Dynazip Unzip Error Zip File Read Error
Dawn Summerville
A Dynazip error usually indicates that either some program used by your computer is corrupting the update file when it is downloaded or being unzipped on your computer (see next section), a file necessary to unzip update files is missing from your computer (see Specified module not found section below), or a damaged update file is blocking subsequent updates. Close CTI Navigator and all other programs (especially any email antivirus or security program), and try updating again before attempting a fix described below.
If emptying the Update folder does not fix the error, follow the instructionsbelow to ensure that your Internet Firewall or Internet Securityprogram is set to always allow CTI Navigator to access the Internet anddownload files.
To fix a dynazip error such as "cannot create output file" or "cannot load library", disable all components of your antivirus and/or Internet Security (such as Norton or McAfee). If you have an Internet Popup Blocker running, disable it (see related articles below). If you are running Windows XP with Service Pack 2 (SP2), Windows Vista or Windows 7, follow the instructions to "Configure Security Settings in Windows" in the related articles below. Essentially these Windows security settings are:
If the dynazip error persists, temporarily turn off all the programs that startup every time Windows starts - one of which may be interfering with the update. To disable startup items, follow the instructions at Disable Unnecessary Windows Startup Items in the related articles below. Essentially these steps are:
A Dynazip DLL error that "Specified module not found" indicates that some security program used on your computer has removed (or quarantined) files necessary to unzip update files or zip files to send to the MLS server. To install the missing files:
- Receiving a dynazip error when attempt to open a journal file
- The error is "DynaZip UnZIP Error: Zip file structure invalid (Problem reading ZIP file)"
- Receiving a "Cannot open file: it does not appear to be a valid archive" message when manually attempt to open the electornic journal files using winrar/winzip,
Here i have Bookfolder in that few more folders(english,hindi,japanese).Converting english,hindi,japanese to english.zip,hindi.zip and japanese.zip.Everything is working fine and i'm keeping zip files and folders inside Bookfolder,this thing i'm doing using with java.But when i'm unzipping manually the zip file ex:english.zip ,right click on that extract here then showing error as UNEXPECTED END OF ARCHIVE.This is my code.
Notes: If you notice this error is referencing an Action named DoAutoCADShortcutsCA. This error is caused by the file (missing) that this action is controlled by. The readme lists Bentley View V8i as a Dependency for the AutoPLANT applications. This could be confused in an installation order. Users should not receive this error if they have Microstation or AutoCAD installed previously as RealDWG would have been installed previously.
Problem:
If you have a 10 ul syringe installed and specify a 10 ul injection volume, the system will not indicate any problem until runtime. This is because the driver cannot look into the script to determine total volume (ie sample volume and air gap). This calculation is done at run and the error shows then.
Problem:
The software allows the user to enter invalid parameters for the draw and dispense speeds for the syringe.Using an "Add" command it generates a "Command to XXX Tower failed: XXX Tower Prep Failure Code: 142: Autosampler setpoint error..."The error message is limited and it takes effort to find the "invalid" parameter.
Problem:
[EDTAB60: could not set window title because register was locked]With or without Purification Software having a combination of sample nameand result set path, which exceed the ChemStation limit of 103 characters.In that case no fraction results table is displayed in ChemStation Data Analysis View:Purify and error message in the ChemStation status line: "EDTAB60: could not set window title because register was locked"
Problem:
When a task evaluation results in No peak detector error (e.g., MSD was on and UV off but no mass was entered)the appropriate error occurs but Fraction Collection tab is Task Configuration is inaccessible
Problem:
Randomly the ChemStation logbook is reporting the "DAD internal error 10010".The issue is due to few spetra lost during the acquisistion.The Automated Purification Software is capable to manage this small lack of data.Calculations and "Target Compound" identification are working as expected.
