Is cc2530 via CP2102 USB to UART bridge controller supported ?

[Akash Ashok]

Hi All,

I have a board which has cc2530 connected via USB using CP2102 USB to UART bridge controller. Is Zigbee for Java compatible for this configuration? Will this work the same as cc2531 dongle ?

Cheers,

Akash A

[Akash Ashok]

I actually tried executing this Here are the steps I followed

1. Flash the cc2530 with CC2530ZNP-Pro-Secure_Standard.hex

2. Ran ZigBeeConsoleJavaSE and the output is pasted below

ZigBee API starting up...04:10:02 285  INFO   Using RESEND_TIMEOUT set as DEFAULT 1000

04:10:02 287  INFO   Using TIMEOUT set as DEFAULT 8000ms

04:10:02 287  INFO   Using RESET_TIMEOUT set as DEFAULT 60000ms

04:10:02 287  INFO   Using STARTUP_TIMEOUT set as DEFAULT 5000ms

04:10:02 287  INFO   Using RESEND_MAX_RETRY set as DEFAULT 3

04:10:02 287  INFO   Using RESEND_MAX_RETRY set as DEFAULT 3

04:10:03 875  INFO   Initializing hardware.

04:10:03 875  INFO   CREATED -> HARDWARE_INITIALIZING

04:10:03 930  INFO   Serial ports:

04:10:03 931  INFO   0) 'COM3': Silabser0

04:10:04 682  INFO   Creating ZToolPacketParser

04:10:04 682  INFO   Provided InputStream class j.extensions.comm.SerialComm$SerialCommInputStream doesn't provide the mark()/reset() feature, wrapping it up as BufferedInputStream

04:10:04 683  INFO   HARDWARE_INITIALIZING -> HARDWARE_OPEN

04:10:04 683  INFO   ZToolPacketParser parserThread started

04:10:04 683  INFO   Waiting for asynchronous response message 16768.

04:11:04 752  INFO   Timeout 60000 expired and no packet with 16768 received

04:11:04 752  ERROR  Unable to reset dongle

04:11:04 752  INFO   Closing HARDWARE

04:11:04 757  INFO   HARDWARE_OPEN -> CREATED

04:11:04 757  INFO   CREATED -> CLOSED

04:11:04 757  INFO   Initializing network.

04:11:04 757  INFO   CLOSED -> NETWORK_INITIALIZING

04:11:04 757  INFO   Setting clean state.

04:11:04 757  INFO   ZB_WRITE_CONFIGURATION sending as synchronous command.

04:11:04 788  INFO   Put synchronousCommandListeners listener for 1541 command

04:11:04 788  INFO   Sending SynchrounsCommand Packet: length = 3, apiId = 0x26 0x05, full data = 0xfe 0x03 0x26 0x05 0x03 0x01 0x03 0x21, checksum = 0x21, error = false, errorMessage = null 

04:11:04 788  INFO   ZB_WRITE_CONFIGURATION sent (synchronous command, retry: 1).

04:11:04 788  INFO   Waiting for synchronous command up to 1000ms till 1448280665788 Unixtime

04:11:05 788  WARN   ZB_WRITE_CONFIGURATION executed and timed out while waiting for response.

04:11:05 795  WARN   Couldn't set ZCD_NV_STARTUP_OPTION mask 00000003

04:11:05 795  ERROR  Unable to set clean state for dongle

04:11:05 795  INFO   Closing HARDWARE

04:11:05 795  INFO   NETWORK_INITIALIZING -> CREATED

04:11:05 795  INFO   CREATED -> CLOSED

ZigBee API starting up ... [FAIL]

[Akash Ashok]

Closing this as the documents says it only works with cc2531.