Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Time ATAC carbon maintenance??

2 views
Skip to first unread message

Snow Boarder nCA

unread,
May 10, 2000, 3:00:00 AM5/10/00
to
hey,
i have a pair of these pedals...they are my first clipless...

what is the best way to maintain them??? lube them or what? if so what kind?

thanks.


ya!! go mike go... and leave this place!

Snow Boarder nCA

unread,
May 10, 2000, 3:00:00 AM5/10/00
to
come on, someone has to own a pair of these pedals...

help me out.
thanks.
seth

Kathleen

unread,
May 10, 2000, 3:00:00 AM5/10/00
to
Yeah, I've got a pair of Time Atacs. I've had them for about two years
now, and as far as I can tell, they haven't needed any maintenance at
all.

Kathleen

jfa...@my-deja.com

unread,
May 11, 2000, 3:00:00 AM5/11/00
to
The only problem I've had over the past couple months is an annoying
creak from the springs when they are dry. I squirt a little Tri-Flow
lube in the holes where the front bar goes into the pedal. If you look
in through there, you see the coil of the spring mechanism. I put a
drop of lube on each spring whenever they creak. Otherwise, I don't
think there is much to maintain. They're much nicer than SPDs in this
regard.

Brad and Julie Vaughn
Where's that damn creaking coming from...

In article <20000510165333...@ng-ch1.aol.com>,


snowboa...@aol.com (Snow Boarder nCA) wrote:
> come on, someone has to own a pair of these pedals...
>
> help me out.
> thanks.
> seth
>


Sent via Deja.com http://www.deja.com/
Before you buy.

David & Nyla Galdo

unread,
May 12, 2000, 3:00:00 AM5/12/00
to
I have had Time pedals for seven yeas now and serviced the bearing once and
greased the springs when they made a noise. I own both Speedplay and Time
MTB pedals and prefer the Time. I reserve the Time pedals for wet riding
only.

_dag


Snow Boarder nCA <snowboa...@aol.com> wrote in message
news:20000510025603...@ng-mb1.aol.com...

0 new messages