Zen-Kernel with Archlinux
283 views
Skip to first unread message
Dennis Börm
Feb 21, 2012, 6:06:13 AM2/21/12
to zen_k...@googlegroups.com
Hi
i'm trying to compile the zen-kernel under archlinux. i get the
following error message:
No rule to make target
`/media/ram/linux-zen/pkg/linux-zen/lib/firmware/./', needed by
`/media/ram/linux-zen/pkg/linux-zen/lib/firmware/atmsar11.fw'. Stop.
i'm using the archlinux config with activated BFS, TuxOnIce.
greets,
Dennis
Marc O'Connor
Feb 21, 2012, 9:02:56 AM2/21/12
to zen_k...@googlegroups.com
Dennis,
Are you using git or something else? I use zen on Arch with git and I have not come across that.
Dennis Börm
Feb 21, 2012, 9:09:07 AM2/21/12
to zen_k...@googlegroups.com
Marc O'Connor
Feb 21, 2012, 9:25:11 AM2/21/12
to zen_k...@googlegroups.com
I have to be honest, unless I am working from git I am a bit lost. But that firmware is for a Madge Network Collage 155 PCI ATM card I thnink. Can you go into the .config and disabled it there and try again?
Dennis Börm
Feb 21, 2012, 10:41:27 AM2/21/12
to zen_k...@googlegroups.com
i didn't find anything with "madge network", "collage" or something else
Dennis Börm
Feb 21, 2012, 10:46:09 AM2/21/12
to zen_k...@googlegroups.com
On 02/21/2012 04:41 PM, Dennis Börm wrote:
> i didn't find anything with "madge network", "collage" or something else
> i didn't find anything with "madge network", "collage" or something else
i think its a "Madge Ambassador (Collage PCI 155 Server)"
Dennis Börm
Feb 21, 2012, 10:50:27 AM2/21/12
to zen_k...@googlegroups.com
without the "Madge Ambassador (Collage PCI 155 Server)" module, it
compiles and get packaged without any errors.
compiles and get packaged without any errors.
thx
Marc O'Connor
Feb 21, 2012, 10:51:42 AM2/21/12
to zen_k...@googlegroups.com
Have fun...this was an issue on Gentoo's genkernel as well a while back.
Marc O'Connor
Feb 21, 2012, 10:49:03 AM2/21/12
to zen_k...@googlegroups.com
Try disabling it in menuconfig and recompiling.
Reply all
Reply to author
Forward
0 new messages