Bulldog Safe Reset Code

[Auriville Cha]

Forthose that own a Bulldog Mechanical Lock gun safe, what is the pattern of the code to open the safe? Sorry, I don't have the model of the safe but would presume all models have the same combination pattern

The brother of my friend Swiss Oscar who passed on has the combination numbers and has tried multiple sequences many times to open 2 Bulldog safes that Swiss Oscar has with total failure. Any help would be greatly appreciated.

The Sargent & Greenleaf combinations on my two are similar to what Blackfoot described , but in the opposite directions. They are turned counter-clockwise for a few turns to clear , and stop on the first number. Then turn clockwise past that number and stopping on the second number the third time it appears , then counterclockwise past that number and stopping on third number , then clockwise to the zero and a little past the zero you can feel the tumblers lining up. On mine the dial stops at about 85 ,then the handle will open.

There should be a "safe cracker" in the area that can do it. BullDog may be able to put you in contact; right after I bought my AmSec about 15 years ago, I had trouble with the combo and they sent a "tech" out to crack it...he was in my house less than 15 minutes and 10 of it was talking (scary)! Good luck!

So, I call the website number for Bulldog Tuff Safes. The man answers, I explain the issue and tells me 'I don't know who makes Bulldog safes!" Anyway, here's the next sequence to try that he said most of the lock companies use:

Well most lock companies, at least the ones I've used, say left (or right)past the first number twice and then stop on it the third time around , then the opposite way past the next number and stop on it the second time, then the opposite direction to the third number, stopping on it the first time.

Have you tried the numbers in reverse order? Given my ability to forget PIN numbers, combination lock, trigger lock and safe numbers I have them written down but in reverse order in case someone sees the list cunningly hidden in plain sight on my loading bench.

For FYI...The first set of turns is used to get all 3 wheels "picked up" and aligned (three wheels, three turns) then the last (fourth) turn rotates them together. Since the start is all about getting the wheel pack aligned and rotating as a unit it can be 4 turns or 400 turns so long as you stop at the correct number then reverse direction only the three (3) turns.

It is important to try this step first, even if your keypad beeps and lights up as normal. There may be enough power in the batteries to operate the keypad, but not enough to completely retract the boltwork.

Many safes go into penalty lockout mode if too many wrong codes are entered. Depending on the type of keypad, it typically emits a rapid series of beeps. If this happens, wait 10 to 20 minutes, and try again.

Steve,

If it has a mechanical lock (No buttons or keypad but has a mechanical 100 number dial) on it turn the dial five complete rotations in either direction. Next, turn the dial counterclockwise (left) three revolutions and stop with the first number comes to the index mark on the fourth rotation.

Turn the dial clockwise (right) passing the second number twice and stop when it comes to the index mark on the third revolution.

Turn the dial counterclockwise (left) passing the third number once and stop when it comes to the index mark on the second revolution.

Now turn the dial clockwise (right) and the dial should come to a dead stop.

you should then be able to turn the handle of your safe and open your door.

I suggest contacting the manufacturer of your safe to see if there is a manufacturer approved troubleshooting document available or if your safe is still under warranty.

It may be that there is debris in your lock and could be as simple as vacuuming the keyway out to clean out debris. If there is a lock failure, you will need to locate a reputable safe technician in your area.

Safe technicians can be found searched for at , , or

Richard,

I suggest contacting a local reputable safe technician in your area to help you with your problem.

You can do so by checking or and using their search tools, should be able to find someone near you able to help.

Hi,

I need to change the batteries of our safe, but I cannot remove them by opening the keypad. Seems they need to be replaced from inside the door.It is a Fier Fyter from Costco. Should I call a technician or is there an easier solution?

Thanks for your help!

Elsa

Elsa,

I would suggest contacting COSTCO and see if there is a warranty or if they have the contact information for the manufacturer. You may also want to go to or and using their search tools, should be able to find someone near you able to help.

