Reed KumoSensor Reset

[Joe McMenimen]

I have a Reed KumoSensor that was associated with my Tag Manage .I removed it and now cannot find it. I restored the sensor, but now it will not update and says it is out of range.

Is there a way to reset the tag and re-associate it?

Also the LED only blinks a few times when I insert the battery. Is this normal, or maybe the issue.

thanks

[Zhiheng Cao]

If the LED only blinks a few times then stops, it means it is still associated to a tag manager. You can open the case, use a wire to short hole 1&3 (http://store.wirelesstag.net/pages/support#factory_reset) then swipe the magnet on the left side to make it flash, then associate again. 

--
You received this message because you are subscribed to the Google Groups "Wireless Sensor Tags" group.
To unsubscribe from this group and stop receiving emails from it, send an email to wireless-sensor-...@googlegroups.com.
To post to this group, send email to wireless-s...@googlegroups.com.
Visit this group at http://groups.google.com/group/wireless-sensor-tags.
To view this discussion on the web visit https://groups.google.com/d/msgid/wireless-sensor-tags/8316b573-c08d-42df-9708-196b6865575b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Joe McMenimen]

Thank you for the quick response and the explanation oft he LED flash.

Is the procedure to short the Reed KumoSensor the same as the regular Sensor. I think I remember only 4 PINS.

thanks

On Tuesday, September 8, 2015 at 2:50:26 PM UTC-4, mytaglist.com support wrote:

If the LED only blinks a few times then stops, it means it is still associated to a tag manager. You can open the case, use a wire to short hole 1&3 (http://store.wirelesstag.net/pages/support#factory_reset) then swipe the magnet on the left side to make it flash, then associate again. 

On Tue, Sep 8, 2015 at 8:09 AM, Joe McMenimen <joseph.m...@gmail.com> wrote:

I have a Reed KumoSensor that was associated with my Tag Manage .I removed it and now cannot find it. I restored the sensor, but now it will not update and says it is out of range.

Is there a way to reset the tag and re-associate it?

Also the LED only blinks a few times when I insert the battery. Is this normal, or maybe the issue.

thanks

--
You received this message because you are subscribed to the Google Groups "Wireless Sensor Tags" group.

To unsubscribe from this group and stop receiving emails from it, send an email to wireless-sensor-tags+unsub...@googlegroups.com.

[Joe McMenimen]

That worked. Thank you