gw1000 service field_map_extensions

[Graham Eddy]

i am testing gw1000 driver (b9) in service not driver mode.
my entries in weewx.conf under [GW1000] [[field_map_extensions]] were being ignored
but worked fine if i put them under [Gw1000Service] [[field_map_extensions]].
i don’t know if this difference was intentional but i didn’t see it documented (could be my bad spectacles again…)

[Graham Eddy]

actually the merger of the extensions into the fieldmap seems to have just added the extensions, not overwritten the defaults. i guess the duplications are mucking up the mappings and therefore the values i’m archiving

my weewx.conf contains

[Gw1000Service]

    [[field_map_extensions]]

        shadowInTemp = intemp

        shadowOutTemp = outtemp

        shadowDewpoint = dewpoint

        shadowWindChill = windchill

        shadowHeatindex = heatindex

        shadowInHumidity = inhumid

        shadowOutHumidity = outhumid

        shadowPressure = absbarometer

        shadowWindDir = winddir

        shadowWindSpeed = windspeed

        shadowWindGust = windgust

        shadowRain = rain

        shadowStormRain = rainevent

        shadowRainRate = rainrate

        radiation = uv

        aqiPm251 = 24havpm251

        aqiPm252 = 24havpm252

(all these shadow entries are because i will store the gw1000 values for comparison with my primary source, the old vp2 - i am running the gw1000 driver as a service to augment the vp2 data)

in the copy-pasted entry from log below, look for example at all the weewx fields called shadow* e.g. shadowInTemp <- intemp *and* inTemp <- intemp

Aug  3 22:09:21 dizzy weewx[29959] INFO gw1000: user.gw1000: field map is {'24havpm251': '24havpm251', '24havpm252': '24havpm252', '24havpm253': '24havpm253', '24havpm254': '24havpm254', 'UV': 'uvi', 'aqiPm251': '24havpm251', 'aqiPm252': '24havpm252', 'dateTime': 'datetime', 'dayRain': 'rainday', 'daymaxwind': 'daymaxwind', 'dewpoint': 'dewpoint', 'extraHumid1': 'humid1', 'extraHumid2': 'humid2', 'extraHumid3': 'humid3', 'extraHumid4': 'humid4', 'extraHumid5': 'humid5', 'extraHumid6': 'humid6', 'extraHumid7': 'humid7', 'extraHumid8': 'humid8', 'extraTemp1': 'temp1', 'extraTemp2': 'temp2', 'extraTemp3': 'temp3', 'extraTemp4': 'temp4', 'extraTemp5': 'temp5', 'extraTemp6': 'temp6', 'extraTemp7': 'temp7', 'extraTemp8': 'temp8', 'heatindex': 'heatindex', 'hourRain': 'rainhour', 'inHumidity': 'inhumid', 'inTemp': 'intemp', 'leak1': 'leak1', 'leak2': 'leak2', 'leak3': 'leak3', 'leak4': 'leak4', 'lightning_distance': 'lightningdist', 'lightning_last_det_time': 'lightningdettime', 'lightning_strike_count': 'lightning_strike_count’,

'luminosity': 'light', 'monthRain': 'rainmonth', 'outHumidity': 'outhumid', 'outTemp': 'outtemp', 'pm2_5': 'pm251', 'pm2_52': 'pm252', 'pm2_53': 'pm253', 'pm2_54': 'pm254', 'pressure': 'absbarometer', 'radiation': 'uv', 'rain': 'rain', 'rainRate': 'rainrate', 'relbarometer': 'relbarometer', 'shadowDewpoint': 'dewpoint', 'shadowHeatindex': 'heatindex', 'shadowInHumidity': 'inhumid', 'shadowInTemp': 'intemp', 'shadowOutHumidity': 'outhumid', 'shadowOutTemp': 'outtemp', 'shadowPressure': 'absbarometer', 'shadowRain': 'rain', 'shadowRainRate': 'rainrate', 'shadowStormRain': 'rainevent', 'shadowWindChill': 'windchill', 'shadowWindDir': 'winddir', 'shadowWindGust': 'windgust', 'shadowWindSpeed': 'windspeed', 'soilMoist1': 'soilmoist1', 'soilMoist2': 'soilmoist2', 'soilMoist3': 'soilmoist3', 'soilMoist4': 'soilmoist4', 'soilMoist5': 'soilmoist5', 'soilMoist6': 'soilmoist6', 'soilMoist7': 'soilmoist7', 'soilMoist8': 'soilmoist8', 'soilMoist9': 'soilmoist9', 'soilMoist10': 'soilmoist10’,

