wview

wview, and this support group, are pretty much dead. I would suggest switching to weewx. Your old

Does anyone know what the Annual Climatolociaal Summary Reports are based on for the calculation for

My Temperature sensor has packed up so I cannot complete the wmrInit process. Is there a way round it

Hi all, Is there somewhere that I can download a current Raspberry Pi (3 or 4) SD card image? Cheers,

Well it took a while, but Wview is alive and well again..... The pi is now running POE from a UPS

Hi all, Just responding to the flurry of messages. Sorry to hear that wview has really had the plug

I moved to weewx about a year ago. I documented my data cleanup before the move, and the setup

Data is transferred from the station to the rasp but incorrectly all data are labeled with the same

I think it's really the datalogger that has to be compatible. Weather Monitor II did support a

Strings in the database usually come from using one of the visual sqlite editors, then deleting a

I just realized that you referenced a formula for wind chill. This is something completely different

Hi i'm using davis vantage pro

Well, I did the switch. It was quite easy, really. I have documented my experience on http://www.

Every year when it gets cold in January, I am reminded that this is still hanging out there :) Has

We are currently running our weather station for 8 years and 8 months...hmmm. Thanks a lot for your

HI Eddy, I played today with rrdtool an some special woodoo. ;) https://wetterstation-pliening.info/

yes - remove the offending summary database (while wview not running of course) and wview will detect

I think a lot of folks are moving to weewx. It uses the same db schema as wview, so data can be moved

Hi I created a card with the image of raspbian Jessie (debian 8) and Stretch (debian 9) with several

Thank you and will look into it. Presently out of town so not available to check tonight or this

Hello, I happened to see here that 7 years ago someone used wview and RRDTool in the same sentence.

Hi all. I am using raspberry pi and - wview 5.21.7. If I leave the archive for more than 5 minutes it

Just for the record, all weeWX plots update as often as their aggregation interval. By default,

I've decided, after almost 15 years of view, to switch over to weewx. Turns out it was easier to

As long as wview is working, there's no reason to change to weewx. My PC board crashed. Mark Teel

This is in reply to Graham's question about wview vs. weewx in another post. First of all I would

i would like to hear from people who have compared wview with weewx in production (not just on paper)

It was necessary to install the dev libraries for both these packages when I last installed from

Hi jonrysh, just a couple of suggestions First get the new system up and running in the simulator

that wedge color is defined by DIAL_APP_COLOR in etc/wview/graphics.conf ____________ Graham Eddy On