U-Boot 2018.01-rc2-00001-gd67c2b4dc8 (Dec 19 2017 - 13:29:35 -0600), Build: jenkins-github_Bootloader-Builder-19 OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment Beagle xM Rev C No EEPROM on expansion board No EEPROM on expansion board OMAP die ID: 12a200029ff80000016842c815012008 Net: usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Checking for: /uEnv.txt ... reading /uEnv.txt 134 bytes read in 3 ms (43 KiB/s) Loaded environment from /uEnv.txt Checking if uenvcmd is set ... Checking for: /boot/uEnv.txt ... 289 bytes read in 21 ms (12.7 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... Running uname_boot ... loading /boot/vmlinuz-4.14.8-armv7-x3 ... 6738432 bytes read in 539 ms (11.9 MiB/s) loading /boot/dtbs/4.14.8-armv7-x3/omap3-beagle-xm.dtb ... 100576 bytes read in 168 ms (584 KiB/s) loading /boot/initrd.img-4.14.8-armv7-x3 ... 4229963 bytes read in 343 ms (11.8 MiB/s) root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:408b4b 0x88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fbf7000, end 8ffffb4b ... OK Loading Device Tree to 8fbdb000, end 8fbf68df ... OK Starting kernel ... [ 1.537628] dmi: Firmware registration failed. [ 2.226806] tfp410 encoder0: failed to parse PD gpio [ 2.232543] connector-dvi connector0: failed to find video source [ 2.241027] Error: Driver 'tfp410' is already registered, aborting... [ 2.426757] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517 [ 2.516174] dmi-sysfs: dmi entry is absent. [ 2.539184] omap2_set_init_voltage: unable to find boot up OPP for vdd_core [ 2.546386] omap2_set_init_voltage: unable to set vdd_core Welcome to Debian GNU/Linux 9 (stretch)! [ OK ] Reached target Remote File Systems. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Swap. [ OK ] Listening on udev Control Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Syslog Socket. [ OK ] Reached target Paths. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Encrypted Volumes. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ OK ] Created slice System Slice. [ OK ] Reached target Slices. [ OK ] Created slice system-getty.slice. Mounting POSIX Message Queue File System... [ OK ] Created slice system-serial\x2dgetty.slice. Mounting /sys/kernel/debug... [ OK ] Listening on Journal Socket. Starting Journal Service... Starting File System Check on Root Device... Starting Load Kernel Modules... Starting Create list of required st…ce nodes for the current kernel... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /sys/kernel/debug. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started File System Check Daemon to report status. Starting Create Static Device Nodes in /dev... [ OK ] Started File System Check on Root Device. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. Mounting Configuration File System... Mounting FUSE Control File System... Starting Apply Kernel Variables... Starting Remount Root and Kernel File Systems... [ OK ] Mounted Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. Starting udev Kernel Device Manager... [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems. Starting Raise network interfaces... [ OK ] Started Journal Service. [ OK ] Started Load/Save Random Seed. Starting Flush Journal to Persistent Storage... [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Entropy daemon using the HAVEGE algorithm. Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Raise network interfaces. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on cloud9.socket. [ OK ] Listening on node-red.socket. [ OK ] Listening on bonescript.socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily apt download activities. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Bonescript autorun. Starting System Logging Service... Starting Generic Board Startup... Starting LSB: Start busybox udhcpd at boot time... [ OK ] Started Deferred execution scheduler. Starting BB WL18xx wlan0 Service... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... Starting LSB: Load kernel modules needed to enable cpufreq scaling... [ OK ] Started Regular background program processing daemon. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Connection service... [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. Starting Login Service... [ OK ] Started System Logging Service. [ OK ] Started BB WL18xx wlan0 Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started LSB: Start busybox udhcpd at boot time. [ OK ] Started Connection service. [ OK ] Started Login Service. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting The Apache HTTP Server... Starting Permit User Sessions... [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Permit User Sessions. Starting Light Display Manager... [ OK ] Started Getty on tty1. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... Starting Hostname Service... Starting WPA supplicant... [ OK ] Started WPA supplicant. [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started Hostname Service. [ OK ] Started Light Display Manager. [ OK ] Started The Apache HTTP Server. [ 31.853881] omap_ssi_port 4805a000.ssi-port: couldn't get cawake gpio (err=-2)! [ 32.293731] omap_ssi_port 4805b000.ssi-port: couldn't get cawake gpio (err=-2)! [ OK ] Stopped Light Display Manager. Starting Light Display Manager... [ OK ] Started Light Display Manager. [ OK ] Stopped Light Display Manager. Starting Light Display Manager... [ OK ] Found device /dev/ttyS2. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. [ 48.008605] OF: graph: no port node found in /ocp@68000000/isp@480bc000/ports [ OK ] Started Light Display Manager. [ OK ] Stopped Light Display Manager. Starting Light Display Manager... [ OK ] Started Light Display Manager. Debian GNU/Linux 9 beagleboard ttyS2 BeagleBoard.org Debian Image 2017-12-24 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beagleboard login: