Pmc Edit

[Timothee Cazares]

HiSBabiche, we appreciate the feedback on this matter. As my colleague said, ti isn't possible to edit Excel files natively in the Dropbox mobile app. The files would need to be opened in the Excel app to be able to edit them.

Did this post help you? If so, give it a Like below to let us know.

Need help with something else? Ask me a question!

Find Tips & Tricks Discover more ways to use Dropbox here!

Interested in Community Groups? Click here to join!

First, the Dropbox iOS app does not recognize the Microsoft 365 iPhone app. I installed that, then had to also install the individual Excel app for the Dropbox app to show "Open with . . .", with "Microsoft Excel" as the option. Instructions should clarify that you need the specific app (Excel, Word, etc.).

3. At the bottom of the window, click on the box with an arrow pointing up and to the right (northeast if it were a compass). This box is to the left of the Link button (looks like a link in a chain) and the Share button.

5. At the top of the screen it will show which iPhone files folder it's currently in. If it's not Dropbox, click the back button on the top left. In my case, that was marked "On My iPhone". Once I did that, the screen showed folders on the phone, but not Dropbox. The back button at the top left now said "Browse". Click on that. [Essentially, keep tapping on the top left back button until you get to the Browse page.]

6. You should now be at a page titled "Browse" top center, with "Cancel" on the left. In the Locations list in that page you should see Dropbox as an option, likely below "iCloud Drive" and "On My iPhone". Click on Dropbox.

Note: The first time I tried this it worked. When I tried it again I got an odd message about changing Privacy Settings. However, quitting both the Dropbox and Excel apps and starting over got it working again. After I did a small edit, and went out of the file in the Excel app, and tried to go back, I got the same Privacy Settings message, and had to quit and restart again. This appears to be a bug. I will need to play with this some more.

The DALLE editor interface enables you to edit images by selecting an area of the image to edit and describing your changes in chat. You can also provide a prompt with your desired edit in the conversation panel, without using the selection tool.

Great news here! One caveat though is that this function is not yet available on Custom GPTs though, namely, there is no way to impaint a generated image in the custom GPT (see example screenshot where the impainting function is missing when enlarging the picture). Does anyone know whether this is on the roadmap?

image24411382 310 KB

Oddly, I can no longer edit color styles. When I click on the edit icon, I get an inert color picker. Clicking on that brings up a repeat of the edit color box. I have Figma up to date. Did something change or is it my system?

Thank you, yes. It took me a while to understand how this worked and then how to find that darn set of variables.

I was looking for them in all the wrong places. I did finally find them in the global folder, and then I was able to edit just fine.

Hi - yes there are check marks for all the layers. Maybe this helps: I just edited my post to add that when I create the offline area through the app, I am able to edit. But I'd rather create it in Field Maps Designer.

There can be two reasons. When the map was published from ArcMap or ArcGIS Pro to ArcGIS Online, you can select options to be able to delete, edit, create, etc the published feature layer. Then once in ArcGIS Online you can change the feature layer settings as well, but not if for instance you chose to not be able to delete in the publishing step.

I am having the same troubles on my Field Map that I created for wetland delineation. Allow editing and Sync is on for all layers. The online version of the webmap works just fine, but the offline map area version doesn't allow editing. If I create Offline Areas in my iPhone, those are editable. Cannot seem to make it work with the Designer App.

I am having the same troubles on my FieldMap that I created for a project. I've Allowed editing and sync is enabled is on for all layers. The online version of the webmap works just fine (in FM), but the offline map area (that I created in AGO) version doesn't allow editing.

It seems to be some sort of bug as I am able to get it to work if I create the offline area within the mobile field maps app. I got around the issue in the Field Maps Designer on my laptop by playing with the extent of the offline area (e.g., going in smaller and only covering the points of interest not the entire mountain region). It may be the fact that I played around with the "Level of detail" slider too.

Having the exact same issue here. I believe I have all the sharing/editing permissions set up correctly for the map and features. In Field Maps, I'm able to edit features with the online map, but not with the offline map area that I made with Field Maps Designer. When I create an offline area within Field Maps on the device itself, the editing feature works just fine.

I just ran into this same issue. As others have stated, creating the Map Area on the device worked, but I looked a bit further and found what the issue was in my scenario and can now create Map Area's online and successfully edit on the device.

I returned to Pro and re-published the layer with that option enabled. It did NOT show "Enable Z Defaults" as "true" at the REST endpoint after the initial re-publish, so I re-published it again and the value updated at the REST endpoint.

I then returned to the Web Map and editing was working there, so I created a new Map Area online, downloaded it on the device, and voila - IT WORKS! I can now edit on the device using Map Areas created in the Field Maps Web environment.

If no answers show up from checking those, are you able to add any updates to any items in your Monday.com account? (Check in another Workspace too)

If not, are you able to create a new board in the affected Workspace and add/edit/update items on it?

If not, are you able to create a new board in a new Workspace and add/edit/update items on it?

I am experiencing the same issue. I created all the boards in my account, and I am the only Admin, yet when I try and select any item within a board, I am given a message saying I can only view. When looking at permissions, I am the owner.

hello, I have a sheet in which I am the owner and I have a person whose email address is only appearing in the dropdown. Normally, I would edit via the pencil, but in this instance the name field is greyed out. I've not encounted this before. Any ideas on how to change this?

So I double clicked on the contact column and selected the pencil next to the email address which opened up the same Edit Contact window you have displayed above. I can edit the e-mail address fine but not the name. It may be because there was no name initially added when the contact was added. I don't actually recall the expected behavior for this but there is a solution for you to get around this.

You will need to basically go to the contact column and then add the contacts name in the search window. Click to 'add to list' (see image below) From the contact list you can go to the name you just entered then click on the pencil icon to open the 'Edit Contact' pop up window. There you can add the email address. Click 'Save' and you will see the e-mail added. Then go back to the contact list and delete the entry with just the email address. You will want to update the contact cells that had just the email and replace it with the updated contact you created with both the name and email.

Note that this name won't appear in other sheets, it will be sheet-specific. If you want to update the contact name across your personal account, that's where you'll need to go into "My Smartsheet Contacts".

After going into My Smartsheet Contacts and clicking "Add", I am seeing that when typing in new contact info into the Contact dialog box, I am unable correct / edit any typo in the name or email address. In other words, I am unable backspace or delete any typed characters. I also am unable to add any additional spaces. I can however enter new characters, but this does nothing to correct any misspellings, and actually makes the problem worse.

The only thing I can do to correct a mistyped name or email address is to close the Contact dialog box and start over. I am experiencing this over and over again, many times, and can replicate the problem repeatedly, and would be happy to demonstrate it to any SS support person.

I am having the same issue Christos described above, where they were unable to edit in the My Smartsheet Contacts dialog box. In addition to closing out, I also had to refresh my screen in order to clear the dialog box, as simply closing out and re-opening My Smartsheet Contacts did not clear the dialog box.

3a8082e126