Gruß
Stefan
Longshines 10/100m Mbps Desktop Fast Ethernet Switch LCS-883R-SW500M+
The Longshine LCS-883R-SW500M Ethernet switch is a powerful,
high-performance Fast Ethernet switching Hub, with all 5 ports capable of 10
or 100Mbps auto-negotiation operation (N-Way) which means the switch could
automatically negotiate with the connected partners on the network speed and
duplex mode. It is ideal for micro-segmenting large networks into smaller,
connected subnets for improved performance, enabling the bandwidth demanding
multimedia and imaging applications. Moreover, the 10/100 Mbps auto-sensing
ability provides an easy way to migrate 10Mbps to 100Mbps network with no
pain. Compared to the shared 10Mbps or 100Mbps networks, the switching hub
delivers a dedicated 10/100mbps connection to every attached client with no
bandwidth congestion issue.
Store-and-forward switching mode promises the low latency plus eliminates
all the network errors, including runt and CRC error packets. To work under
full-duplex mode, transmission and reception of the frames can occur
simultaneously without causing collisions as well as double the network
bandwidth.
The switching hub is plug-n-play without any software to configure and also
fully compliant with all kinds of network protocols. Moreover, the rich
diagnostic LEDs on the front-panel for providing the operating status of
individual port and whole system.
Key Features
Complies with IEEE 802.3 and IEEE 802.3u standards
Eight 100Base-TX/10Base-T dual speed RJ-45 ports for Fast Ethernet and
Ethernet connectivity
Supports Nway protocol for speed (10/100Mbps) and duplex mode (Half/Full)
auto-detection
One uplink port for cascading switch to switch or switch to hub with no
cross-over cable
Desktop Black Metall case
Supports full duplex or half duplex operation on all ports
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error packets
Supports 1K MAC address entries in whole system
1Mbytes buffer memory
Supports extensive LED indicators for network diagnostics
Provides external power supply for 100-240 VAC, 5V 2A
FCC, CE, VCCI, UL, CSA and TÜV certification
PRODUCT SPECIFICATION
Standard
IEEE 802.3 and IEEE 802.3u standards
Interface
RJ-45 x 5 Nway switching ports, One uplink port (an alternative to port 1)
Cable Connections
RJ-45 (10Base-T): UTP Category 3,4,5
RJ-45 (100Base-TX): UTP Category 5
Network Data Rate
Auto-negotiation (10Mbps, 100Mbps)
Transmission Mode
Auto-negotiation (Full-Duplex, Half-Duplex)
Sytem Buffer Memory
1MByte
MAC address Table
1K entries
Filtering/Forwarding Rate
10Mbps: 14.880pps/14.880pps
100Mbps: 148.800pps/148.800pps
LED indicators
Power, Link/Activity, Full duplex/Collision, Speed
Emission/Safety
FCC, CE, VCCI, UL, CSA, TÜV
Operating Temperature
0° C - 55° C
Operating Humidity
10% - 90% (non-condensing)
Dimensions
146 x 116 x 30 mm
Da ich mir das feine Teilchen geleistet habe und auch schon als echten Swich
eingesetzt hatte kann ich dir sagen:
JAP, ist ein echter Switch! Und ein günstiger dazu!
Gruss
Frank
"Stefan Kalinowski" <stefan.k...@surf-callino.de> schrieb im
Newsbeitrag news:3a35d...@news.arcor-ip.de...
Kostet bei comtech (nur online-Bestellung, bei Filialen musst du extra
nachfragen, das läuft irgendwie getrennt bei denen!?) 159.-DM.+Porto 14.-DM
(glaub ich, mehr wars auf keinen Fall)
Ich habs mittags um 12 online bestellt und am nächsten morgen wars um 9 da-
Wahninn, was?
> Was kostet der denn und wo bekommt man den her? Ein Switch kann doch
> immer
> 10MBit und 100MBit gleichzeitig, oder?
Jap!
(Ich will ein ADSL-Modem
> anschließen
> und das restliche Netz soll dann nicht auf 10MBit runtergeschalten
> werden)
>
Mit ADSL kenn ich mich überhaupt nicht aus, war hier auch schon ein paarmal
in der NG, such doch mal in der NG nach ADSL.
Gruss
Frank
Gruss
Frank
"Frank Cramer" <crfr...@fh-karlsruhe.de> schrieb im Newsbeitrag
news:3a364c21$0$8790$4dbe...@businessnews.de.uu.net...