB device found, idVendor=19d2, idProduct=1408 [ 1835.464765] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 1835.464768] usb 2-1.5: Product: ZTE WCDMA Technologies MSM [ 1835.464771] usb 2-1.5: Manufacturer: ZTE,Incorporated [ 1835.464773] usb 2-1.5: SerialNumber: MF8250ZTED000000 [ 1835.483094] cdc_ether 2-1.5:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.5, CDC Ethernet Device, 34:4b:50:b7:ef:4a [ 1835.483519] usb-storage 2-1.5:1.2: USB Mass Storage device detected [ 1835.483788] scsi9 : usb-storage 2-1.5:1.2 [ 1836.481919] scsi 9:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 1836.482411] scsi 9:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 1836.487771] sr1: scsi-1 drive [ 1836.487991] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 1836.488093] sr 9:0:0:0: Attached scsi generic sg2 type 5 [ 1836.488388] sd 9:0:0:1: Attached scsi generic sg3 type 0 [ 1836.501615] sd 9:0:0:1: [sdb] Attached SCSI removable disk [ 1847.849128] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 1847.850344] ISOFS: changing to secondary root chandan@chandan-Invalid-entry-length-0-DMI-table-is-broken-Stop:~$