Mitsumi CR-4802TE
Gusenbauer Stefan
thx
Gusenbauer Stefan
Lew Pitcher
I'm not sure what you mean by a 'module for this cd recorder'. I have
a Mitsumi CR4802-TE on my Slackware linux system and it works without
problems both as a CDROM drive and as a CD-RW drive.
As a CDROM drive, it uses the standard IDE interface drivers (a la
/dev/hda), but if you follow the documentation in the "CD Writing
HOWTO" (available at the Linux Documentation Project at
http://www.linuxdoc.org/) and the readme files that come with
cdrecord, it will work in SCSI emulation mode to record CDRs and
CDRWs.
BTW: There has been at least one firmware upgrade released for the
CR4802-TE. Although performance was good prior to the firmware
upgrade, I found that when I applied the upgrade, cdrecord complained
less about the drive. YMMV, but you might want to take a look to see
if your CR4802-TE qualifies for the firmware upgrade. Check Mitsumi's
website for details.
Lew Pitcher
Information Technology Consultant
Toronto Dominion Bank Financial Group
(Opinions expressed are my own, not my employer's.)
Lew Pitcher
>
> On Wed, 18 Oct 2000 20:24:16 +0200, "Gusenbauer Stefan"
> <gusen...@eduhi.at> wrote:
>
> >Does anyone know if there exists a module for this cd recorder?
> >thx
> >Gusenbauer Stefan
>
> I'm not sure what you mean by a 'module for this cd recorder'. I have
> a Mitsumi CR4802-TE on my Slackware linux system and it works without
> problems both as a CDROM drive and as a CD-RW drive.
Further to this, here's what I see on my system....
bash# uname -a
Linux merlin 2.0.38 #12 Sun Mar 12 14:33:37 EST 2000 i486 unknown
bash# cdrecord -scanbus
Cdrecord 1.9 (i486-pc-linux-gnulibc1) Copyright (C) 1995-2000 Jörg
Schilling
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'MITSUMI ' 'CR-4802TE ' '2.1D' Removable
CD-ROM
0,1,0 1) 'SONY ' 'CD-ROM CDU76E-S ' '1.0c' Removable
CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
bash# dmesg | more
...
ide_setup: hdc=ide-scsi
...
hdc: CR-4802TE, ATAPI drive - enabling SCSI emulation
ATAPI overlap supported: No
hdd: CD-ROM CDU76E, ATAPI CDROM drive - enabling SCSI emulation
ATAPI overlap supported: No
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: MITSUMI Model: CR-4802TE Rev: 2.1D
Type: CD-ROM ANSI SCSI revision: 02
Vendor: SONY Model: CD-ROM CDU76E-S Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
0,7,0 7) *
bash# ls -l /dev/sc* /dev/sr* /dev/sg*
brw-r----- 1 root root 11, 0 Jul 18 1994 /dev/scd0
brw-r----- 1 root root 11, 1 Jul 18 1994 /dev/scd1
crw------- 1 root root 21, 0 Jul 25 1999 /dev/sga
crw------- 1 root root 21, 1 Jul 25 1999 /dev/sgb
crw------- 1 root root 21, 2 Jul 25 1999 /dev/sgc
crw------- 1 root root 21, 3 Jul 25 1999 /dev/sgd
crw------- 1 root root 21, 4 Jul 25 1999 /dev/sge
crw------- 1 root root 21, 5 Jul 25 1999 /dev/sgf
crw------- 1 root root 21, 6 Jul 25 1999 /dev/sgg
crw------- 1 root root 21, 7 Jul 25 1999 /dev/sgh
brw-r----- 1 root root 11, 0 Jul 18 1994 /dev/sr0
brw-r----- 1 root root 11, 1 Jul 18 1994 /dev/sr1
bash# cdparanoia -vsQ
cdparanoia III release 9.7 (December 13, 1999)
(C) 1999 Monty <mo...@xiph.org> and Xiphophorus
Report bugs to para...@xiph.org
http://www.xiph.org/paranoia/
Checking /dev/cdrom for cdrom...
Testing /dev/cdrom for cooked ioctl() interface
/dev/scd0 is not a cooked ioctl CDROM.
Testing /dev/cdrom for SCSI interface
generic device: /dev/sga
ioctl device: /dev/scd0
CDROM sensed: MITSUMI CR-4802TE 2.1D
Checking for SCSI emulation and transport revision...
No SG_EMULATED_HOST ioctl(); Checking inquiry command...
Inquiry bytes: 0x05 0x80 0x02 0x21
Drive appears to be standard ATAPI
Checking for MMC style command set...
Drive is MMC style
004: Unable to read table of contents header
Unable to open disc. Is there an audio CD in the drive?
#bash
The last bit of cdparanoia's output is because there is no audio CD in
the drive at the moment :-)
--
Lew Pitcher
Master Codewright and JOAT-in-training