** MARVELL BOARD: RD-88F5182-NAS-2 LE U-Boot 1.1.1 (Oct 12 2007 - 17:19:14) Marvell version: 1.7.3.001 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [8192kB@ff800000] Flash: 8 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done *** Warning - bad CRC, using default environment Soc: MV88F5182 Rev 2 CPU: ARM926 (Rev 0) running @ 500Mhz SysClock = 166Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 33000000 Hit any key to stop autoboot: 0 ## Booting image at ff820000 ... Image Name: Alt-F-0.1RC5, kernel 3.18.28 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1561560 Bytes = 1.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at ff9a0000 ... Image Name: Alt-F-0.1RC3, initrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 6385664 Bytes = 6.1 MB Load Address: 00800000 Entry Point: 00800000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.18.28 (jcard@silver) (gcc version 4.3.3 (GCC) ) #1 Thu Jun 16 15:55:06 WEST 2016 CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f CPU: VIVT data cache, VIVT instruction cache Machine: D-Link DNS-321/323 Clearing invalid memory bank 0KB@0xffffffff Clearing invalid memory bank 0KB@0xffffffff Clearing invalid memory bank 0KB@0xffffffff Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x41000403 bootconsole [earlycon0] enabled Memory policy: Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS0,115200 root=/dev/ram0 init=/init earlyprintk root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 54296K/65536K available (3447K kernel code, 143K rwdata, 540K rodata, 156K init, 84K bss, 11240K reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xc4800000 - 0xff000000 ( 936 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc03ecf54 (3988 kB) .init : 0xc03ed000 - 0xc0414000 ( 156 kB) .data : 0xc0414000 - 0xc0437cc0 ( 144 kB) .bss : 0xc0437cc0 - 0xc044cf7c ( 85 kB) NR_IRQS:65 sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) pid_max: default: 4096 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok Setting up static identity map for 0x364460 - 0x36449c xor: measuring software checksum speed arm4regs : 386.000 MB/sec 8regs : 336.400 MB/sec 32regs : 303.200 MB/sec xor: using function: arm4regs (386.000 MB/sec) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations Orion ID: MV88F5182-A2. TCLK=166666667. DNS-321/323: Identified HW revision B1 DNS-321/323: Found ethernet MAC address: 00:22:b0:0c:44:54. raid6: int32x1 20 MB/s raid6: int32x2 30 MB/s raid6: int32x4 39 MB/s raid6: int32x8 34 MB/s raid6: using algorithm int32x4 (39 MB/s) raid6: using intx1 recovery algorithm SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switched to clocksource orion_clocksource NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (junk in compressed archive); looks like an initrd Freeing initrd memory: 6236K (c0800000 - c0e17000) futex hash table entries: 16 (order: -5, 192 bytes) VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.23) aufs 3.18.25+-20160301 msgmni has been set to 118 async_tx: api initialized (async) io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled console [ttyS0] disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 4, base_baud = 10416666) is a 16550A console [ttyS0] enabled console [ttyS0] enabled bootconsole [earlycon0] disabled bootconsole [earlycon0] disabled brd: module loaded loop: module loaded sata_mv sata_mv.0: cannot get optional clkdev sata_mv sata_mv.0: slots 32 ports 2 scsi host0: sata_mv scsi host1: sata_mv ata1: SATA max UDMA/133 irq 30 ata2: SATA max UDMA/133 irq 30 physmap platform flash device: 00800000 at f4000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 Amd/Fujitsu Extended Query Table at 0x0040 Amd/Fujitsu Extended Query version 1.3. number of CFI chips: 1 Creating 5 MTD partitions on "physmap-flash.0": 0x000000000000-0x000000010000 : "MTD1" 0x000000010000-0x000000020000 : "MTD2" 0x000000020000-0x0000001a0000 : "Linux Kernel" 0x0000001a0000-0x0000007d0000 : "File System" 0x0000007d0000-0x000000800000 : "u-boot" libphy: orion_mdio_bus: probed mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:22:b0:0c:44:54 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-orion: EHCI orion driver orion-ehci orion-ehci.0: EHCI Host Controller orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 18, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage i2c /dev entries driver rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0 lm75 0-0048: hwmon1: sensor 'lm75' md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 input: gpio-keys as /devices/platform/gpio-keys/input/input0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133 ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133 ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 1:0:0:0: [sdb] 4096-byte physical blocks sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: [sdb] Attached SCSI disk md: Skipping autodetection of RAID arrays. (raid=autodetect will force) RAMDISK: squashfs filesystem found at block 0 RAMDISK: Loading 6233KiB [1 disk] into ram disk... done. squashfs: SQUASHFS error: Filesystem uses "lzma" compression. This is not supported List of all partitions: 1f00 64 mtdblock0 (driver?) 1f01 64 mtdblock1 (driver?) 1f02 1536 mtdblock2 (driver?) 1f03 6336 mtdblock3 (driver?) 1f04 192 mtdblock4 (driver?) 0800 2930266584 sda driver: sd 0801 524288 sda1 283e18f3-7813-4d28-a330-8e52aa33faae 0802 2929741272 sda2 744e8b9d-b77f-48b8-8158-f68fa294bfd6 0810 2930266584 sdb driver: sd 0811 524288 sdb1 ce7d3276-e78f-4fd4-8a97-e18474412514 0812 2929741272 sdb2 62e574d6-71bb-42a9-94c1-bdcebdccab46 No filesystem could mount root, tried: ext3 ext2 ext4 squashfs minix vfat msdos fuseblk Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) random: nonblocking pool is initialized