Problem:
HeadSpace Method loaded in ChemStation.The Injection Source is set to HeadSpace SamplerEasy Sequence SetupSample InformationStarting Vial LocationAny number entered into this location will error with the following error message:The vial position could not be validated against the current configuration
Problem:
Method with a single add step of 1000 uL. Syringe size is 10 uL. Vials are moved to turret and then error message displays: method not running.This is a mismatch in # injections/volume/syringe size/solvent allowed by firmware.
Problem:
Create an Easy Sequence Template for a G1888/6890. There is no error checking for Injection volume for this injection source in either the Setup or Sample List. All values are accepted, including negative numbers.There is no place to setup an 'injection volume' for a HeadSpace. There is only a time and pressure.
Problem:
There is no error checking within Easy Sequence Setup to determine if the vial range of the loaded method's injection source is accurate.The method can be saved and submitted to the queue. It fails at this time with:'---------------------------Error---------------------------Invalid location found in FRONT sequence, line 1There may be others---------------------------OK ---------------------------'This defect occurs because there is a difference between the loaded method's injection source and the method that is selected in the Easy Sequence Template.
Problem:
Started a sequence (55 injections), but the sequence was aborted soon after the start. Chemstation showed status "ready" and instrument showed status "idle". The sequence could be restarted and ran without error after the restart.
Problem:
C.01.08 and higher allows users to add data fields in the report headers and footers. However this functionality will not be functional when the report output chosen is a DOC or TXT file extension. In this case an error message will appear in the report file.
Problem:
Trying to upgrade an Shared Services using SQL server windows authentication with a user who is not the owner of the already installed OLSS DB will lead to an error. Microsoft does not support such an update with a different user.
Fix Information:
With driver version A.02.19 the parameter "Overfill Behavior" is removed, in order to prevent a loss of sample / fractions and to make the behavior more clear. The LC drivers now imply the following behavior: When Pooling: in case the fill volume of a location reaches the maximum fill volume, the run or sequence is stopped with an error.When not Pooling: in case the fill volume of a location reaches the maximum fill volume, the collection switches to the next available location.
Problem:
When the Split Peak timed event happens to be at a very front edge of a peak start,it can cause an error message on the message line or logbook or show an error message box when the edit integration user interface is open. The error message is: "Could not integrate signal. Probably too many peaks found! Please adjust integration events for less sensitivity ". There are critical times when the Split Peak timed event can cause the integrator to return a misleading error message.
Problem:
When using OpenLab CDS 2.5 together with the legacy Fraction Collector Cluster (supporting G1364A/B/C and G5664A), an error can occur during sequence setup. The error is caused by using the graphical "Sample Trays" UI when one of the collectors in the cluster is used as Recovery collector.
Problem:
Logical errors are not handled well, when locations in fraction collection cannot be accessed.An example would be a next location command, when the arm is already at the last position.Various symptoms can occur, like macro errors (Error in Hook RepPreChrom ) or duplicate injection times.
Problem:
When a run has been completed, "CP Macro" error logs will be added to the logbook in ChemStation C.01.07 SR3, in case a Fraction Collector is used. The error logs do not indicate an actual problem. These error logs can safely be ignored by the user.Besides these logbook entries, no other side effects are observed.The error logs can safely be ignored by the user.
Problem:
B.04.03 GC ChemStation with a 35900E configured. Select the CHANGE, DEFINE EVENTS tab in device configuration and you get an error "The Current Event Name is the same for a special event. Please change the current event name." This error is reported on a clean install of B.04.03 [16].ChemStation B.03.02 works correctly.
Problem:
When you view the Activity log from OpenLAB Control Panel for a given instrument with a 35900 attached, some of the status messages and error messages will truncate the last letter of the message. For example, Power Failure will be displayed as Power Failur, or Power On will be displayed as Power O. The actual run.log and other logbooks will display the complete error message correctly.
Problem:
Upgrading from B.01.03 to B.04.02, it is no longer possible to add new columns to the GC column catalog (database) in Rev. B.04.02.The following error is shown:The Catalog File cannot be opened. If needed, you may obtain an appropriate replacement file from Agilent.C:\Chem32\CORE\...\DRIVERS\catalog.mdb