Daikin Brc4c151 Remote Control
Ashlie Mealey
Control Daikin Air Conditioner Over the Internet: Here is a small home-automation project that I have been working in my free time. I wanted to control my home-made air source heat pump system (based on Daikin FTX71GV / RX71GV ) from anywhere with...
Have you tried with any IR-MQTT IR (blaster) bridge, with OpenMQTTGateway or Tasmota? These should definitely show you any signals which get send when operating the remote, which you can then reprpduce with said bridges and MQTT.
I am sorry, questions you posed regarding detecting temperature and other settings, is beyond my capabilities I just think its too much effort as against the benefits, in my case. But will be happy to know how you managed to do it, if at all and when. good luck.
You have lost your remote to control your air conditioner from DAIKIN? No panic!
Use our search engine to find a suitable original model of the air conditioner. In our catalog there are more than 30 Models for your device.
It is possible that the manufacturer has stopped producing the model. Remotecontrol-Express then offers a compatible or universal product which has been tested by our technical service to do the same functions of your original air conditioning remote from DAIKIN. These are fully compatible!
The best way to find you correct remote control for your TV/DVD/BluRay/HDD Player / Air conditioner is to check:
1. If the new remote control looks identical from your old one.
2. If the new remote does not look 100% same, but most of its parts/buttons/design are the same or quite similar, then probably this new replacement remote control will work on your device, because due to the Industry protducts design guide, most of the same series TV/DVD/Blu-Ray Devices are sharing the same remote control IR code set. This will allow those TVs/DVDs/Players to share the same remote control, or at least most of the functions on the new remote will work.
CAUTION
- Refer also to the installation manuals attached to the indoor unit and the decoration panel.
- Confirm that the following conditions are satisfied prior to installation.
Ensure that the operation display lamp and other indicators are easy to see.
When the indoor unit is being operating by outside control (central remote controller, etc.), it sometimes does not respond to ON/OFF and temperature setting commands from this remote controller. Check what setting the customer wants and make the multiple setting as shown below.Remote controllerIndoor unitMultiple settingRemote controller displayTo control other air conditions and unitsFor other than on leftA: StandardAll items dis- played.Commands other than ON/OFF and temperature setting accepted. (1 LONG BEEP or 3 SHORT BEEPS emitted)
CAUTION
Set the Unit No. of the receiver and the wireless remote controller to be equal. If the settings differ, the signal from the remote controller cannot be transmitted.5. FIELD SETTINGIf optional accessories are mounted on the indoor unit, the indoor unit setting may have to be changed. Refer to the instruction manual (optional hand book ) for each optional accessory.
@manualsplus YouTubeManuals+,Privacy PolicyThis website is an independent publication and is neither affiliated with nor endorsed by any of the trademark owners. The "Bluetooth" word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The "Wi-Fi" word mark and logos are registered trademarks owned by the Wi-Fi Alliance. Any use of these marks on this website does not imply any affiliation with or endorsement.