I called stack on customer service and they walked me through the problem. The black piece on the motherboard was loose which causes only one Or two buttons to work. They sent me all new parts for free and works perfect. I would just call them and they will help u out.

Thanks alot. I lef it alone awhile after messing with the wires and it wasnt doing anything and went back about an hour later now its fine. I guess it was a loose connection and it needed time to reset lol. Glad it also came with keys.

Also, there is a motherboard inside the safe so u would have to open the safe to even get to the motherboard. Check all the connections and pull out the ribbon from the key pad from the circuit board and then plug it back in. Usually comes loose

Call the company is the best option you have and have then figure it out. Always try the battery and unplug what u can and reset it. If not call the company and they could either send somebody to help u out or even send u new parts to get in the safe

I have a Patriot safe that I bought from a guy that buys Estate sales. He did not have the keys nor the numbers for the key pad.so I got it for a great price. Well after getting it home I find out Patriot Safes are out of buisness now. What do I do?

works with leading chain establishments, property managers, access control integrators, and general contractors to make doors and locks one less thing they need to worry about.

2017 LockNet. All rights reserved.

It also includes a digital lock with a keypad to enable access only when the owner has the correct code. The interior has adjustable shelves and other storage compartments for ammunition and accessories.

Even if nothing out of the ordinary has happened, it can still be wise to occasionally change up safety measures such as combinations. By changing combinations regularly, you can give yourself added peace of mind that all valuables stay secure.

It is important to figure out the type of gun safe you own, as some models require different methods to reset. The type of your gun safe should be listed in the manual. You can contact the manufacturer directly to find out what type you have.

After opening the gun safe, locate the reset button. This should be inside the safe near where you enter your combination code. This is usually marked with a red triangle or circle on most electronic safes.

Press and hold down the reset button for several seconds until a light illuminates. This indicates that it is ready for a new combination code to be entered. Most safes require that both buttons be held simultaneously for five seconds until all indicator lights are lit.

Enter your chosen four-digit numerical combination by pressing each number separately. Once finished, press and hold both buttons until they illuminate, confirming that it has been accepted as your new combination code.

A gun safe is typically a box made of steel or other materials with a locking mechanism to secure firearms and ammunition. A gun vault is typically a fortified room with multiple layers of security designed to store guns securely.

Hey, I'm Larry B. Smith, the guy behind Rainier Ballistics. From a lifelong love of firearms, I've become a recognized authority in the field. As the main contributor, I share insights for all shooters, connecting technical know-how with the everyday experiences of gun enthusiasts. Let's explore the world of firearms together!

If you purchased your safe at low cost online or from a large chain retail outlet, then it is likely to be this type of electronic safe and will have a lock similar to the one in the image above. Your safe will have come with a separate key which can be used to open the safe if the electronic lock fails or the batteries run down. Override keys should not be stored inside the safe.

These higher end locks have the batteries concealed within the keypads with access to the battery even if the safe is locked (often from below, or the keypad will tilt forward to reveal the batteries). If the battery is running low on a safe with this type of lock, you will get a warning. This maybe beeps when you input your code or, if you have a display panel, it may show a low battery warning similar to that you would see on a mobile phone.

Locks like the one in the image above have an external emergency battery connection point on the keypad. The actual battery housing is inside the safe on the back of the door and inaccessible from the outside when the safe is locked.

Safes can become stuck shut for a variety of reasons, not just the batteries. Whatever the issue preventing you from opening your safe, our engineers will quickly diagnose the problem and determine the options for opening it.

Bulldog pushmatic breakers are very old. The breakers have an internal grease lubricant, and can become difficult to operate, if not used and maintained regularly. Pushmatic breakers have an indicator flag meant to show whether the circuit is on or off. This flag would sometime stay stuck in position, giving a false indication of the circuit condition. The flag fails inside the breaker, making it difficult to know its condition. This can allow for shock/electrocution, even when working on a circuit you believe to be turned off.

3a8082e126