#! /bin/sh # Generated by configure. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=${CONFIG_SHELL-/bin/sh} ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by bash $as_me 3.2-release, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 config_files=" Makefile builtins/Makefile lib/readline/Makefile lib/glob/Makefile lib/intl/Makefile lib/malloc/Makefile lib/sh/Makefile lib/termcap/Makefile lib/tilde/Makefile doc/Makefile support/Makefile po/Makefile.in examples/loadables/Makefile examples/loadables/perl/Makefile pathnames.h" config_headers=" config.h" config_commands=" default-1 default" ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." ac_cs_version="\ bash config.status 3.2-release configured by ./configure, generated by GNU Autoconf 2.59, with options \"'--with-curses'\" Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=. INSTALL="/usr/bin/install -c" # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ac_shift=: ;; -*) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. ac_option=$1 ac_need_defaults=false;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi if $ac_cs_recheck; then echo "running /bin/sh ./configure " '--with-curses' $ac_configure_extra_args " --no-create --no-recursion" >&6 exec /bin/sh ./configure '--with-curses' $ac_configure_extra_args --no-create --no-recursion fi # # INIT-COMMANDS section. # # Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it # from automake. eval 'OBSOLETE_ALL_LINGUAS''=""' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="%UNSET%" for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "builtins/Makefile" ) CONFIG_FILES="$CONFIG_FILES builtins/Makefile" ;; "lib/readline/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/readline/Makefile" ;; "lib/glob/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/glob/Makefile" ;; "lib/intl/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/intl/Makefile" ;; "lib/malloc/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/malloc/Makefile" ;; "lib/sh/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/sh/Makefile" ;; "lib/termcap/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/termcap/Makefile" ;; "lib/tilde/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/tilde/Makefile" ;; "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "support/Makefile" ) CONFIG_FILES="$CONFIG_FILES support/Makefile" ;; "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "examples/loadables/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/loadables/Makefile" ;; "examples/loadables/perl/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/loadables/perl/Makefile" ;; "pathnames.h" ) CONFIG_FILES="$CONFIG_FILES pathnames.h" ;; "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason to put it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF s,@SHELL@,/bin/sh,;t t s,@PATH_SEPARATOR@,:,;t t s,@PACKAGE_NAME@,bash,;t t s,@PACKAGE_TARNAME@,bash,;t t s,@PACKAGE_VERSION@,3.2-release,;t t s,@PACKAGE_STRING@,bash 3.2-release,;t t s,@PACKAGE_BUGREPORT@,bug-bash@gnu.org,;t t s,@exec_prefix@,${prefix},;t t s,@prefix@,/usr/local,;t t s,@program_transform_name@,s,x,x,,;t t s,@bindir@,${exec_prefix}/bin,;t t s,@sbindir@,${exec_prefix}/sbin,;t t s,@libexecdir@,${exec_prefix}/libexec,;t t s,@datadir@,${prefix}/share,;t t s,@sysconfdir@,${prefix}/etc,;t t s,@sharedstatedir@,${prefix}/com,;t t s,@localstatedir@,${prefix}/var,;t t s,@libdir@,${exec_prefix}/lib,;t t s,@includedir@,${prefix}/include,;t t s,@oldincludedir@,/usr/include,;t t s,@infodir@,${prefix}/info,;t t s,@mandir@,${prefix}/man,;t t s,@build_alias@,,;t t s,@host_alias@,,;t t s,@target_alias@,,;t t s,@DEFS@,-DHAVE_CONFIG_H,;t t s,@ECHO_C@,,;t t s,@ECHO_N@,-n,;t t s,@ECHO_T@,,;t t s,@LIBS@,-ldl ,;t t s,@build@,i686-pc-linux-gnu,;t t s,@build_cpu@,i686,;t t s,@build_vendor@,pc,;t t s,@build_os@,linux-gnu,;t t s,@host@,i686-pc-linux-gnu,;t t s,@host_cpu@,i686,;t t s,@host_vendor@,pc,;t t s,@host_os@,linux-gnu,;t t s,@EMACS@,no,;t t s,@lispdir@,,;t t s,@DEBUGGER_START_FILE@,/usr/local/share/bashdb/bashdb-main.inc,;t t s,@TESTSCRIPT@,run-all,;t t s,@PURIFY@,,;t t s,@MALLOC_TARGET@,malloc,;t t s,@MALLOC_SRC@,malloc.c,;t t s,@MALLOC_LIB@,-lmalloc,;t t