U-Boot 2018.01-rc2-00001-g5dd2fb5da6 (Dec 29 2017 - 09:59:01 -0600), Build: jenkins-github_Bootloader-Builder-22 OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment Beagle xM Rev C No EEPROM on expansion board No EEPROM on expansion board OMAP die ID: 12a200029ff80000016842c815012008 Net: usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Checking for: /uEnv.txt ... Checking for: /boot/uEnv.txt ... 290 bytes read in 17 ms (16.6 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... Running uname_boot ... loading /boot/vmlinuz-4.14.10-armv7-x4 ... 6779392 bytes read in 537 ms (12 MiB/s) loading /boot/dtbs/4.14.10-armv7-x4/omap3-beagle-xm.dtb ... 100576 bytes read in 100 ms (981.4 KiB/s) loading /boot/initrd.img-4.14.10-armv7-x4 ... 3365357 bytes read in 273 ms (11.8 MiB/s) debug: [console=ttyO2,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:3359ed 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 89cca000, end 89fff9ed ... OK Loading Device Tree to 89cae000, end 89cc98df ... OK Starting kernel ... [ 1.546142] dmi: Firmware registration failed. [ 2.171203] tfp410 encoder0: failed to parse PD gpio [ 2.176971] connector-dvi connector0: failed to find video source [ 2.185485] Error: Driver 'tfp410' is already registered, aborting... [ 2.367950] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517 [ 2.460876] dmi-sysfs: dmi entry is absent. [ 2.484374] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.491546] omap2_set_init_voltage: unable to set vdd_core Loading, please wait... fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmcblk0p2 fsck exited with status code 8 [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. Starting Apply Kernel Variables... Mounting FUSE Control File System... Mounting Configuration File System... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Configuration File System. Starting udev Kernel Device Manager... [ OK ] Started Journal Service. [ OK ] Started udev Kernel Device Manager. Starting LSB: Set preliminary keymap... Starting LSB: Tune IDE hard disks... [ OK ] Started LSB: Set preliminary keymap. Starting Remount Root and Kernel File Systems... [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting Flush Journal to Persistent Storage... [ OK ] Started LSB: Tune IDE hard disks. [ OK ] Started Load/Save Random Seed. [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Listening on node-red.socket. [ OK ] Listening on cloud9.socket. [ OK ] Listening on bonescript.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting System Logging Service... Starting Generic Board Startup... Starting LSB: Start busybox udhcpd at boot time... Starting Restore /etc/resolv.conf i...e the ppp link was shut down.... [ OK ] Started Entropy daemon using the HAVEGE algorithm. [ OK ] Started D-Bus System Message Bus. Starting Connection service... [ OK ] Started Bonescript autorun. Starting Login Service... Starting BB WL18xx wlan0 Service... Starting Cape Manager Service... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Regular background program processing daemon. [ OK ] Started Deferred execution scheduler. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting LSB: Load kernel modules needed to enable cpufreq scaling... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if...ore the ppp link was shut down.. [ OK ] Started BB WL18xx wlan0 Service. [ OK ] Started Cape Manager Service. [ OK ] Started LSB: Start busybox udhcpd at boot time. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Connection service. [ OK ] Started Login Service. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. Starting WPA supplicant... Starting LSB: set CPUFreq kernel parameters... Starting Hostname Service... [ OK ] Started Raise network interfaces. [ OK ] Started WPA supplicant. [ OK ] Started Hostname Service. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting LSB: Apache2 web server... Starting LSB: Advanced IEEE 802.11 management daemon... Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started Permit User Sessions. [ OK ] Started OpenBSD Secure Shell server. Starting Light Display Manager... [ OK ] Started Getty on tty1. [ OK ] Started Light Display Manager. [ OK ] Started LSB: Apache2 web server. [ 43.118988] omap_ssi_port 4805a000.ssi-port: couldn't get cawake gpio (err=-2)! [ 43.302642] omap_ssi_port 4805b000.ssi-port: couldn't get cawake gpio (err=-2)! [ OK ] Stopped Light Display Manager. Starting Light Display Manager... [ OK ] Started Light Display Manager. [ *** ] (2 of 3) A start job is running for dev-ttyS2.device (36s / 1min 30s)[ 51.527404] OF: graph: no port node found in /ocp@68000000/isp@480bc000/ports [ OK ] Found device /dev/ttyS2. [ OK ] Started Serial Getty on ttyS2. [ OK ] Stopped Light Display Manager. Starting Light Display Manager... [ OK ] Started Light Display Manager. [ 76.389831] INFO: rcu_sched detected stalls on CPUs/tasks: [ 76.395355] (detected by 0, t=5252 jiffies, g=13644, c=13643, q=84) [ 76.401763] All QSes seen, last rcu_sched kthread activity 5252 (-55902--61154), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 76.413452] rcu_sched kthread starved for 5252 jiffies! g13644 c13643 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=0