anschan antuwain napoleane

0 views

Skip to first unread message

Regenia Junke

unread,

Aug 2, 2024, 4:27:10 AM8/2/24

to zahgidemas

Hi guys. The Microsoft Edge is my favorite browser of all times, really, but not when I try to watch netflix or other video streaming services, it always breaks, I have no ideia what to do anymore. Always when I try to play something there's an error and then I need to reload over and over again, sometimes even when I just play the video it stop working when I try to play again. Help me to keep using this best browser that I've ever seen.

I've ever tried to disable hardware acceleration, enable DRM content, install Microsoft Silverlight and a lot of other things, but I didn't get to watch so far without an error I keep receiving these error codes: D7356-7701 and others related. Is there's still something that can be done to really fix theses erros or I just have to be patient and wait for news versions of the browser?

When my last SD card died, I installed the latest LibreELEC build "Latest Stable Version (2022.03)" with "Kodi 19.4". However, I wasn't able to get access to my NAS using SMB 2 - it just refused to connect.

Nightlies are in an alpha state, but crowdsourced bug reporting normally catches anythibng major quickly so they're not extreme. The netflix issue should be resolved (add-on author was publishing fixes).

I can access my Netflix account via my computer and can stream to my Xbox and other laptops. I've been on the phone three different times with Netflix tech support and they're telling me it's currently a "known issue" with iPads - but there's no ETA and and I'm not seeing any other reports of this on other forums.

My iphone will not work on Netflix through WIFI but will work on Cellular Data and iCloud only works through Cellular Data... I am thinking it a particular problem with the Internet network iam using (in this case it is DEKAL WIRELESS in Jamaica).

Oops! update, i purposely type in wrong password to see if it would give me another connection error message, but it gave me wrong password message. When I eventually typed in correct password, it finally let me in with no connect error message. **** technology! Either its a temporary issue, or a gremlin in the works.

I think I've got this one. I noticed the same problem on my iPad 3. It was also happening on my android phone which is the brand new S4 (sorry apple). Anyway - My MacBook Pro streems fine so I shut the wifi off on my phone and used the 4G network and Netflix came through fine on my phone. THAT'S IT! It was a network connectivity issue, the app works fine and the computer works fine the only thing left is how they communicate. The odd thing was that I could get any other website on my ipad or my phone using wifi but not neflix. What I ended up doing was going to the wifi settings on my ipad, clicked the little arrow that points to the right (next to the network I was connected to) a window popped up with a button that read, "renew lease" (which renews your devices connection to the router) and presto chango everything was cool... hopefully it works for my phone too becasue I pay for data on the 4g network ?

Just fixed the issue on my mom's iPad that only supports the 5.1.1 version. What you need to do is go to SETTINGS>GENERAL>RESET>RESET NETWORK SETTINGS. It will restart your iPad/iPhone/iPod and you need to log on to your wi-fi again and voila ! You can sign back into your netflix account (input the username And password). This will not change anything else on your device !!!

I know that this is 2015 now so hopefully you have resolved your problem! But I came across your question because the Netflix app was not working on my daughter's brand new iPad Mini 2. All I did was uncheck "VPN" and turn off Bluetooth. Everything worked fine! Hope this helps someone!

After trying everything else, this splatoon worked a treat for me. I think something must have happened to the connection when I had unplugged my router while moving furniture And it somehow upset the wifi connection with Netflix on the iPad (all other apps and connection worked fine) simple network reset was all that was needed.

I hate to post on such an old thread but I had the same behavior today after changing my Netflix password. I use a password manager which generates 16 character passwords for me using letters, numbers, and special characters. This generated password happened to have a double quote " in it.

The changed password worked on 2 Xboxes, 2 PC's, a Note 4, and Kindle Fire HDX. However, both iPad Air 2's in my house stopped working immediately. I tried everything I could find including an IP release/renew, resetting to factory network settings, rebooting the router/modem, reinstalling the app, rebooting the tablets, etc.

All along my wife is saying "maybe it doesn't like those special characters" to which I replied something along the lines of "that's stupid I'm a software developer and there's no way it's that simple, it would be bulls**t if that's what it was..."

