Is latest build working?

[Ian Bevan]

Hi

I have downloaded the image (I tried all 3 downloads) from http://xyzbots.com/grblweb.html. After booting I can see my pi2 has come up on 192.168.1.149. However there is no webserver listening. When I try and ssh into the box, it won't authenticate me. According to the aforementioned grblweb page "The default ssh login is pi/raspbian" but that doesn't seem to be true. I tried pi/raspberry too, also didn't work.

Any thoughts?

[Andrew Hodel]

https://groups.google.com/forum/#!topic/xyzbots-support/7Bg9SSKiWLg

## Booting and Initial Configuration

Once the SD card has been flashed, insert it into the Raspberry Pi 2 then connect ethernet

, your printer or GRBL, and power to boot the device.

Automatically the device will request a DHCP address over ethernet.  By default RepRapWeb is

enabled on boot, you can access the RepRapWeb interface at http://xyzbots.local (MDNS)

You can also SSH to the device at http://xyzbots.local using the following credentials:

Username: root

Password: debian

Once you SSH into the device, it will display a message explaining how to switch between

RepRapWeb and GRBLWeb as well as how to setup WiFi.  A USB Camera is automatically enabled

when connected to the device.

You were using the instructions for the rpi1 image, the pi2 instructions are linked on the main page at xyzbots.com.  It is the same image for RRW and GRBLWeb.

Andrew

--
You received this message because you are subscribed to the Google Groups "XYZBots Support for GRBLWeb and RepRapWeb" group.
To unsubscribe from this group and stop receiving emails from it, send an email to xyzbots-suppo...@googlegroups.com.
To post to this group, send email to xyzbots...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/xyzbots-support/8b6c77a1-52d1-458e-bc4f-76c0f36dd833%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Ian Bevan]

Thanks for this!

All up and running now.