## Booting image at ff040000 ... Image Name: Alt-F-0.1RC3, kernel 2.6.35.14 Created: 2012-11-01 19:37:03 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1567140 Bytes = 1.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at ff1c0000 ... Image Name: Alt-F-0.1RC3, initramfs Created: 2012-11-01 3:01:41 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 5678057 Bytes = 5.4 MB Load Address: 00800000 Entry Point: 00800000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.35.14 (matt@thumpbumper) (gcc version 4.3.3 (GCC) ) #2 Thu Nov 1 13:36:46 MDT 2012 CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 CPU: VIVT data cache, VIVT instruction cache Machine: D-Link DNS-323 Clearing invalid memory bank 0KB@0x00000000 Clearing invalid memory bank 0KB@0x00000000 Clearing invalid memory bank 0KB@0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x41000403 Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 56292k/56292k available, 9244k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc4800000 - 0xfd800000 ( 912 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0026000 ( 120 kB) .text : 0xc0026000 - 0xc02d2000 (2736 kB) .data : 0xc02ea000 - 0xc02ffba0 ( 87 kB) NR_IRQS:64 Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200) pid_max: default: 4096 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Orion ID: MV88F5182-A2. TCLK=166666667. DNS-323: Identified HW revision C1 DNS-323: Failed to read MAC address bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource orion_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 5544K squashfs: version 4.0 (2009/01/31) Phillip Lougher aufs 2-standalone.tree-35-20100809 msgmni has been set to 120 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A console [ttyS0] enabled loop: module loaded sata_mv sata_mv.0: version 1.28 sata_mv sata_mv.0: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 29 ata2: SATA max UDMA/133 irq 29 physmap platform flash device: 01000000 at f4000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition information Creating 6 MTD partitions on "physmap-flash.0": 0x000000000000-0x000000020000 : "MTD1" 0x000000020000-0x000000040000 : "MTD2" 0x000000040000-0x0000001c0000 : "Linux Kernel" 0x0000001c0000-0x000000bc0000 : "File System" 0x000000f80000-0x000001000000 : "u-boot" 0x000000bc0000-0x000000f80000 : "Module" MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed net eth0: port 0 with MAC address 00:00:00:00:51:81 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: gpio-keys as /class/input/input0 i2c /dev entries driver rtc-m41t80 0-0068: chip found, driver version 0.05 rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0 lm75 0-0048: hwmon0: sensor 'lm75' md: linear personality registered for level -1 md: raid1 personality registered for level 1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 rtc-m41t80 0-0068: setting system clock to 2012-11-01 12:53:13 UTC (1351774393) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: WDC WD800JD-08LSA0, 07.01D07, max UDMA/133 ata1.00: 156312576 sectors, multi 0: LBA48 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-08LS 07.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda4 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link down (SStatus 0 SControl 300) Freeing init memory: 120K pre-init started, pid=1 pre-init: aufs init started: BusyBox v1.19.3 (2012-10-31 17:29:47 MDT) root: Board: C1 root: Firmware: Alt-F-0.1RC3, kernel 2.6.35.14 root: fsck 1.41.14 (22-Dec-2010) fsck.minix: BusyBox v1.19.3 (2012-10-31 17:29:47 MDT) /dev/mtdblock0 is clean, check is skipped Empty or no file found! root: FIXME: Waiting 3 sec for kernel enumeration to finish... root: FIXME: stop waiting. Adding 530108k swap on /dev/sda1. Priority:1 extents:1 across:530108k root: IP from sib.conf sed: /etc/resolv.conf: No such file or directory root: Starting syslogd: OK. Starting klogd: OK. eth0: link up, 1000 Mb/s, full duplex, flow control disabled root: Starting sslcert: Creating SSL self-signed certificate... OK. root: Starting urandom: OK. root: Starting sysctrl: OK. usbcore: registered new interface driver usblp /etc/init.d/S41inetd: line 79: rcstunnel: not found root: dropbear: generating rsa key... dropbear: generating dsa key... Starting inetd: OK. root: Starting user: OK.