The likely reason is un acknowledged packets. TCP/IP requires that every packet be acknowleged, but it doesn't require it to happen immediately. At very high transmission rates such as FIOS provides, any delay in ackowledging a packet or delay in re-transmitting a packet may cause the router memory to fill up with subsequent packets, creating the proverbial Gordian knot. You cannot get rid of packets in memory because they haven't been acknowledged, but you cannot get any more acknowledgements, because there is no memory left in the router to receive them! I suspect this is a situation the router doesn't handle gracefully.

If it does, then you have a stressed line problem that only occurs when the line is close to saturated, which is a common problem with lines that are marginal, and would probably require a trouble ticket.

You may also have a issue with fios itself, because you are streaming video you can see it where as if your just going to websites you will not see a network hiccup. I stream netflix all the time with no issues. I highly doubt it is a issue of the router running out of memory, because your router does not store what you are downloading, it is just routing on the packets of info onto the correct mac address that requested the info from the website., it does not buffer them.

I still think it is the router running out of memory. Contrary to what others have said, the router does have to store packets. It is just like any other node on a TCP/IP network. It has to hold onto the packet until the next node up the line has ack'ed sucessful receipt. TCP/IP does require that every sent packet be acknowledge, but to deal effectively with high speed transmission, and long propogation time, it can send the next packet, in fact it can keep on sending packets until the packet is ack'd. The packets do have to be ack'd in order, but It can take a long time. The obvious problem is at very high transmission rates, delays in ack of even due to just propagation delay can chew up a lot of memory in the router. The faster you make the connection, the faster the router will run out of memory, so making the connection faster will make matters worse.

While it is configured that way, some other things may not work, but if the netflix streaming video works without the router, there is your answer. The PC has far more memory available for packets than the router. so is far more tolerant of long delayed acks.

I'm having same issue, waited my 30 minutes with Netflix support and that said "no idea" and that they are working on buffering issue. Has anyone got past this yet? Very frustrating and wonder what is up w/router to just drop like that?

how did you access the ONT outside? all locked up? but after doing so you ran cat 5 cable for that to the inside to a wireless router and use that for internet and leave the actiontec in place for the TV side? did you disable anything in actiontec?

In terms of getting this done with Verizon Tech Support, we need more detail, they are stingy with helping anymore. what number did you call and what was the wording you used? i'm guessing they will say not suppoted so get lost.

I installed Sophos XG about 3 weeks back. Until last Thursday I had no problems with the device. I haven't had a chance to dive in and tweak it to better protect my home network but that is for a different discussion. Right now my problem is the inability to use Netflix. It started Thursday night and I just assumed it was the internet or Netflix having issues so I just went to bed. Friday it was giving me the same error. It will login to Netflix (on any of my tv's, xboxes, blu-ray players, ect) with no issues but when you click play it says it can not play this title right now. If I plug in my cheep Belkin router everything works great.

Please remember I am new to the sophos interface and am still learning. Is there a way I can exclude netflix traffic from any sort of filtering?? I usually consider my self pretty good with technology but the way sophos is setup I can't find the correct place to put an exclusion.

I put the netflix rule at the top, so that it triggered before the general rule. Web log shows direct hits to IPs rather than domains, I wonder if things are different because I'm in Canada? I know Netflix has different content for each country, but I'm not sure how their network infrastructure plays out to assist that. Here's a screenshot of the web log for the Roku device (works if I turn off web filtering, of course):

I noticed that the /24 shown above (209.148.214.0/24) is owned by my ISP (Rogers, one of the big three in Canada) - I added that IP range to the netflix rule and things are now working. It appears my ISP is playing a little DNS magic with connections to Netflix.

Netflix doesn't work - error "NW-2-5" (network issues) - started about four or five days ago.
When the TV's DNS is manually set to 8.8.8.8 Netflix works, set back to 192.168.20.254 (pihole) it stops.
BUT Netflix works on ALL other devices that go through the Pihole...?? PC, phones, Xbox... they all work, except the TV.

OK here's something weird. To try and narrow down the issue a little I went to the blocklists page in the console and unchecked ALL the lists, planning to enable them one-by-one to see which one is doing it.