Record Manually Meaning

[Jamey Saldana]

In HubSpot, certain activities are logged on records automatically, but you can also manually create new calls, emails, meetings, and messages, or log activities that occurred outside of HubSpot (e.g., a meeting with a client that wasn't booked, or a message sent via LinkedIn).

View-only Seats users do not have access to email, chat, or phone support. If you have multiple HubSpot products, your support options are based on your highest subscription. Learn more about getting help with HubSpot.

Local, state, and federal government websites often end in .gov. Commonwealth of Pennsylvania government websites and email systems use "pennsylvania.gov" or "pa.gov" at the end of the address. Before sharing sensitive or personal information, make sure you're on an official state website.

A review of an individual's entire criminal record. It includes convictions as well as all non-convictions. Any individual is permitted to request his or her entire criminal record history. Many times an A&R is requested for court proceedings by attorneys, for an expungement or partial expungement of the individual's record, or a governor's pardon.

Criminal History Record Information - Information collected by criminal justice agencies concerning individuals and arising from the initiation of a criminal proceeding, consisting of identifiable descriptions, dates and notations of arrests, indictments, information or other formal criminal charges, and any dispositions arising therefrom. The term does not include intelligence information, investigative information, or treatment information, including medical and psychological information, or information and records specified in section 9104 (relating to scope).

Information indicating that criminal proceedings have been concluded, including information disclosing that police have elected not to refer a matter for prosecution, that a prosecuting authority has elected not to commence criminal proceedings or that a grand jury failed to indict and disclosing the nature of the termination of the proceedings; or information disclosing that proceedings have been indefinitely postponed and also disclosing the reason for such postponement. Dispositions of criminal proceedings in the Commonwealth shall include, but not be limited to, acquittal, acquittal by reason of insanity, pretrial probation or diversion, charge dismissed, guilty plea, nolle prosequi, no information filed, nolo contendere plea, convicted, abatement, discharge under rules of the Pennsylvania Rules of Criminal Procedure, demurrer sustained, pardoned, sentence commuted, mistrial-defendant discharged, discharge from probation/parole or correctional supervision.

The response received when identifiers submitted match identifiers in the PSP criminal history database. This does not necessarily mean there will be a "Record" response. This request must be reviewed manually to determine whether it will be a "Record" or a "No Record". Only "Record" responses will be mailed to the requester. "No Record" responses must be retrieved by the requester via the PATCH website.

Source properties tell you where your contacts come from, including how they came to visit your website, or how they were created or updated via offline sources. There are also source properties for companies and deals, which are based on associated contacts' source values.

The Original source property tells you the first known source through which a contact interacted with your business. The Latest source property shows the most recent known source. These properties are automatically set by HubSpot, but you can update the value on a contact record manually.

While the Original source and Latest source properties give a broad category for the source, each respective drill-down property provides more specific information depending on the Original or Latest source value. For example:

Samplers perform the actual work of JMeter. Each sampler (except Flow Control Action) generates one or more sample results. The sample results have various attributes (success/fail, elapsed time, data size etc.) and can be viewed in the various listeners.

This sampler lets you send an HTTP/HTTPS request to a web server. It also lets you control whether or not JMeter parses HTML files for images and other embedded resources and sends HTTP requests to retrieve them. The following types of embedded resource are retrieved:

If you are going to send multiple requests to the same web server, consider using an HTTP Request Defaults Configuration Element so you do not have to enter the same information for each HTTP Request.

Or, instead of manually adding HTTP Requests, you may want to use JMeter's HTTP(S) Test Script Recorder to create them. This can save you time if you have a lot of HTTP requests or requests with many parameters.

If the request requires server or proxy login authorization (i.e. where a browser would create a pop-up dialog box), you will also have to add an HTTP Authorization Manager Configuration Element. For normal logins (i.e. where the user enters login information in a form), you will need to work out what the form submit button does, and create an HTTP request with the appropriate method (usually POST) and the appropriate parameters from the form definition. If the page uses HTTP, you can use the JMeter Proxy to capture the login sequence.

If the request uses cookies, then you will also need an HTTP Cookie Manager. You can add either of these elements to the Thread Group or the HTTP Request. If you have more than one HTTP Request that needs authorizations or cookies, then add the elements to the Thread Group. That way, all HTTP Request controllers will share the same Authorization Manager and Cookie Manager elements.

Additionally, you can specify whether each parameter should be URL encoded. If you are not sure what this means, it is probably best to select it. If your values contain characters such as the following then encoding is usually required.:

If it is a POST or PUT or PATCH request and there is a single file whose 'Parameter name' attribute (below) is omitted, then the file is sent as the entire body of the request, i.e. no wrappers are added. This allows arbitrary bodies to be sent. This functionality is present for POST requests, and also for PUT requests. See below for some further information on parameter handling.

Parameter Handling:
For the POST and PUT method, if there is no file to send, and the name(s) of the parameter(s) are omitted,then the body is created by concatenating all the value(s) of the parameters.Note that the values are concatenated without adding any end-of-line characters.These can be added by using the __char() function in the value fields.This allows arbitrary bodies to be sent.The values are encoded if the encoding flag is set.See also the MIME Type above how you can control the content-type request header that is sent.
For other methods, if the name of the parameter is missing,then the parameter is ignored. This allows the use of optional parameters defined by variables.

In Body Data mode, each line will be sent with CRLF appended, apart from the last line.To send a CRLF after the last line of data, just ensure that there is an empty line following it.(This cannot be seen, except by noting whether the cursor can be placed on the subsequent line.)

Method Handling:
The GET, DELETE, POST, PUT and PATCH request methods work similarly, except that as of 3.1, only POST method supports multipart requestsor file upload.The PUT and PATCH method body must be provided as one of the following:

The GET, DELETE and POST methods have an additional way of passing parameters by using the Parameters tab.GET, DELETE, PUT and PATCH require a Content-Type.If not using a file, attach a Header Manager to the sampler and define the Content-Type there.

JMeter scan responses from embedded resources. It uses the property HTTPResponse.parsers, which is a list of parser ids, e.g. htmlParser, cssParser and wmlParser. For each id found, JMeter checks two further properties:

HttpClient4 and Java Sampler support emulation of slow connections; see the following entries in jmeter.properties: # Define characters per second > 0 to emulate slow connections#httpclient.socket.http.cps=0#httpclient.socket.https.cps=0 However the Java sampler only supports slow HTTPS connections.

Response size calculation
The Java implementation does not include transport overhead such aschunk headers in the response body size.
The HttpClient4 implementation does include the overhead in the response body size,so the value may be greater than the number of bytes in the response content.

Retry handling
By default retry has been set to 0 for both HttpClient4 and Java implementations, meaning no retry is attempted.
For HttpClient4, the retry count can be overridden by setting the relevant JMeter property, for example: httpclient4.retrycount=3 With HC4 Implementation, retry will be done on Idempotent Http Methods by default.If you want to retry for all methods, then set property httpclient4.request_sent_retry_enabled=true Note that the Java implementation does not retry neither by default, you can change this by setting http.java.sampler.retries=3

Note: Certificates does not conform to algorithm constraints
You may encounter the following error: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints if you run a HTTPS request on a web site with a SSL certificate (itself or one of SSL certificates in its chain of trust) with a signature algorithm using MD2 (like md2WithRSAEncryption) or with a SSL certificate with a size lower than 1024 bits.

To allow you to perform your HTTPS request, you can downgrade the security of your Java installation by editingthe Java jdk.certpath.disabledAlgorithms property. Remove the MD2 value or the constraint on size, depending on your case.

c80f0f1006