Z80SoC in Altera DE2-155

[Antonio E. Martínez]

Hello. I have recompiled Z80SoC code for DE1 to run in an Altera DE2-155 board, and the compilation seems to be succesful.

However, I have not found information about what to do once the project is downloaded to the board... It seems the project has the contents to fill the memories and start the system, but after downloading only led ligths and no other feedback is produced.

Any help will be welcome.

Best regards,
Antonio.

[Roni]

Hi.

I believe there is info on how it works, and what it is supposed to do.

Try connecting the board to a VGA monitor and keyboard.

:=)

[Antonio E. Martínez]

Of course, I did it... But nothing was displayed on the VGA and no response pressing keys... That's why I asked for help...

[Rafael Luiz]

I just downloaded Z80SoC and tried to make it work on a DE2 board. I have changed pin assignments and other stuff, but with the same problem as Martinéz. I'll try to do this work during this month, and any help would be appreciated.

[Ronivon Costa]

This release was suposed to work without problems.
Maybe the issue is with the memory cores. Different versions of the altera software might require de memory to be regenerated.

I will look at it and see how I can give some support for you to get it running.

On 9 Dec 2015 13:47, "Rafael Luiz" <cancian...@gmail.com> wrote:

I just downloaded Z80SoC and tried to make it work on a DE2 board. I have changed pin assignments and other stuff, but with the same problem as Martinéz. I'll try to do this work during this month, and any help would be appreciated.

--
You received this message because you are subscribed to the Google Groups "Z80SoC" group.
To unsubscribe from this group and stop receiving emails from it, send an email to z80soc+un...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.