U-Boot SPL 2018.03-rc3-00002-g97c27b4ee5 (Feb 20 2018 - 20:15:25 -0600) Trying to boot from MMC2 U-Boot 2018.03-rc3-00002-g97c27b4ee5 (Feb 20 2018 - 20:15:25 -0600), Build: jenkins-github_Bootloader-Builder-38 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: Model: SeeedStudio BeagleBone Green Wireless: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE Could not get PHY for cpsw: addr 0 cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[GW1A] ... Card did not respond to voltage select! Card did not respond to voltage select! Card did not respond to voltage select! gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! Card did not respond to voltage select! switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2063 bytes read in 14 ms (143.6 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.16.0-rc2-bone3 ... 10183168 bytes read in 659 ms (14.7 MiB/s) uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/4.16.0-rc2-bone3/am335x-boneblack-uboot-univ.dtb ... 156503 bytes read in 40 ms (3.7 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1440 bytes read in 130 ms (10.7 KiB/s) uboot_overlays: loading /lib/firmware/BB-BBGW-WL1835-00A0.dtbo ... 5003 bytes read in 248 ms (19.5 KiB/s) uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... 494 bytes read in 300 ms (1000 Bytes/s) loading /boot/initrd.img-4.16.0-rc2-bone3 ... 4460929 bytes read in 302 ms (14.1 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] ... debug: [bootz 0x82000000 0x88080000:441181 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fbbe000, end 8ffff181 ... OK reserving fdt memory region: addr=88000000 size=88000 Loading Device Tree to 8fb33000, end 8fbbdfff ... OK Starting kernel ... [ 0.001801] timer_probe: no matching timers found [ 0.265962] l4_wkup_cm:clk:0010:0: failed to disable [ 0.917717] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 1.310568] ti_emif_sram 4c000000.emif: Unable to get sram pool for ocmcram code [ 1.325702] omap_voltage_late_init: Voltage driver support not added rootfs: clean, 85433/231536 files, 485118/924672 blocks [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Remount Root and Kernel File Systems. Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Mounting FUSE Control File System... Mounting Configuration File System... Starting Create Static Device Nodes in /dev... [ OK ] Mounted Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Journal Service. [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Raise network interfaces... Starting udev Kernel Device Manager... [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Entropy daemon using the HAVEGE algorithm. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Raise network interfaces. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on bonescript.socket. [ OK ] Listening on node-red.socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Listening on cloud9.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Generic Board Startup... Starting Avahi mDNS/DNS-SD Stack... Starting BB WL18xx wlan0 Service... Starting System Logging Service... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Connection service... Starting LSB: Start busybox udhcpd at boot time... Starting LSB: Load kernel modules needed to enable cpufreq scaling... [ OK ] Started Deferred execution scheduler. [ OK ] Started Bonescript autorun. Starting Login Service... Starting Restore /etc/resolv.conf i…fore the ppp link was shut down... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down. [ OK ] Started LSB: Start busybox udhcpd at boot time. [ OK ] Started Connection service. [ OK ] Started Login Service. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting The Apache HTTP Server... [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. Starting WPA supplicant... Starting Hostname Service... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started WPA supplicant. [ OK ] Started Hostname Service. [ OK ] Started The Apache HTTP Server. [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Found device /dev/ttyS0. [ OK ] Started Serial Getty on ttyS0. Debian GNU/Linux 9 beaglebone ttyS0 BeagleBoard.org Debian Image 2018-01-28 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login: debian Password: Last login: Wed Feb 21 21:03:07 UTC 2018 on ttyS0 Linux beaglebone 4.16.0-rc2-bone3 #1 Mon Feb 19 18:22:37 UTC 2018 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@beaglebone:~$ debian@beaglebone:~$ systemctl status systemd-modules-load.service ● systemd-modules-load.service - Load Kernel Modules Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static; ven Active: failed (Result: exit-code) since Thu 2016-11-03 17:16:42 UTC; 1 years Docs: man:systemd-modules-load.service(8) man:modules-load.d(5) Process: 1096 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status Main PID: 1096 (code=exited, status=1/FAILURE) Warning: Journal has been rotated since unit was started. Log output is incomple debian@beaglebone:~$ debian@beaglebone:~$