Furling of the windturbine

51 views
Skip to first unread message

Hans Peter Duesentrieb

unread,
Apr 2, 2015, 5:47:20 PM4/2/15
to wind-emp...@googlegroups.com
Hi wind-enthusiastic-people,

I´m looking for a topic of my thesis for my bachelors degree in renewable energies.
Due to my onlineresearch in the area of windenergy I found the "A Wind Turbine Recipe Book" by Hugh Piggott and
I would like to contribute with my thesis to this project. I saw that there are already quite a lot of studies conducted.

My idea was to studie the furling of the windturbine.
It´s very important for the energy-yield that the windturbine uses all the available wind in
higher windspeeds. Of course just untill a certain barrier, so it doesn´t get damaged or destroyed.
So for a optimal energy-yield it is important to optimize the point when the windturbine starts to furl.
This investigation would help to get a better knowledge/understanding which parameters influence the furling, and with what degree they do it.
My idea was to investigate the following parameters:
tail-length, tail-weight, tail-angle, size of the board of the tail, windspeed,........ to be continued(-:

It´s still a very superficial idea but I already would like to share it with you to get some feedback.

I´m greatful for every comment, feedback or advice.

Thanks a lot and
windy regards
immanuel(-:

Jon Sumanik-Leary

unread,
Apr 3, 2015, 5:59:26 AM4/3/15
to wind-emp...@googlegroups.com, Esteban Van Dam, Kostas Latoufis
Hi Immanuel,

Thanks for getting in touch with us. This is indeed an area that has not been well studied, so a valuable contribution could be made to the design with a well-targeted research project.

We have a working group dedicated to technical projects, so I've copied and pasted your message over there and sent you a reply, so that we can engage our relevant experts: http://windempowerment.org/technology-working-group/

Cheers,
Jon
--
You received this message because you are subscribed to the Google Groups "Wind Empowerment General Discussion Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to wind-empowerme...@googlegroups.com.
To post to this group, send email to wind-emp...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/wind-empowerment/f44e384c-31ac-47a9-b8c9-59990eb6fba1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply all
Reply to author
Forward
0 new messages