Re: [Wireless Sensor Tags Forum] High Erroneous Temp Readings / External Probe / Reed Switch and ”Monitor Temperature” enabled

[Zhiheng Cao]

Thanks for reporting the issue. Will look into it.

On Friday, January 22, 2016, Cabincats <cabincat...@gmail.com> wrote:

I open a support ticket but curious if anyone has seen this as well.  

Using reed switch tag with the recommend DS18B20 temperature probe.

• Reed switch set to utilize external probe

• Temperature reads normal of around 98 for hot tub

[Problem]

• ”Monitor Temperature” enabled

 • Set range to 90-100

 • 0 on Threshold window

 • Check temp every minute

 • Notify on too cold or hot after one consecutive reading

Immediately upon enabling "Monitor Temperature" the temperature jumps up to 258.9’F.

I have tried calibrating the temperature down but eventually the tag will give me the equivalent of erroneous data from tag.

To Fix and get back to correct temperature I simply have to disable ”Monitor Temperature” and correct temperature appears a couple update button clicks.

--
You received this message because you are subscribed to the Google Groups "Wireless Sensor Tags" group.
To unsubscribe from this group and stop receiving emails from it, send an email to wireless-sensor-...@googlegroups.com.
To post to this group, send email to wireless-s...@googlegroups.com.
Visit this group at https://groups.google.com/group/wireless-sensor-tags.
To view this discussion on the web visit https://groups.google.com/d/msgid/wireless-sensor-tags/3e8ae2cc-1c84-4dd7-bf97-a3a8e3bc7d7c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
Sent from MetroMail

[Zhiheng Cao]

This has been fixed.