Vspe - Virtual Serial Ports Emulator 64 Bit
Gaye Shine
VSPE is intended to help software engineers and developers to create/debug/test applications that use serial ports. It is able to create various virtual devices to transmit/receive data. Unlike regular serial ports, virtual devices have special capabilities: for example, the same device can be opened more than once by different applications, that can be useful in many cases. With VSPE you are able to share physical serial port data for several applications, expose serial port to local network (via TCP protocol), create virtual serial port device pairs and so on.
Hi again,
I found the ELAD documentation about getting SW2 to talk to CWSkimmer and also FLDIGI. First step was to download and use Eterlogic virtual serial ports emulator.
It had me create Com10 as a "connector" and Com11 as a splitter. Well all that worked in regards to using Com10 as the CAT control for CWSkimmer, the VFO talked fine.
However, in the Audio setup of SW2 I don't see any virtual connector available, created with the Virtual Serial ports emulator. In fact in looking at the Windows10 sound device manager and they aren't there either.
I'm assuming the virtual was necessary to share comm ports. Anybody else doing this and successfully according to the "ELAD Application Notes AN-002".
Thanks and 73,
Patrick KM5L
However, in the Audio setup of SW2 I don't see any virtual connector available, created with the Virtual Serial ports emulator. In fact in looking at the Windows10 sound device manager and they aren't there either.
You never thought about what was going on? Why assign ports at random? You need to apply some logic here, and maybe refer to documentation supplied. The path of signals must be Device port to FSUIPC, virtual port out of FSUIPC into a virtual port on SerialFP2. Please please please review the documentation I provided, which is replete with diagrams explaining all this!
Vi Initialisation COMs.vi create a "pair" : two virtual COM ports (COM12 & COM13) are created, and virtualy linked.
When you write in one, the second receive datas, and when you write in second, the first receive datas.
VSPE is intended to help software engineers and developers to create/debug/test applications that use serial ports. It is able to create various virtual devices to transmit/receive data. Unlike regular serial ports, virtual devices have special capabilities: the same device can be opened more than once. Using VSPE you can share physical serial port data between several programs, create virtual pipes and so on. Version 0.865 includes unspecified updates.
It provides pairs of virtual COM ports that are linked via a nullmodem connetion. You can then use your favorite terminal application or whatever you like to send data to one COM port and recieve from the other one.
Virtual Serial Port Driver is a software package developed by Electronic Team that functions as a virtual COM port emulator on Windows machines. The software enables you to create virtual COM ports that you can connect in pairs by using a virtual null-modem cable. Every virtual serial port that you create will communicate with your serial applications as if they were actually physical ports.
If you have a serial monitoring device in an industrial production facility, it may be transmitting data used as input for several different applications. Creating virtual serial ports from a single port lets all of your applications receive their data at the same time.
So on these occasions, the best choice is virtual serial port emulator software. A benefit of a paid solution is that you receive regular program updates and customer support for your money. This can be a determining factor if you are doing serious development and want the most up-to-date null-modem emulator application available.
These are just a few ways that virtual ports can be used. If you work with serial devices or applications, a serial port emulator like Virtual Serial Port Driver can be an essential component of your software toolbox.
It allows the creation of virtual devices to send and receive data. Unlike parallel ports, virtual devices can be used multiple times by multiple applications. VPSE allows you to share physical data from multiple applications, expose ports to local network, create virtual parallel ports, etc.
I use a software called VSPE (virtual serial port emulator) which creates a couple of linked serial ports, so my program connects to one serial port and scratch is connected to the other. Having the link between both programs made, then you just write scratch code and click the green flag to simulate it.
Another way of doing the link between both programs is to have 2 usb serial converters wired properly. In this case you end with to hardare (not virtual) serial ports, one for the simulator and the other for scratch.
mBot folder: the executable
vcredist_x86.exe if needed
a couple of sb2 scripts: line follower and obstacle avoidance
vspe: virtual serial port emulator, optional, if you need it to link scratch with the simulator
(another way of linking the simulator with scratch is using a couple of FTDI modules wired one with each other)
So for example, create a network printer on the pos, network printers print to port 9100. Create a virtual com port and a tcp/ip server listening on port 9100 on the dvr using vspe. Tell aver to listen to the virtual com port, thats it.
About VSPE - Free Serial PortThe resource is currently listed in dxzone.com in a single category. The main category is Virtual COM port software that is about virtual serial port emulation create new COM ports on your PC.This link is listed in our web site directory since Thursday Apr 8 2021, and till today "VSPE - Free Serial Port" has been followed for a total of 633 times. So far received 2 votes for a total score of 1.00/10
You may find other interesting sites similar to this one, under the following categories:
- Software/Virtual Serial Port - virtual serial port emulation create new COM ports on your PC Rate this resourcereceived 2 votes for a total score of 1.00/10---12345678910
i have tried opening serial ports both in arduino IDE but it say port is busy and i used virtual terminal in proteus to open serial monitor there but nothing is shown there just the serial monitor screen appears there.
Hi
I am using (more appropriate would be I am trying to use) openHAB 2.5
The binding version is your latest one i believe:
org.openhab.binding.teleinfo-2.5.0-20191104-2035.
I use RS232 modem from the meter to a serial device server (Sollae -h20.php). TCP through my local network to my computer. On the computer I use a virtual serial port emulator (VSPE from eterlogic.com) that allows to split serial ports and use the same port on several applications.
It works with other software (homidom for example) but not fully with the binding as I get frames corrupted. It goes from unkown to online and rapidly after to offline.
The serial device server allows several configuration
Eterlogic Virtual Serial Ports Emulator (or VSPE) is intended to help software engineers and developers create/debug/test applications that use the port serial. It can create many different virtual devices to transmit/receive data. Unlike regular serial ports, virtual devices have special capabilities: for example, the same device can be opened multiple times by different applications, which can be useful in many cases. fit. With VSPE you can share physical serial port data for several applications, expose the serial port to the local network (via TCP protocol), create virtual serial port device pairs, etc.< /p>
The Null-modem emulator allows you to create an unlimited number of virtual COM portpairs and use any pair to connect one COM port based application to another.Each COM port pair provides two COM ports. The output to one port is the input from otherport and vice versa.
The Null-modem emulator can be used to provide serial interface for device emulators.In this case the device emulation program uses one port of the pair andthe other port can be used by Windows or DOS application thatrequires a COM port to communicate with the device.For example, to send/receive faxes over IP you can connect WindowsFax application to t38modem (T38FAX Pseudo Modem ,part of the t38modem project ) via virtual COM port pair.
0aad45d008