GRBLweb LAN connection problem

[Diederik Abrams]

Hi gentlemen

I'm currently building a CNC machine to be able to mill some hobby parts. Because of the nice features and interface I would like to use GRBLweb CNC controller. After I used the "Win32DiskImager" to mount the image on my 8 Gb SD card, I was able to connect with my Raspberry Pi 2 through normal LAN connection and got the normal interface screen when I searched for "xyzbots.local/".  Afterwards I started to configure the WIFI connection. Because I wasn't able to configure the WIFI I went back to the old school ethernet connection. But currently nothing works anymore. When I applied the power again, my Arduino didn't gave any sign of life and I wasn't ably to get any connection with my Raspberry Pi again . The strange thing is that when I remount the image on the SD card it works fine the first time, but when I restart (power on --> off --> on) I've got the same problem (no connection + no arduino red light).

Does anybody have some experience with this kind of problems? 

Thank you in advance. Have a nice day!

Kind regards

Diederik Abrams

[andre...@gmail.com]

Connect the HDMI port to a TV and watch the boot to see where the problem is.

Andrew

--
You received this message because you are subscribed to the Google Groups "XYZBots Support for GRBLWeb and RepRapWeb" group.
To unsubscribe from this group and stop receiving emails from it, send an email to xyzbots-suppo...@googlegroups.com.
To post to this group, send email to xyzbots...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/xyzbots-support/2b517e5a-788d-481c-96ef-a5af35f508fe%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Diederik Abrams]

Hi Andrew 

Thank you for the tip! Currently the boot stops after the following command line:

"3.3902521] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block( 179,2)"

What does this mean?

Kind regards

Diederik

Op zondag 22 mei 2016 23:12:06 UTC+2 schreef Andrew Hodel:

[Diederik Abrams]

Hi again

FIXED: Problem was the SD card, took a new one and problem was solved.

Again thank you for the tip! Have a nice day.

Kind regards

Diederik

Op dinsdag 24 mei 2016 19:06:20 UTC+2 schreef Diederik Abrams: