scsi 1:0:0:0: Direct-Access     ATA      WDC WD30EZRX-19D 81.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: Direct-Access     WD       My Passport 082A 1012 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 2:0:0:1: Enclosure         WD       SES Device       1012 PQ: 0 ANSI: 6
scsi 2:0:0:1: Attached scsi generic sg3 type 13
sd 2:0:0:0: [sdc] Spinning up disk...
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
.ready
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] 5860466688 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 47 00 10 08
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI disk
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 2982KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
Freeing unused kernel memory: 172K (c0468000 - c0493000)
Adding 292964k swap on /dev/sda1.  Priority:1 extents:1 across:292964k 
md: bind<sda2>
Adding 292964k swap on /dev/sdb1.  Priority:1 extents:1 across:292964k 
md: bind<sdb2>
md/raid:md0: device sdb2 operational as raid disk 1
md/raid:md0: device sda2 operational as raid disk 0
md/raid:md0: allocated 3198kB
md/raid:md0: raid level 5 active with 2 out of 3 devices, algorithm 2
RAID conf printout:
 --- level:5 rd:3 wd:2
 disk 0, o:1, dev:sda2
 disk 1, o:1, dev:sdb2
created bitmap (22 pages) for device md0
md0: bitmap initialized from disk: read 2 pages, set 31432 of 44708 bits
md0: detected capacity change from 0 to 6000585211904
 md0: unknown partition table
mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
usbcore: registered new interface driver usblp
mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
fuse init (API version 7.22)
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: unknown partition table
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: unknown partition table
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: unknown partition table
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: unknown partition table
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
sd 2:0:0:0: [sdc] No Caching mode page found
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
md: bind<sdc2>
RAID conf printout:
 --- level:5 rd:3 wd:2
 disk 0, o:1, dev:sda2
 disk 1, o:1, dev:sdb2
 disk 2, o:1, dev:sdc2
md: recovery of RAID array md0
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
md: using 128k window, over a total of 2929973248k.
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: device not accepting address 2, error -110
usb 1-1: reset high-speed USB device number 2 using orion-ehci
usb 1-1: device not accepting address 2, error -110
usb 1-1: USB disconnect, device number 2
sd 2:0:0:0: Device offlined - not ready after error recovery
sd 2:0:0:0: [sdc] Unhandled error code
sd 2:0:0:0: [sdc]  
Result: hostbyte=0x01 driverbyte=0x00
sd 2:0:0:0: [sdc] CDB: 
cdb[0]=0x8a: 8a 00 00 00 00 00 00 13 6b 98 00 00 00 f0 00 00
end_request: I/O error, dev sdc, sector 1272728
md/raid:md0: Disk failure on sdc2, disabling device.
md/raid:md0: Operation continuing on 2 devices.
md: super_written gets error=-5, uptodate=0
md: super_written gets error=-5, uptodate=0
sd 2:0:0:0: [sdc] Unhandled error code
sd 2:0:0:0: [sdc]  
Result: hostbyte=0x01 driverbyte=0x00
sd 2:0:0:0: [sdc] CDB: 
cdb[0]=0x8a: 8a 00 00 00 00 00 00 13 6c 88 00 00 00 80 00 00
end_request: I/O error, dev sdc, sector 1272968
usb 1-1: new high-speed USB device number 3 using orion-ehci
md: md0: recovery done.
RAID conf printout:
 --- level:5 rd:3 wd:2
 disk 0, o:1, dev:sda2
 disk 1, o:1, dev:sdb2
 disk 2, o:0, dev:sdc2
RAID conf printout:
 --- level:5 rd:3 wd:2
 disk 0, o:1, dev:sda2
 disk 1, o:1, dev:sdb2
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new high-speed USB device number 4 using orion-ehci
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new high-speed USB device number 5 using orion-ehci
usb 1-1: device not accepting address 5, error -110
usb 1-1: new high-speed USB device number 6 using orion-ehci
usb 1-1: device not accepting address 6, error -110
hub 1-0:1.0: unable to enumerate USB device on port 1