request for testing patch radeonhd HDMI support on 690G
JoJo jojo
(I do not have HDMI equippment)
-JoJo
---------- Forwarded message ----------
From: Egbert Eich <ei...@suse.de>
Date: Feb 19, 2008 9:23 PM
Subject: Re: [radeonhd] HDMI support on 690G
To: Patrick Voigt <patric...@web.de>
Cc: rade...@opensuse.org
Patrick Voigt writes:
> Hello,
>
> I'm trying to get the projector Panasonic PT-AX200E to work on my Asus
> M2A-VM-HDMI board using a HDMI connection. I setup up a dual monitor
> configuration according to the example given in the wiki. The other
> monitor is connected to the board via DVI. So I want to use to digital
> outputs simultaneously. In theory this should work using this hardware.
>
> Result is that my DVI monitor works but the projector doesn't display a
> picture. When the projector is connected and switched on xrandr reports
> this:
>
Hi Patrick!
I've got this board to work here however before I can make a final fix
I need to know how generic the solution is at least for RS690 based boards.
I've attached a patch to
http://bugs.freedesktop.org/show_bug.cgi?id=14487
which should make things work on the Asus board and hopefully on other
RS690 based boards as well.
I'm still waiting for some RS690 users to report back to me.
Please note that this patch is for RS690 only for now - it will make
things not work on other boards.
Cheers,
Egbert.
--
To unsubscribe, e-mail: radeonhd+u...@opensuse.org
For additional commands, e-mail: radeon...@opensuse.org
macauhtpc
LCDTV via HDMI. It is working fine with HDMI since radeonhd 1.1.0. The
last git version even gives me XAA acceleration.
BTW, I wonder how I can change the refresh rate on radeonhd, for I
prefer to 50Hz rather the the default 60Hz.
-Bruce
On Feb 20, 12:07 am, "JoJo jojo" <onetwoj...@gmail.com> wrote:
> can someone with HDMI test and report back to Egbert ?
>
> (I do not have HDMI equippment)
>
> -JoJo
>
> ---------- Forwarded message ----------
> From: Egbert Eich <e...@suse.de>
> Date: Feb 19, 2008 9:23 PM
> Subject: Re: [radeonhd] HDMI support on 690G
>
> Cc: radeo...@opensuse.org
> Patrick Voigt writes:
> > Hello,
>
> > I'm trying to get the projector Panasonic PT-AX200E to work on my Asus
> > M2A-VM-HDMI board using a HDMI connection. I setup up a dual monitor
> > configuration according to the example given in the wiki. The other
> > monitor is connected to the board via DVI. So I want to use to digital
> > outputs simultaneously. In theory this should work using this hardware.
>
> > Result is that my DVI monitor works but the projector doesn't display a
> > picture. When the projector is connected and switched on xrandr reports
> > this:
>
> Hi Patrick!
>
> I've got this board to work here however before I can make a final fix
> I need to know how generic the solution is at least for RS690 based boards.
>
> RS690 based boards as well.
> I'm still waiting for some RS690 users to report back to me.
> Please note that this patch is for RS690 only for now - it will make
> things not work on other boards.
>
> Cheers,
> Egbert.
>
> --
> For additional commands, e-mail: radeonhd+h...@opensuse.org
JoJo jojo
The last git doesn't have this patch. so will have to be seperately tested.
Are they saying that RS690 can drive 2 digital outputs at the same time ?
-JoJo
macauhtpc
Sorry, my board only has a Sub-D and a HDMI out, no DVI.
-B
On Feb 20, 12:31 pm, "JoJo jojo" <onetwoj...@gmail.com> wrote:
> ah good that you help devs test.
>
> The last git doesn't have this patch. so will have to be seperately tested.
>
> Are they saying that RS690 can drive 2 digital outputs at the same time ?
>
> -JoJo
>
JoJo jojo
probably someone else on this group might help.
-JoJo
portalis
8432cb08) connected to a Sony XBR1 via the HDMI connector. The
display is found and properly identified:
(II) RADEONHD(0): Output DVI-D_1 connected
...
(II) RADEONHD(0): Output DVI-D_1 using monitor section SONY XBR1
(with the TDMS output associated as expected with DVI per Egbert's
patch)
but there's never even a flicker on the HDMI connected LCD. On a
reboot from power-down both the VGA and HDMI connected monitors show
activity ... and then the HDMI connection goes dead.
JoJo jojo
apparantly HDMI only works, if connected & powered on from the boot.
doesn't work, if connected after system bootup. weird.
-JoJo
portalis
Yes, sorry, I should have been more clear. I did have HDMI connected
and powered on from boot. And once the HDMI line goes dark, a
subsequent reset without power-off/power-on doesn't change things.
Also, I believe this recent bug report describes the situation I'm
seeing:
http://bugs.freedesktop.org/show_bug.cgi?id=14772
At least, I think it does. It's not clear from the bug report if
"flashes on and off" means that the DVI-D connected monitor flashes
*repeatedly* (which is not what I see), or if it means if flashes on
and then off - once (which *is* what I see).