s,@MALLOC_LIBRARY@,$(ALLOC_LIBDIR)/libmalloc.a,;t t s,@MALLOC_LDFLAGS@,-L$(ALLOC_LIBDIR),;t t s,@MALLOC_DEP@,$(MALLOC_LIBRARY),;t t s,@htmldir@,,;t t s,@HELPDIR@,,;t t s,@HELPDIRDEFINE@,,;t t s,@HELPINSTALL@,,;t t s,@HELPSTRINGS@,,;t t s,@CC@,gcc,;t t s,@CFLAGS@,-g -O2,;t t s,@LDFLAGS@,,;t t s,@CPPFLAGS@,,;t t s,@ac_ct_CC@,gcc,;t t s,@EXEEXT@,,;t t s,@OBJEXT@,o,;t t s,@CPP@,gcc -E,;t t s,@EGREP@,grep -E,;t t s,@CROSS_COMPILE@,,;t t s,@SIGNAMES_H@,lsignames.h,;t t s,@SIGNAMES_O@,,;t t s,@CC_FOR_BUILD@,$(CC),;t t s,@STATIC_LD@,,;t t s,@CFLAGS_FOR_BUILD@,-g,;t t s,@CPPFLAGS_FOR_BUILD@,,;t t s,@LDFLAGS_FOR_BUILD@,$(LDFLAGS),;t t s,@RL_VERSION@,,;t t s,@RL_MAJOR@,,;t t s,@RL_MINOR@,,;t t s,@READLINE_LIB@,-lreadline,;t t s,@READLINE_DEP@,$(READLINE_LIBRARY),;t t s,@RL_LIBDIR@,$(dot)/$(LIBSUBDIR)/readline,;t t s,@RL_INCLUDEDIR@,,;t t s,@RL_INCLUDE@,,;t t s,@HISTORY_LIB@,-lhistory,;t t s,@HISTORY_DEP@,$(HISTORY_LIBRARY),;t t s,@HIST_LIBDIR@,$(dot)/$(LIBSUBDIR)/readline,;t t s,@TILDE_LIB@,-ltilde,;t t s,@INSTALL_PROGRAM@,${INSTALL},;t t s,@INSTALL_SCRIPT@,${INSTALL},;t t s,@INSTALL_DATA@,${INSTALL} -m 644,;t t s,@AR@,ar,;t t s,@RANLIB@,ranlib,;t t s,@ac_ct_RANLIB@,ranlib,;t t s,@YACC@,bison -y,;t t s,@SET_MAKE@,,;t t s,@MAKE_SHELL@,/bin/sh,;t t s,@SIZE@,size,;t t s,@MKINSTALLDIRS@,$(top_builddir)/./support/mkinstalldirs,;t t s,@USE_NLS@,yes,;t t s,@MSGFMT@,/usr/bin/msgfmt,;t t s,@GMSGFMT@,/usr/bin/msgfmt,;t t s,@XGETTEXT@,/usr/bin/xgettext,;t t s,@MSGMERGE@,/usr/bin/msgmerge,;t t s,@ALLOCA@,,;t t s,@GLIBC21@,yes,;t t s,@LIBICONV@,,;t t s,@LTLIBICONV@,,;t t s,@INTLBISON@,bison,;t t s,@BUILD_INCLUDED_LIBINTL@,no,;t t s,@USE_INCLUDED_LIBINTL@,no,;t t s,@CATOBJEXT@,.gmo,;t t s,@DATADIRNAME@,share,;t t s,@INSTOBJEXT@,.mo,;t t s,@GENCAT@,gencat,;t t s,@INTLOBJS@,,;t t s,@INTL_LIBTOOL_SUFFIX_PREFIX@,,;t t s,@INTLLIBS@,,;t t s,@LIBINTL@,,;t t s,@LTLIBINTL@,,;t t s,@POSUB@,po,;t t s,@LIBOBJS@,,;t t s,@INTL_DEP@,,;t t s,@INTL_INC@,,;t t s,@LIBINTL_H@,,;t t s,@SIGLIST_O@,,;t t s,@TERMCAP_LIB@,-lcurses,;t t s,@TERMCAP_DEP@,,;t t s,@JOBS_O@,jobs.o,;t t s,@SHOBJ_CC@,gcc,;t t s,@SHOBJ_CFLAGS@,-fPIC,;t t s,@SHOBJ_LD@,${CC},;t t s,@SHOBJ_LDFLAGS@,-shared -Wl,-soname,$@,;t t s,@SHOBJ_XLDFLAGS@,,;t t s,@SHOBJ_LIBS@,,;t t s,@SHOBJ_STATUS@,supported,;t t s,@PROFILE_FLAGS@,,;t t s,@incdir@,,;t t s,@BUILD_DIR@,/build/bashc-3.2.33.0,;t t s,@ARFLAGS@,cr,;t t s,@BASHVERS@,3.2,;t t s,@RELSTATUS@,release,;t t s,@DEBUG@,,;t t s,@MALLOC_DEBUG@,,;t t s,@LOCAL_LIBS@,,;t t s,@LOCAL_CFLAGS@,,;t t s,@LOCAL_LDFLAGS@,-rdynamic,;t t s,@LOCAL_DEFS@,-DSHELL,;t t s,@LTLIBOBJS@,,;t t CEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } sed "/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; } :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done # # CONFIG_HEADER section. # # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } # Do quote $f, to prevent DOS paths from being IFS'd. echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. sed 's/[ ]*$//' $ac_file_inputs >$tmp/in # Handle all the #define templates only if necessary. if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then # If there are no defines, we may have an empty if/fi : cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in fi # grep # Handle all the #undef templates cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then echo "/* Generated by configure. */" >$tmp/config.h else echo "/* $ac_file. Generated by configure. */" >$tmp/config.h fi cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then if diff $ac_file $tmp/config.h >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file fi else cat $tmp/config.h rm -f $tmp/config.h fi done # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in default-1 ) for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assigment from automake. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= GMOFILES= UPDATEPOFILES= DUMMYPOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do if test -f "$f"; then case "$f" in *.orig | *.bak | *~) ;; *) cat "$f" >> "$ac_dir/Makefile" ;; esac fi done fi ;; esac done ;; default ) # Makefile uses this timestamp file to record whether config.h is up to date. echo timestamp > stamp-h ;; esac done { (exit 0); exit 0; }