Questions about xvisor startup on raspberry PI 3B
56 views
Skip to first unread message
zhengjun zhang
Aug 21, 2020, 12:03:59 PM8/21/20
to xvisor...@googlegroups.com
Hi,
When I started the xvisor on a raspberry PI 3B, following the tutorial BCM2837-Raspi3.txt, I had a problem with startup failure. Raspberry PI gets stuck when starting the Xvisor kernel. The detailed startup information is in the attachment.My raspbian image is 2017-08-16-raspbian-stretch-lite.img.
Regards,
ZhengjunZhang
Anup Patel
Aug 22, 2020, 8:46:06 AM8/22/20
to Xvisor Devel
Hi,
Xvisor uses serial port as console for all RPi variants.
You will need USB-Serial-TTL cable to see the RPi serial port
(https://www.adafruit.com/product/954)
Also, make sure that you have "enable_uart=1" in /boot/config.txt of
your RPi3 SD card.
(Refer, <xvisor_source>/docs/arm/bcm2837-raspi3.txt)
Regards,
Anup
> --
> You received this message because you are subscribed to the Google Groups "Xvisor Development" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to xvisor-devel...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/xvisor-devel/CAFBpWZnvJeSeDCZ%3D3JYD0TCs4j5Kss-azPw7HY6XmS4q8ZUDfQ%40mail.gmail.com.
Xvisor uses serial port as console for all RPi variants.
You will need USB-Serial-TTL cable to see the RPi serial port
(https://www.adafruit.com/product/954)
Also, make sure that you have "enable_uart=1" in /boot/config.txt of
your RPi3 SD card.
(Refer, <xvisor_source>/docs/arm/bcm2837-raspi3.txt)
Regards,
Anup
> You received this message because you are subscribed to the Google Groups "Xvisor Development" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to xvisor-devel...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/xvisor-devel/CAFBpWZnvJeSeDCZ%3D3JYD0TCs4j5Kss-azPw7HY6XmS4q8ZUDfQ%40mail.gmail.com.
Reply all
Reply to author
Forward
0 new messages