'soilMoist11': 'soilmoist11', 'soilMoist12': 'soilmoist12', 'soilMoist13': 'soilmoist13', 'soilMoist14': 'soilmoist14', 'soilMoist15': 'soilmoist15', 'soilMoist16': 'soilmoist16', 'soilTemp1': 'soiltemp1', 'soilTemp2': 'soiltemp2', 'soilTemp3': 'soiltemp3', 'soilTemp4': 'soiltemp4', 'soilTemp5': 'soiltemp5', 'soilTemp6': 'soiltemp6', 'soilTemp7': 'soiltemp7', 'soilTemp8': 'soiltemp8', 'soilTemp9': 'soiltemp9', 'soilTemp10': 'soiltemp10', 'soilTemp11': 'soiltemp11', 'soilTemp12': 'soiltemp12', 'soilTemp13': 'soiltemp13', 'soilTemp14': 'soiltemp14', 'soilTemp15': 'soiltemp15', 'soilTemp16': 'soiltemp16', 'stormRain': 'rainevent', 'totalRain': 'raintotals', 'uvradiation': 'uv', 'weekRain': 'rainweek', 'wh25_batt': 'wh25_batt', 'wh26_batt': 'wh26_batt', 'wh31_ch1_batt': 'wh31_ch1_batt', 'wh31_ch2_batt': 'wh31_ch2_batt', 'wh31_ch3_batt': 'wh31_ch3_batt', 'wh31_ch4_batt': 'wh31_ch4_batt', 'wh31_ch5_batt': 'wh31_ch5_batt', 'wh31_ch6_batt': 'wh31_ch6_batt', 'wh31_ch7_batt': 'wh31_ch7_batt’,

'wh31_ch8_batt': 'wh31_ch8_batt', 'wh40_batt': 'wh40_batt', 'wh41_ch1_batt': 'wh41_ch1_batt', 'wh41_ch2_batt': 'wh41_ch2_batt', 'wh41_ch3_batt': 'wh41_ch3_batt', 'wh41_ch4_batt': 'wh41_ch4_batt', 'wh51_ch1_batt': 'wh51_ch1_batt', 'wh51_ch2_batt': 'wh51_ch2_batt', 'wh51_ch3_batt': 'wh51_ch3_batt', 'wh51_ch4_batt': 'wh51_ch4_batt', 'wh51_ch5_batt': 'wh51_ch5_batt', 'wh51_ch6_batt': 'wh51_ch6_batt', 'wh51_ch7_batt': 'wh51_ch7_batt', 'wh51_ch8_batt': 'wh51_ch8_batt', 'wh51_ch9_batt': 'wh51_ch9_batt', 'wh51_ch10_batt': 'wh51_ch10_batt', 'wh51_ch11_batt': 'wh51_ch11_batt', 'wh51_ch12_batt': 'wh51_ch12_batt', 'wh51_ch13_batt': 'wh51_ch13_batt', 'wh51_ch14_batt': 'wh51_ch14_batt', 'wh51_ch15_batt': 'wh51_ch15_batt', 'wh51_ch16_batt': 'wh51_ch16_batt', 'wh55_ch1_batt': 'wh55_ch1_batt', 'wh55_ch2_batt': 'wh55_ch2_batt', 'wh55_ch3_batt': 'wh55_ch3_batt', 'wh55_ch4_batt': 'wh55_ch4_batt', 'wh57_batt': 'wh57_batt', 'wh65_batt': 'wh65_batt', 'wh68_batt': 'wh68_batt', 'windDir': 'winddir', 'windGust': 'gustspeed', 'windSpeed': 'windspeed', 'windchill': 'windchill', 'ws80_batt': 'ws80_batt', 'yearRain': 'rainyear'}

[gjr80]

That is my mistake. b10 will revert to using [GW1000] for both driver and service.

Gary

[gjr80]

Yes, I have not been happy with the way in which the field_map_extensions are used to update the field map, you can remove those duplicates by adding a blank entry for the WeeWX field name from the default field map but that is somewhat cumbersome.

I have reworked the field map processing code just now and think I have it working better now. As of b10 (just published) any GW1000 'fields' that are included in the field_map_extensions are first removed from the field map and then the field map is updated with the field_map_extensions entries.

Gary